Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
₹35,846
Closing Date
15 Dec 2023, 6:00 pmClosed
SUB DIVISIONAL ENGINEER CIVIL
Sub-Divisional Engineer (Civil), BSNL Civil Sub-Division, CTO Compound, Varanasi-221002
Annual repair and maintenance of Staff Quarter and other miscellaneous civil works in Type III Q No 2 Peernagar T E Compound Distt Ghazipur
2023_BSNL_177209_1
13/2023-24/EEBSNLCD/VNS
Open Tender
Civil Works
Item Rate
30 days
GHAZIPUR
Please refer Tender documents.
2 documents required · 2 mandatory
₹177
Accounts Officer Claim BSNL GMTD Varanasi
22 Dec 2023
8 Dec 2023
18 Dec 2023
8 Dec 2023
15 Dec 2023
8 Dec 2023
8 Dec 2023 - 15 Dec 2023
Amount
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources).
Centering and shuttering including strutting, propping etc. and removal of form for :
a) Shelves (Cast in situ)
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
a) Thermo-Mechanically Treated bars of grade Fe-500D or more.
Deduct for not providing hinges in doors, windows or clerestory window shutters with :
a) Stainless steel butt hinges with stainless steel screws :
(i) For 2nd class teak wood and other class of wood shutters.
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
a) 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead :
a) With cement mortar 1:4 (1 cement : 4 fine sand).
White washing with lime to give an even shade :
a) Old work (one or more coats) .
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.
a) Old work (one or more coats) .
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.
a) Two or more coats on old work.
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
a) One or more coats on old work.
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.
a) 10 litre capacity - White
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall
a) 20 mm nominal outer dia. Pipes.
Providing and fixing PTMT stop cock of approved quality and colour.
a) 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms.
Providing and fixing PTMT bib cock of approved quality and colour.
a) 15mm nominal bore, 86 mm long. Weighing not less than 88 gms.
Credit for unserviceable item
a) GI pipe 20 mm
M/S PRATIBHA CONSTRUCTION
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .