Providing Furniture items for New Family Court as per Existing Courts in District Court Complex, Sector -43, Chandigarh

Providing & supply of Wooden slider glass door Almirah for Court room, size-6’-6” x 4’. Made of 18mm thick commercial board, finish with 4mm thick teak ply with 6mm thick glass shutter & Finish with PU polish. Complete in all aspects as per Engineer In charge and as per existing design and measurement of other all courts in the complex. and as per existing design of other all courts in the complex.

Providing & Supply of Court room Wooden table for Hon’ble Judges, size-12’-10” X 3’ X 2’-6”. Made of 18mm thick commercial board, 4mm thick teak ply on front & sides. top of table should be in 1mm thick laminate (as per Existing shade). Edges of table should be fix with 10mm thick teak wood beading. Finish in PU polish. Complete in all aspects as per Engineer In charge and as per existing design and measurement of other all courts in the complex. and as per existing design of other all courts in the complex.

Providing & supply of Wooden Almirah for Court room, size-7’x 4’. Made of 18mm thick commercial board, finish with 4mm thick teak ply both inside & outside & Finish with PU polish. Complete in all aspects as per Engineer In charge and as per existing design and measurement of other all courts in the complex. and as per existing design of other all courts in the complex.

Providing & Fixing of Wooden laminated Stage in Court room for Hon’ble Judges, size-12’-10” x 9’-1” x1’-3”(H). Complete in all aspects as per Engineer In charge and as per existing design of other all courts in the complex.

Providing & Fixing of Wooden laminated steep step with stage in Court room for Hon’ble Judges, size-4’-2” x 3’ x1’-3”(H). Complete in all aspects as per Engineer In charge and as per existing design of other all courts in the complex.

Providing & Fixing of wooden wall Partition in Court room, size-8’-5” X 7’ Made of 2” X 2” partal wood frame. Finish with 4mm thick teak ply both side with 32” Door. Finish with PU polish. Complete in all aspects as per Engineer In charge and as per existing design of other all courts in the complex.

Providing & Fixing of Wooden laminated Stage in Court room for Readers, size-12’-10” x 4’-6” x 6”. Complete in all aspects as per Engineer In charge and as per existing design of other all courts in the complex.

Providing & Supply of wooden readers table in Court room, size-4’X2’ with one drawer & one keyboard tray. Made of 18mm thick commercial board, side finish in teak ply & top should be in 1mm thick laminate(as per existing shade). Finish in PU polish. Complete in all aspects as per Engineer In charge and as per existing design of other all courts in the complex.

Providing & supply of Wooden Almirah for Court room, size-3’-9” x 3’. Made of 18mm thick commercial board, finish with 4mm thick teak ply both inside & outside & Finish with PU polish. Complete in all aspects as per Engineer In charge and as per existing design of other all courts in the complex.

Providing & supply of wooden witness Box , size-4’-6” x 4’. Made partal wood frame with both side teak ply. Finish with PU polish. Complete in all aspects as per Engineer In charge and as per existing design of other all courts in the complex.

Providing & Supply of Court room Wooden presenting/Advocate table , size-12’-10” X 2’-6” X 2’-6”. Made of 18mm thick commercial board, 4mm thick teak ply on front & sides . Top of table should be in 1mm thick laminate(as per Existing shade). Egdes of table should be fix with 10mm thick teak wood beading. Finish in PU polish. Complete in all aspects as per Engineer In charge and as per existing design of other all courts in the complex.

Providing & Supply of Advocate wooden reading table, size-1’-7” X 1’-2” X 1’-3”(H). Made of 18mm thick commercial board, 4mm thick teak ply on front & sides . Top of table should be in 1mm thick laminate(as per Existing shade). Complete in all aspects as per Engineer In charge and as per existing design of other all courts in the complex.

Providing & Supply of wooden table in Court room, size-5’X3’ with one drawer & one Shutter. Made of 18mm thick commercial board, side finish in teak ply & top should be in 1mm thick laminate(as per existing shade). Finish in PU polish. Complete in all aspects as per Engineer In charge and as per existing design of other all courts in the complex.

Providing & Supply of Steel table with wooden laminated top, size-4’ x 2’. With three nos of drawers ,one keyboard tray & one shelf. Complete in all aspects as per Engineer In charge and as per existing design of other all courts in the complex.

Providing & Supply of Steel table with wooden laminated top, size-5’ x 3’. With three nos of drawers ,one keyboard tray & one shelf. Complete in all aspects as per Engineer In charge and as per existing design of other all courts in the complex.

Providing & Supply of Steel Almirah, size-6’-6” X 3’ with 5 shelfs. Body made of 22 guage sheet & Doors of 20 guage sheet. Complete in all aspects as per Engineer In charge and as per existing design of other all courts in the complex.

Providing & supply of wooden office table with side extension for Hon’ble Judges Chamber room, size-7’ x 3’-6” top. Made of 18mm thick commercial board. Finish with 4mm thick teak ply on both sides & front also. Top of table should be in 1mm thick laminate(as per existing shade). Table should have one drawer & one shutter . Side extension should have three drawers & one shutter. Complete with handles. Finish in PU polish. Complete in all aspects as per Engineer In charge and as per existing design of other all courts in the complex.

Providing & supply of Wooden Almirah for Hon’ble Judges chamber room, size-7’ x 4’. Made of 18mm thick commercial board, finish with 4mm thick teak ply both inside & outside . inside half shelfs & half side provision for one hanger rode. Finish with PU polish. Complete in all aspects as per Engineer In charge and as per existing design of other all courts in the complex.

