WELCOME MAINT AND CLEANING OF OHT INCL REPAIRS TO SANITATION AREA, TOILET AND BATH FITTING INCL OTHER MISC B/R ITEMS IN MOORA AND NSV AND MHADA AREA AT MO (MB) GHATKOPAR UNDER GE (NW) BHANDUP

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises etc out side MD land complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in kitchen platform and similar work laid, bedded and pointed in cement mortar and removal of rubbish/ demolished materials out of MD land complete all as specified and directed

Taking down cement plaster or lime plaster of any description from stone or brick wall etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish out side of MD land complete all as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutter from the frames) and including grills/ guard bars exceeding 1.5 Sqm and n exc 4 sqm each complete as directed

Taking down chowkat or frame with shutter (without taking off shutter from the frames) and including grills/ guard bars not exceeding 1.5 Sqm each complete as directed

Taking down cup board and wiremesh or panelled shutter of any description, exceeding 1.0 Sqm and n exc 2 sqm each complete all as specified and directed.

Taking down wooden cup board shutters of any description, not exceeding 1.0 Sqm each complete all as specified and directed.

Resecuring or easing and adjusting, without taking down shutters of any description not exc 1 sqm each complete all as specified and directed .

Resecuring or easing and adjusting, without taking down shutters of any description exc 1 sqm each but not exceeding 2 Sqm each complete all as specified and directed.

S&F Flush shutter 40 mm thick , solid core construction, with block board core and plywood face panel, commercial type on both side

S&F 35mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain cham-fered or rounded, mitred and rebated sash bars, any numbers The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed by Engineer-in-Charge. (Note :- S & F wire mess shall be measured and paid for separately)

S&F in plain solid straight chowkats IInd class hardwood and frame, wrought, framed rebated on the solid, rounded or chrmfered, put together with glue pinned at joints

S&F in repair 40mm dia cupboard Knobs fixed with necessary screws, nuts etc all as specified and directed

S & F 300 mm long Aluminium,ISI Mark anodised, barrel tower bolts of extruded section and fixed

S & F 150 mm thick Aluminium,ISI Mark anodised, barrel tower bolts of extruded section and fixed

S&F 150mm size aluminium ISI Mark handles, cast type anodised completed all as specified and directed.

S&F 100 mm size butt hinges ISI Mark medium weight stailess steel colled rolled complete all as specified and directed by Engineer-in-Charge.

S&F 300mm size ordinary mild steel , rat tailed rod pattern spring including roller and roller plate welded to mild steel frame.fixed in repair complete all as spd & directed.

S&F 300 mm long mild steel sliding door bolts plate type stone enamelled black with bright bolt not less than 16 mm dia with and including a minimum of 6 bolts and nuts, 04 Nos on bolt plate and 02 Nos on staple plate and fix complete all as specified and directed

S&F 300 mm long Stainless steel sliding door bolts( without locking arrangements) ISI Mark not less than 16 mm dia with and including a minimum of 6 bolts and nuts, 04 Nos on bolt plate and 02 Nos on staple plate and fix with as welding complete all as specified and directed

S&F in repair 300mm,ISI Mark ordinary rat tail MS rod patttern springs includding roller and roller platewith fixed to wooden/pressed steel frame chowkats with flat iron 40x3mm size 75 cm long with necessary bolts, etc. complete

S&F Godrej Mortise ISI Mark main door lock ,stylish finish ,silver colour key lock in zinc alloy material incliding complete fittings complete all as specified.

S & F 25mm thick, block board grade 2 quality interior grade decorative type with decorative face veneer on both face fixed as in shutters.

S&F ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed, complete all as specified.

S&F in repairs 40mm dia and 75mm long, extrruded fancy type SS handle for kitchen cup boards shutters, cabinets, crocery shelf drawers fixed with nuts , screw and washer of mild steel bright finished , complte all as specified.

