Creation of 100 kVA Sub Station along with HT and LT Network at Harran Colony Village Brinty Dialgam Anantnag for ED Anantnag under UT Capex 2024-25

Amount

Supply,installation,Testing,Commissioning,Carriage,Loading and unloading at site (Sub-Station)

100 kVA,11/0.433kV, 3-phase Distribution Transformers with Bimetallic Terminal Connectors Energy Level-2,(Al Wound) , ( redesignated as Level 1 ) and with LV Cable Box having detachable Al. Gland plate with LV Bimetallic terminal connection suitable for vertical take off of cable..

11 kV Gapless Surge Arrestor,9 kV ,10 kA ,LA with polymer housing, Stn. Type

11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type

11 kV Horn Gap Fuse Set 3 Phase 200A

185 mm² single core Cable,1.1kV Grade, XLPE Insulated Stranded Conductor FRLS type

9 Mtr. Long Pole,(ST-410 SP33)

GI Channel/Angle/Flat of sizes including clamps

Galvinized Nuts and Bolts.

Earthing of substation (05 Nos :LA SET,Neutral,Body (Dual) and GO AB Switch Handle) --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body(dual earthing for body),G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover.

Earthing of Poles Complete by GI Pipe 40 mm or GI Rod 20mm 2.5mtr long through GI Strip 25x3 mm

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

LT fuse Set as per KPDCL Drawings available on portal

Wedge Connectors / PG Clamps

Danger Plates with Clamps

GI Barbed Wire for Anti Climbing with clamps.

Cement bottoming 1:2:4 mix as per Standards 0.48 cum/pole

Red Oxide(one coat) and Almunium paint(2 or more coats so as to obtain smooth finish)

Sundry items like Aluminium lugs, Jumpers, Binding Tape etc

Supply,installation,Testing,Commissioning,Carriage,Loading and unloading at site (HT)

GI Channel/Angle/Flat of sizes including clamps and Nuts and Bolts

ACSR 50 sqmm(Rabbit)

Galvanized Nuts and Bolts

Supply,installation,Testing,Commissioning,Carriage,Loading and unloading at site ( LT )

8 Mtr. Long Pole(ST-410 SP15)

ACSR 50 sqmm(Rabbit)

LT Mukhi Clamps with Shackles (16kN) including Nuts and Bolts

Earthing of Poles Complete by GI Pipe 40 mm or GI Rod 20mm 2.5mtr long through GI Strip 25x3 mm

Danger Plates with Clamps

Anti climbing Devices with Clamps

Red Oxide(one coat) and Almunium paint(2 or more coats so as to obtain smooth finish)

Cement bottoming 1:2:4 mix as per Standards 0.45 cums /pole

M/S SHOWKAT ELECTRICALS (BID ID -2235958)

NAZEEM ELECTRICALS SUPPLIERS (BID ID -2236090)

FERIHA ELECTRICALS (BID ID -2236167)

M/S ASHTI ELECTRICAL (BID ID -2235352)

Khadmat Electricals Contractor (BID ID -2229996)

M/S BHAT ELECTRONICS (BID ID -2235851)

BHAT ELECTRICAL (BID ID -2234793)

Reaching Rays Infra Electricals (BID ID -2233431)

sunrise electrical prop shahid bilal itoo (BID ID -2235925)