Providing & supply of wooden Dressing for Hon’ble Judges chamber room, size-5’ X 1’-7”, with one drawer one looking mirror, made of 18mm thick commercial board with 4mm thick teak ply. Finish with PU polish. Complete in all aspects as per Engineer In charge and as per existing design of other all courts in the complex.

Providing & Supply of wooden glass top Coffee table Hon’ble Judges chamber, size-18” x 18” x 18”. Made of 1st class teak wood with 8mm thick glass on top. Finish with PU polish. Complete in all aspects as per Engineer In charge and as per existing design of other all courts in the complex.

Providing & Supply of wooden top Coffee table Hon’ble Judges chamber, size-18” x 18” x 18”. Made of 1st class teak wood. Finish with PU polish. Complete in all aspects as per Engineer In charge and as per existing design of other all courts in the complex.

Providing & supply of 1st class teak wood office chair for Hon’ble Judges Chamber. Seat & back should be upholstered in fabric(as per approved shade), with 32 density foam. Finish with PU polish. Complete in all aspects as per Engineer In charge and as per existing design of other all courts in the complex.

Providing & Supply of Wooden single seater sofa for Hon’ble Judges Chamber. Frame made of pine wood , with 32 density foam. Visible wood will be of 1st class teak wood on arms. Sofa upholstered in fabric(as per approved shade). Finish with PU polish. Complete in all aspects as per Engineer In charge and as per existing design of other all courts in the complex.

Providing New Upholstered Furniture with Teakwood frame and Faux Leather as per Original Furniture Design as detailed in the drawings of the items. The size and design of the Furniture to be replicated exactly as per the Original Furniture used for reference as marked in drawings and only after approval of one sample Furniture piece shall other similar pieces be replicated. The foam (50 density of make Jindal or equivalent) cushion in seat shallbe 4" & in the back 2" thick (50 density of make Jindal or equivalent) shall be got approved from the authorities before using for the furniture. Well Seasoned teak wood to be used for the Framing and polished of approved shade and type. Faux Leather of superior quality and approved type, colour and texture to be used for Upholstery. Item to include necessary sampling, well seasoned teak wood, cushioning, Faux Leather Upholstery, hardware, tools etc. and required to complete the item in all respects and to the entire satisfaction of the Engineer in charge and as per existing design of other all courts in the complex.

Single seater with ARM

Three seater without ARM

Providing greta chair (revolving)with headrest with following specifications.The Required Chair Specification. 1. SEAT ASSEMBLY – The seat is made up of 1.4±0.1 cm thick – pressed plywood upholstered with fabric and moulded polyurethane foam.2. BACK ASSEMBLY–The back is injection moulded in Glass filled Polypropylene which is upholstered with Mesh fabric .The back consist of adjustable Lumbar support made of injection moulded Polypropylene having an adjustment of 5.0 ±0.1cm. Back Size : 44.5 cm(W) × 57.5cm (H)3. POLYURETHANE FOAM–The polyurethane foam for seat is of density = 30±2kg/m3.4. ARMRESTS ( AJUSTABLE) – The height adjustable armrest is made of Polypropylene and can be adjusted to 6.0 ± 0.01 cm height .It also has swivel and To and Fro adjustment with moulded PU armtop. 5. MECHANISM – The mechanism is designed with the following features. • 360 degree revolving type.• Centre tilt syncro.•4 position (including upright lock) giving option of variable tilt angle to the chair.6.HEADREST –The Headrest is made up of injection moulded Polypropylene which upholstered with foam and fabric . Its has an adjustment of 3.0 ± 0.1 cm & its assembled over Chair.7. PNEUMATIC HEIGHTADJUSTMENT – The pneumatic height adjustment is chrome plated with an adjustment stroke 0f 10.0 ± 0.3 cm .8. PEDESTRAL ASSEMBLY – The pedestal is injection moulded Nylon and fitted with 5nos. twin wheel castors . The pedestal is 66.0 ± 0.5 cm P.C.D.9. TWIN WHEEL CASTORS –The twin wheel castors are injection moulded in black Polypropylene having 5.0 ± 0.01cm wheel Diameter. Work shall be carried out complete as per direction & satisfaction of Engineer in charge.

providing poise chair(revolving)with following specifications.Poise ChairThe Required Chair seat assembly shall be made up of 1.2 ±0.1cm. thick hot-pressed plywoodand shall be upholstered with fabric upholstery covers and moulded Polyurethane foam. Thedimensions of seat shall be 47.0 cm. (W) x 48.0 cm. (D). The back asembly shall be made ofpowder coated (DFT 40-60 microns) tubular frame of dia 2.54 ±0.03cm. x 0.2±0.016cm thk.MS ERW tube designed with contoured lumbar support for extra comfort. The back shall be upholstered using Net fabric with high tenacity yarn. The dimensions of back shall be 46.5 cm (W) x 60.5 cm (H). The HR polyurethane foam shall be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. The one-piece armrests shall be injection moulded from black Co-polymer Polypropylene. The mechanism shall be designed with 360° revolving type, 17±2° maximum tilt m pivot at centre, Upright position locking., Tilt tension adjustment. The pneumatic height adjustment shall has an adjustment stroke of 11.0 ±0.3cm. The bellow shall be 3 piece telescopic type and injection moulded in Black Polypropylene. The pedestal shall be injection moulded in black 33% glass-filled Nylon66 and fitted with 5 nos. twin wheel castors. The pedestal is 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors). The twin wheel castors shall be injection moulded in Black Nylon. Overall Dimensions of Chair shall be Seat Height - min 43.3 to max 54.3cm, Height - min93.5 to max 104.5cm, Width & Depth of Chair as measured from pedestal - Width-76.3 cm and Depth-76.3 cm.Work shall be carried out complete as per direction & satisfaction of Engineer in charge.