Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.1 LAccepted-AOC S NO 7 3 FLAT NO 4 HILL VIEW RESIDENCY LOHEGAON PUNE 411047 | PUNE | MAHARASHTRA | 411047 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹19.5 L+₹4.1 L (26.4%)Rejected-Finance | L2 | Rejected-Finance High Rate | |
| 3 | L3₹21.5 L+₹6.0 L (39.0%)Rejected-Finance | L3 | Rejected-Finance High Rate |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
24 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (Central) Pune
Garrison Engineer (Central) Pune, Arjun Marg, Pune-411001
8377 CERTAIN REPAIRS / REPLACEMENT OF B/R ITEMS IN CHUSHAL LINES OFFICERS / JCOs / ORs MD ACCN AND CERTAIN OTM ACCN OF AIPT AND APTC DEPOT UNDER CE (CENTRAL) PUNE
2022_MES_567066_1
8377 CERTAIN REPAIRS/ REPLACEMENT OF B/R ITEMS IN
Open Tender
Civil Works
Item Rate
150 days
GE (Central) Pune
As per Tender NIT
9 documents required · 9 mandatory
₹500
GE (Central) Pune
₹50,000
Yes
4 Feb 2023
3 Dec 2022
26 Dec 2022
3 Dec 2022
24 Dec 2022
12 Dec 2022
Amount
Taking down shutters only area exc 1.00 Sqm but not exc 2.00 Sqm each all as specified.
Taking down Shutters of any description not exc 1.00 Sqm each and refixing in the same opening after carrying out necessary adjusting / minor repairs etc all as directed.
All as per item No 2 above but exc 1.00 Sqm and Not exc 2.00 Sqm each all as directed.
Taking down chowkats or frames with shutters w/o taking off shutter from the frame area not exc 1.50 Sqm each complete and making good disturbed portion of jambs with PCC 1:3:6 type C1 using 20mm graded stone aggregates including plastering, finish as required etc all as specified and as directed.
Taking down chowkats or frames with shutters w/o taking off shutter from the frame area exc 1.50 Sqm but not exc 4.00 Sqm each and making good disturbed portion of jambs with PCC 1:3:6 type C1 using 20mm graded stone aggregates including plastering, finish as required etc all as specified and as directed.
S & F pressed steel frames 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complet all as specified.
All as per item No 8 above but size105 x 60mm.
M & L for Cement concrete 1:3:6 type C1 (20mm graded stone aggregates) for filling of pressed steel frame and hold fast block cutting etc complete all as specified.
Supply and fixing 35mm thick 2nd class hardwood factory made plain framed panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces . the size of rail and stile as per IS: 1003 ( Part -I) kiln seasoned and chemically pressure treated. complete fixed to chowkats all as specified and as directed.
S & F 30mm thick flush shutters, solid core onstruction, with block board core and plywood face panels, commercial type on both sides, one face is covered with decorative face veneer with lipping/frame to match complete all as specified and as directed.
Supply and fixing (factory Made) 2nd class hard wood 35 mm thick glazed and skelton shutters open rebated and prepared to receive gauge. (Without sash bars ) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I section 8 clause 8.20 (a) supplied and fitted to chowkats complete all as specified and as directed.
S & F factory made wood grain printed (Prelaminated) solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes 19 mm x 19 mm having wall thickness 19 gauge for stiles. MS tube 15mm x 15mm having wall thickness 19 mm gauge for top and bottom rails. MS frame shall be covered with 5mm thick heat moulded prelaminated colour PVC 'C' channel having 5mm thick PVC sheet strip 20mm wide struck inside with solvent cement for stiles and 5mm thick PVC sheet for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2mm) thick, 20mm wide cross PVC sheet as gap insert for top and bottom rail. Paneling of 5mm thick prelaminated colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5mm x 30 mm PVC sheet beading and jointed together with solventcement complete all as shown in drg give on page 176 of SSR 2020 Part II The width of stiles and rails shall be as specified in para 8B.2.1 on page 145 of SSR 2020 part II. Each PVC door shutter leaf consist of 4 Nos 100 mm long MS butt hinges. complete all as specified and directed.
S & F Factory made wood grain printed (Prelaminated) solid PVC single door frame of size 50 x 47mm with a wall thickness of 5mm prelaminated colour sheet reinforced with 19 mm x 19mm MS square tube having wall thickness 19 guge complete all as shown in sketch on page 180 of SSR 2020 Part II complete all as specified and directed.
S & F anodised powder coated window shutters in three track sliding (whichever the case may be ordered to sliding horizontally or vertically) with two or more shutters with sliding arrangement with two or more shutter rubber beading and glazing clips using aluminium sections weighing not less than 0.55 Kg/Mtr etc complete with necessary hardware i.e. locking mechanism, handle and 4.8mm thick selcted quality glass for glazing and stainless steel wire cloth 0.71mm dia with width of aperture 1.18mm including necessary gasket / neoprene / rubber packing / beading etc all as specified and directed
S & F louvers glass ventillators with partially guaged shutter using 5 mm thick x 10 cm wide frosted glass strips with following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading and all necessary fittings as required etc complete all as specified and as directed. (a) SP 20048 (b) Glazing clips 19352
Supply and fixing stainless steel wire 0.71mm dia fixed with tinned tacks average width of aperture 1.18mm complete all as specified.
S & F 150mm extruded aluminium alloy powder coated handles , fabricated type complete all as specified.
S & F 150mm long Aluminium powder coated barrel tower bolt of extruded section all as specified and as directed.
S & F 100mm MS butt hinges medium weight , cold rolled complete all as specified and as directed.
S & F for 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.
S & F in repair aluminium powder coated curtain rails 25mm dia with rings @ 10cm c/c etc complete all as specified.