S & F in repair 150 mm long floor door stopper of aluminium alloy body and tongue, brass body and tongue with hard drawn steel spring. Fixed in door

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick single side prelam PVC sheet used instead of Plain colour PVC sheet , suppling & fixing in opening as per specification & drawing

S&F 30 mm thick factory made both side Prelam PVC sheet used instead of Plain colour PVC sheet. Stile and rails feathered at edges consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F aluminium section in doors/ windows /kitchen cuboards ,any type, powder coated in approved colour (Thickness of powder coating not less than 50 micron), aluminium section (medium weight of series 'B') or section as directed by Engineer-in-Charge, cut to size, jointed together with cadmium plated steel screws including rubber beading or gasket for aluminium sections for fixing bakelite sheet and all necessary fittings complete, screws,plugs, locking arrangements for cuboard, Nylon ball bearing ,hinges,handle,tower bolt, etc all as specified and directed (Make : JINDAL/HINDALCO) Notes : (i) Weight of aluminium sections shall only be measured. (ii) The supply only rate of bakelite sheet will be measured separately.

S&F aluminum anodised grill DG- 202 ( 10 mm x 8mm ) of Deco grill or equivalent fixed with 'F' section ( Min wt should not be less then 3.6 kg /sqm) of approved make all as specified and directed. Note : (i) Make shall be of M/s Decogrille of M/s Associated Groups or equivalent as approved by the GE. (ii) Minimum thickness of anodizing shall be 15 microns.

Supply only 4.80mm thick ordinary quality plain not exc 0.5 Sqm each pane with including wooden/rubber beading or gasket for aluminium section complete all as specified.

Supply only stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of aperture 1.40 mm , fixed in aluminium windows complete all as specified and directed.

M&L for 18-19mm thick block boards, grade - I quality, exterior grade, decorative type with decorative face veneer on both sides with external teak wood lipping, 6mm thick alround fixed with screws to timber frame work etc, complete all as specified and directed..

M&L for 12mm veneered decorative plywood, grade 1 (with BWR resin), pre-laminated one side with decorative veneer choice lamination and other side white lamination fixed with screw to timber frame as in cuboards&pelmet boxes including 6mm thick teak wood lipping,complete all as specified and directed

Hacking out old brocken glass (any thickness, size, quality or description) from wooden frame or stone, concrete or brick surrounding, glazed with putty or fixed with beads.

M&L for 4.0mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 Sqm in each pane.

S &F, in repairs, aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with in wooden windows, doors etc,and fixing of teak wooden beeding complete all as specified and as directed by the Engineer in charge.

M/L for rendering 12 mm thick in CM 1:6 on brick walls finishing with sagol even and smooth (with out using extra cement)etc complete all as specified and directed.

M & L for rendering 5 mm thick in CM 1:3 on concrete surfaces as in ceiling and finishing the surfaces even and smooth finish complete all as specified and directed.

M/L for 15mm thick rendering(10+5) in CM 1:4 on external surface of wall mixed with water proofing compound and shall be scored to provide key for rough finishing coat. including necessary scaffoldings etc complete all as specified and directed Note:- WPC shall be measured and paid seperately.

Supply only integral water proofing compound.

M&L for removal of loose and disintegrated concrete of RCC structural members viz slab, beam, column and lintel etc by low impact hammer including removal of debris outside MD land. Cleaning of exposed reinforcement bars with wire brush and apply two coats of anti-rust protective chemical at suitable intervals all as per manufacturer's instructions to resist further deteoration of reinforcement bars. Apply approved epoxy based bonding coat on concrete surfaces to achieve sound bond between existing and new concrete. M&L for profilling of structural members with polymer modified mortar 1:3 mixed with and including 15% latex polymer by weight of cement (w/c ratio 0.35) including leveling to match the surface. Application of complete treatment shall be through approved applicator all as per manufacturers instructions (Bauchemic Krishna or Sunanda) including scaffolding for following 20mm average thickness of polymer modified mortar complete all as specified and directed

M&L for filling cracks with polymer based chemical (Dr fixit cracks shrink free or equivalent) for cracks not exc 10 mm in width as per manufacturer instruction on wall surfaces on concrete or masonary including scaffolding etc complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying Two coat of oil bound distemper including application of white cement based wall care putty finish (3mm thick) for smooth finish.etc complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying two coats of OBD complete all as specified and directed

M&L preparation of new plasterd surfaces of wall and applying two coats of Dr fixit rain coat over one coat of Dr fixit primer all as spd and directed by Engr-in-Charge

M&L preparation of new wooden surfaces of any description and girth, not otherwise described over 10 cm width or girth and applyind one coat of pink primer and two coats of synthetic enamel paint all as spd and directed by Engr-in-Charge

M&L for preparation of old decorated surfaces of ceiling brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and thereafter applying TWO coat of oil bound distemper complete all as specified and directed.

M&L for preparation of old decorated surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and thereafter applying with roller Two coat of oil bound distemper including application of white cement based wall care putty finish (3mm thick) for smooth finish.etc complete all as specified and directed.

M&L for preparation of old decorated surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and thereafter applying with roller one coat of oil bound distemper including wherever necessary filling of nail holes/ inequalities with Putty for smooth finish.etc complete all as specified and directed.

Preparation of Old surface of wall by filling cracks by fill paste of Asian or equivalent make as approved by GE , removing loose paint etc ,removing nails etc and making good surface by applying two coat of white birla / JK wall care putty in complete area ,smoothen surface by sand paper and applying two coat of Royale of asian over coat of primer. complete all as spd &directed .

M&L for preparation of old wooden surfaces of any description, not other wise described, over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old decorated steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F machine cut and machine polished, green marble, 18-20mm thick on horizontal or vertical surface,as in window cills and jambs bedded, jointed and pointed with neat grey cement slurry and pointed with coloured or white cement with pigment to match over and including rendering coat of 10 mm thick in CM 1:4 all as specified and directed.

M&L for 18-20mm thick granite work table rubbed and polished as in jambs, pillars, door and windows-cill, cooking platform , jambs, wash basin platform and the like in cement mortar (1:4) including pointing in white / coloured cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting of oval shape for fixing of counter wash hand basin etc over and including 10mm thick rendering / screed in CM 1:4 on fair faces of brick/concrete surfaces complete all as specified and directed.

M/L for Non-skid ceramic tiles (Coloured) 300x300 mmx 7mm thick in floors etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles 300x200mmx7mm thick in vertical surfaces such as skirting/dado and risers to steps and including over 10mm thick rendering in CM 1:4 on fair faces of brick/concrete surfaces as in backing coat for tiles. etc, all as specified and directed.

M & L 9 to 10 mm thick glazed coloured ceramic tiles ( square/ rectangular) with border , area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in vertical surfaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles ncluding over 10mm thick rendering in CM 1:4 on fair faces of brick/concrete surfaces as in backing coat for tiles. etc, all as specified and directed. complete all as specified and directed.

M&L for vertified ceramic tiles 8-9 mm (light shade of square/ rectangular) polished, area of each tiles not exc 0.36 sqm in floors etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 laying floor finishesed complete all as specified and directed.

M&L for vertified ceramic tiles 8-9mm (light shade of square/ rectangular) polished, area of each tiles not exc 0.36 sqm in vertical surfaces such as skirtings, dados etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match including over 10mm thick rendering in CM 1:4 on fair faces of brick/concrete surfaces as in backing coat for tiles.complete all as specified and directed.

S&F CI floor trap 75mm dia outlet, with CP grating including jointing to waste pipe, fixed in cement concrete type B1 (1:2:4) & taking down old trap complete all as specified and as directed.

S&F CI floor trap 100mm dia outlet, with CP grating including jointing to waste pipe, fixed in cement concrete type B1 (1:2:4) & including taking down old trap complete all as specified and as directed.

S&Fin repair wash down water closet (pedestal pattern) white and including plastic water closet seat cover as per reqd colour with flat bottom and cover and mild steel chromium plated or aluminium hinging device (excluding flushing cistern ) etc complete all as specified and directed..

S&F in repairs vitreous china squatting pan, white, orissa pattern pan of size 580 mm x 440 mm of standard quality with integral foot rests,and including 'P' trap or 'S' Trap complete including connection to trap and to flushing pipe, anti syphonic pipe etc., complete all as specifiedand directed.Make CERA , Paryware ,Eagle .or Tecno Commercial /eqvlt

S&F in repairs wash hand basin, vitreous china white of size 550x 400mm excluding taps, waste chain and plug and porcelain stopper but including brackets,32mm waste fitting and waste pipe of 32 mm bore, brass, chromium plated for glazed ware wash basin and 15mm dia pillar taps chromium plated fancy type etc complete all as specified and directed..Make CERA , Paryware ,Eagle .or Tecno Commercial /eqvlt

Supply and fix in repair 10 ltr, PVC, valveless, syphonic action type, flushing cistern, low level/ high level including inlet, ball valve, float and handle including brackets with and including PVC flush pipe 32 mm bore, connecting to WC etc, complete all as specified and directed..Make CERA , Paryware,Eagle .or Tecno Commercial /eqvlt

S&Fin repair plastic water closet seat cover as per reqd colour with flat bottom and cover and mild steel chromium plated or aluminium hinging device etc complete all as specified and directed..

S&F in repair fancy type chromium plated brass two way Angle valve suitable for 15mm bore pipe complete all as specified and directed.

S&F in repair fancy type chromium plated brass two way Bip cock suitable for 15mm bore pipe complete all as specified and directed.

S&F for CP concealed stop cock 15mm bore fancy type chromium plated.with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs CP angle cock 15mm bore fancy type chromium plated.with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs CP long nose bib tap 15mm bore fancy type with crutch or butterfly handle, screwed for iron pipe or for unions and fixed complete all as specified and directed.

S & F in repairs ISI marked fancy type Pillar Tap of 15mm bore dia, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed

S & F Brass CP health faucet with 8mm Dia 1.0 Meter Long Flexible Tube and Wall Hook screwecd for iron pipe fancy type long body all as specified and directed.

S&F in repairs Brass chromium plated moca wall mixer 3 in 1 fusion , 15mm for mixing hot & cold water screwd down three joints to steel pipes or unions and plugging and screwed to walls complete all as specified and directed Make Jaguar or equivalent

S&F in repair fancy type 15mm dia chromium plated fancy type wall mixer hot & cold with long swan for kitchen sink fixing and connection to pipes complete all as directed. Make Jaguar or equivalent

S&Fin repair 15mm size PVC connection with PTMT nuts 450mm length.complete all as specified and directed.

S&F in repairs stainless steel kitchen plate rack Cat NoP-348 etc complete all as specified and directedMake:Prayag polymers Pvt Ltd or equivalent

S&F stainles steel sink with drainage board , 1 mm thick sheet of steel grade AISI 304 for kitchen or laboratory, with plug, waste pipe, washers including CI cantilever bracket, connecting union etc., overall size 915 x 460 mm with bowl size 410 mm x 330 mm x 160 mm including supply and fixing bib tap CP with long body screwed for iron pipe complete all as specified and directed. Make : Nirali, Bule star ISI marked.

S&F in repairs chromium plated shower roses 125mm size with or without swivel joint including fixing to steel pipe or union etc.complete all as specified and directed. Make:Prayag polymers Pvt Ltd or equivalent

S&F in repair brass chromium plated towel rail 20mm dia 'D' type 600mm long between flanges, Cat No BA -01 of with and including chromium plated brass screws etc complete all as specified and directed. Make:Prayag polymers Pvt Ltd or equivalent

S&F in repair soap dish Cat No BA -25 of Prayag polymers Pvt Ltd or equivalent complete all as specified and directed.

S&F in repair Toilet paper holder cat No BA-58 of Prayag polymers pvt ltd complete all as specified and directed.

S&F in repair Pvc cabinet mirror of size 600X450 mm complete all as specfied and directed. Make: poly tuf or Prayag polymers pvt ltd complete all as specified and directed.

S&F in repair CP corner glass with brass bracket screws etc complete all as specified and directed.

S&F for 20mm dia fancy type chromium plated curtain rods with fixing fancy brackets, brass screws etc complete all as specified and directed

Taking down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 15mm complete all as specified and directed.

Cutting and grooving of wall for fixing of GI pipe lines and after fixing of GI pipe line and making good of all cutting surfaces

S&F 15mm bore U- PVC pipes of pressure rating 10 kgf/cm2 concealed complete to walls, ceilings or in floors etc. with all fittings completed all as specifiec and directed.

Taking down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 20mm complete all as specified and directed.

S&F 20mm bore U- PVC pipes of pressure rating 10 kgf/cm2 concealed complete to walls, ceilings or in floors etc. with all fittings completed all as specifiec and directed.

S&F in repairs ball valve PVC with polythene epoxy coated aluminium rod & high density ball of size 20 mm dia complete all as specified and directed (Make : PRAYAG / SYMET )

S&F in repairs ball valve PVC with polythene epoxy coated aluminium rod & high density ball of size 25 mm dia complete all as specified and directed (Make : PRAYAG / SYMET )

M&L for special treatment for sunken portion of WCs/ Bath & toilet executed in following stages:- Stage 1 :- Demolition of WC including lime concrete and cement concrete coba etc and preparing the surfaces of existing sunken portion of WCs or bath etc with wire brush to remove all loose dirt, oil grease etc including removing debris outside MD land etc Complete. Stage 2:- Providing 10mm thick plaster in CM 1:3 mixed with integral water proofing chemical of Dr. Fixit Pidicrete URP or plaster seal of STP Ltd in the proportion/quantity all as per Manufacture's instructions. Stage 3:- Apply Dr Fixit Primeseal primer or Equivalent of STP Ltd (and allow to dry for 8 hours) all as per Manufacture's instructions. Stage 4:- Apply two coats of water proofing elastomeric coating system of Dr Fixit Raincoats with DFT 100 Micron or shalicry 215 of STP (The surface after painting one coats shall be allowed to dry of 6 hours before next coats) all as per Manufacturer's instructions. Stage 5:- Rendering 10mm thick in CM 1:3 mixed with Integral water proofing chemical Dr Fixit Pidicrete URP or plaster seal of STP Ltd all as per Manufacture's instructions. Stage 6. All CI joints shall filled with mixture of cement fine sand and plaster seal of STP Ltd or Dr Fixit pidicrete URP all as per Manufacture's instruction. Stage 7:- Making holes in wall and fixing 600mm long 40mm dia medium grade GI spout for draining the surplus water if any Stage 8:- Carry out ponding test for 48 hours to ensure water tightness of repaired sunken portion.water tightness of repaired sunken portion and filling of sunken portion for cement concrete Type E2 1:5:10 using 40 mm graded aggregate as in lean concrete complete all as specified and directed. Note :- (a) Only plan area shall be measured and accorded for payment under this item. (b) Depth of sunken portion of WC's/Baths shall be upto 35cm, which is to be taken into account while quoting the rate against this item. (c) Rate quoted by Contractor shall be deemed to be included for all the horizontal and verticale treated surfaces of sunken portions of WC & Bath.

Cleaning of PVC Water tank at any height up to 20mm height ( on accessible/inaccessible on roofs) by removing all scale, dirt, mud ,any foreign material and removing accumulated silt, other dirty substance,algae, fungus and other bacterial material from sides/bottom of tank cleaning shall be done by draining / pumping out water/sludes from bottom removing edge and another growth from wall / floor / roof by high pressure cleaning method with jet set and again claening the tank with fresh water .Disinfecting by using UV radiator and approved chemical ( chloriten) After cleaning writing letter/ figures an black ground with white enamel paint of following capacity cleaning of PVC every six months:- (i) Date of cleaning. (ii) Next due date of cleaning. (iii) Remove of the existing lettering / figures completely.

Deduct Credit for Demolished/ Dismantled material Rs. (-) 19,300.00 (Minus) as listed in Schedule of Credit Note 1:- Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum' Note 2:- The tenderer must keep in mind when quoting rates against items out in multiple store house having height 4 mts to 7 mts. Necessary scaffolding and saftey measures required during execution of work are including in this items.

Ruhi Construction (BID ID -3434159)

SAIRAM CONSTRUCTION (BID ID -3434096)

R J ENTERPRISES (BID ID -3435089)

jkconstruction (BID ID -3434853)

Advait Enterprises (BID ID -3434117)

M/s Mukesh Engineers (BID ID -3440374)