S & F in repair aluminium powder coated brakcet, knobs,complete all as specified.
Supply and fixing in repair 300 mm, ordinary rat tail rod pattern springs of mild steel including roller and roller plate complete all as specified. .
Supply and fixing in repair stainless steel wire cloth 0.56mm nominal dia of wire and average width ofaperture 1.18mm all as specified.
S&F mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, door chowkats of angle or other section and similar works complete of Gde Fe-290 Gde E-165 including welding etc.
M & L preparation of new or previously untreated surfaces of steel of any description over 10cm width or girth not otherwise described over applying two coats of synthetic enamel paint over a coat of a red oxide zinc primer all as specified. .
M & L for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer all as specified.
Dismantling floor, heath or wall tiling including cement mortar bedding (but not backing) and removal of debris out side defence land complete all as directed .
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided and removal of debris out side defence land complete all as directed.
M & L for 100mm thick levelling course / sub base in cement concrete type D-2 1:4:8 using 40mm graded stone aggregate complete all as specified and as directed.
M & L for 50mm thick levelling course in cement concrete type B-1 1:2:4 using 20mm graded aggregate complete all as specified and as directed.
M & L for 25mm thick levelling course in cement concrete type B-1 1:2:4 using 20mm graded aggregate complete all as specified and as directed.
Material and labour Virified Ceramic tiles Double charge light shade (square/ rectangular) polished, of size 600mm x 600mm x 10mm thick in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over & including 15mm thick screed bed in CM (1:6) etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles all as directed and specified.
Material and labour Virified Ceramic tiles Double charge (light shade) of size 600mm x 600mm x 10 mm thick (square/ rectangular) polished, as in skirting, set and jointed in neat cement slurrry and pointed in white or coloured cement to match, over & including 10mm thick backing coat in CM (1:4) all as directed and specified.
Material and labour for Non skid coloured ceramic tiles of size 600mm x 600mm x 10mm thick (Square / rectangular) over & including 15mm thick screed bed in CM (1:6) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles all as directed and specified.
Material and labour for Non skid coloured ceramic tiles of size 400mm x 400mm x 7 to 8mm thick (Square / rectangular) over & including 15mm thick screed bed in CM (1:6) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles all as directed and specified.
M & L for coloured glazed ceramic tiles of size 450 x 300 x 7 mm thick as in vertical surface set and jointed in neat cement slurry and pointed flush in white cement with pigment over and including 10mm thick baking coat of CM 1:4 complete all as specified.
M & L for Shingle filling (size of particles less than 6mm) laid in layers not exc 15cm thick, spread, levelled, and blinded with earth and rammed including watering for laying interlocking tiles below interlocking tiles complete all as specified complete all as specified and as directed.
M & L for rubber moulded glossy chequered cement concrete tiles 30cm x 30cm x 20mm thick, set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.
M & L 20mm thick granite (of any type) work table rubbed and polished in steps, jambs, pillars, window cills, cooking platforms, floor / skirting / risers or as in vertical support or counter top for wash basin and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixtures of pigment to match with shade of granite over and including 15 mm thick screed layer in CM 1:3 with edges polished / rounded as ordered incuding cutting circular or eliptical hole in granite slab and fixing in position complete and ensure best adhesion to surface complete all as specified and as directed.
M & L for machine cut cudappah stone slab 20 to 25mm thick for vertical supports of kitchen platforms and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing of the exposed face complete all as directed and specified
M & L for 50mm thick cement concrete type C – 1 (1:3:6) using 20mm graded stone aggregate as in plinth protection and PCC paved area, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.
M & L for preparation of old plastered or unplastered surfaces of wall by brooming / wire brushing / removal of loose scales / dusts / unwanted particles by mechaincal means and applying one coat of white wash complete all as directed and specified.
All as per item No 45 above but in ceiling complete.
M & L for preparation of old plastered or unplastered surfaces of wall by brooming / wire brushing / removal of loose scales / dusts / unwanted particles by mechaincal means and applying one coat of cement based paint complete all as directed and specified.
M & L for preparation of old plastered or unplastered surfaces of wall by brooming / wire brushing / removal of loose scales / dusts / unwanted particles by mechaincal means and applying one coat of oil bound distemper on wall surface to give uniform and smooth surface complete.
All as per item No 48 above but in ceiling complete.
M & L for preparation of old plastered or unplastered surfaces of wall by brooming / wire brushing / removal of loose scales / dusts / unwanted particles by mechaincal means and applying one coat of acrylic emulsion (plastic emulsion paint) complete all as directed and specified.
M & L for complete removal of existing treatment on walls (any number of layers ) by scrapping with mechanical means and applying two coats of oil bound distemper over one coat primer over and including 2mm thick wall care putty complete all specified and directed.
M & L for rendering 10mm thick in cement mortar 1:6 on brick / concrete surfaces finished even & smooth with a thin layer of sagol finish in patches work including taking down cement or cement lime plaster, any description, on brick or concrete surfaces etc complete all as specified and directed.
M & L for rendering 15mm thick in CM (1:4) in two layers, 5mm thick in CM (1:4) over a coat of 10mm thick in CM (1:4) surface finished with sponge finish in patches work including taking down cement or cement lime plaster, any description, on brick or stone walls, etc complete all as specified and directed .
M & L preparation of newly plastered surfaces of walls of any description and applying two coats of oil bound distemper over one coat primer over and including 2mm thick wall care putty complete all specified and directed.
M & L Preparation of new plastered or unplastered surfaces of wall and applying three coats of white wash all as directed and specified.
M & L Preparation of new plastered or unplastered surfaces of wall and applying two coats of cement base paint on wall all as directed and specified.
Suma Construction
J D Contruction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .