PROVISION OF DEFICIENT MAGAZINE WITH TRAVERSE FOR STORAGE OF AMMUNITION AT INS CHILKA

Amount

Schedule "A" Part – I : NOTE: Schedule "A" Part – I to be quoted by the bidder. Bidders shall insert their Lumpsum amount in Green coloured field under Column - 6 only

Construction of magazine building with RCC framed structure in RCC M-30 grade concrete, brickwall, RCC roof and including ramp of size 3 m x 3 m, NAT type traverse along with toe wall complete all as specified and as shown on drawings and as directed.

Construction of sentry post with RCC framed structure in RCC M-30 grade concrete, brick wall, RCC roof etc, complete all as specified and as shown on drawings and as directed.

Construction of RCC M-30 static water tank of 50,000 litres capacity complete all as specified and as shown on drawings and as directed.

Schedule "A" Part – II to XI: NOTE: Schedule "A" Part – II to Part – XI are prepriced by MES. Bidders shall insert their Lumpsum amount in Green coloured field under Column - 6 only

Lumpsum price worked out by the contractor for "Earthwork Excavation", as listed in Schedule "A" Part – II on Serial Page No.24.

Lumpsum price worked out by the contractor for “ROAD/PATH/CULVERT” as listed in Schedule ‘A’ Part - III , inserted by MES on serial page No. 26

Lumpsum price worked out by the contractor for “AREA DRAINAGE” as listed in Schedule ‘A’ Part - IV , inserted by MES on serial page No. 27

Lumpsum price worked out by the contractor for "FENCING & GATE", as listed in Schedule "A" Part – V on Serial Page No. 29.

Lumpsum price worked out by the contractor for "INTERNAL ELECTRIFICATION", as listed in Schedule "A" Part – VI on Serial Page No. 30.

Lumpsum price worked out by the contractor for "AIR CONDITIONING", as listed in Schedule "A" Part – VII on Serial Page No. 32.

Lumpsum price worked out by the contractor for "LIGHTENING PROTECTION", as listed in Schedule "A" Part –VIII on Serial Page No. 34.

Lumpsum price worked out by the contractor for "FIRE HYDRANT AND FIRE FIGHTING & FIRE ALARM", as listed in Schedule "A" Part – IX on Serial Page No. 38.

Lumpsum price worked out by the contractor for "EXTERNAL WATER SUPPLY", as listed in Schedule "A" Part – X on Serial Page No. 39.

Lumpsum price worked out by the contractor for "EXTERNAL ELECTRIFICATION", as listed in Schedule "A" Part – XI on Serial Page No. 41.

Schedule "A" Part - XII: Miscellaneous Items for Sch "A" Parts - VI to XI are not prepriced by MES and prepriced rate indicated as 0.00 under Col.5 signifies this fact only. Bidder shall insert their rates in Green colour filled under Col-6.

Supply only ABC stored pressure type fire extinguisher 6 Kg capacity consisting of welded cyclinder, sqeeze level discharger valve fitted with pressure indicatingg guage, internal discharge tube, discharge tube, discharge nozzle suspension bracket, confirming to IS-13849 duly charged with ISI marked mono ammonium phosphate base ABC powder conforming to IS-14609 and pressurized with nitrogen gas (ISI marked) complete all as specified and directed.

S&F mechanical foam type 9 Lit capacity fire extinguisher, ISI marked, IS:10204, containing 540 ml AFFF liquid ISIS marked, IS 4989 Part II and polyurethrane coated CO2 gascatridge, ISI marked, IS:4947 complete with gun metal union cap, nylon hose with plastic foam making branch and wall mounting bracket complete all as specified and directed .

S&F portable fire extinguisher system providing supply, installation, testing nad commissioning of CO2 type fire extinguisher 4.5 K capacity confirming to IS:2878 made from ISI marked seamless cylinder conforming to IS:7285, fitted with ISI marked controlled valve confirming to IS:3224, high pressure 1 m discharge hose and horn comlpete with initial gas charged with carrying handle & wall mounted bracket complete all as specified and directed.

S&F buckets of 24 guage galvanised steel, painted white inside and red outside and black on the bottom, inscribed with *FIRE* in black gold and including stand fabricated out of sheet metal (16 guage) shade platform and necessary civil works etc, as approved by fire authority including the following items complete all as specified and directed :- (a) Fire buckets 13.5 ltrs - 04 Nos (b) Sand buckets 13.5 ltrs - 04 Nos (c) Fire hooks - 01 No (d) Fire beater - 01 No (e) Fire alarm bell - 01 No (f) Storage space for 1 cum of sand (g) Axe - 01 No (h) Shawal - 01 No

M&L 2 x 2.5 sqmm PVC insulated sheathed FRLSH copper conductor laying through solid drawn screwed steel conduit pipe in wall / ceiling and including all connected accessories complete all as specified and directed.

Supply install, commissioning, testing and fabrication of LT indoor cubical panel board size 1.50 x 1.20 x 0.40 m by CPRI approved fabricator made of 3.15 mm thick CRCA sheet front operated double door, locking arangement, PCC foundation 300 mm above the ground level and framing with 50 x 50 x 5 mm angle iron, floor mounting type, with 300 Amps aluminium bus bar, powder coated painted including cable glands, epoxy insulation, internal wiring and nuts, bolts, washers etc complete providing suitable size of copper cable / strip as required or as per manufacturers recommendation with the following accessories complete all as specified and directed.:- Note:- (a) The cost for excavation and earth work, PCC covers, sand will be measured and paid separately under relevant items. (b) The cost for glands, cutting the LT UG cable ends and connecting back with appropriate size of lugs, GI nuts, bolts, washers etc, is deemed to be included i the quoted rate.

Supply and fix foot valve confirming to IS 4038, 150 mm (6") dia complete all as specified and directed.

M&L cutting, screwing and tapping of existing steel water pipe line of size 250/150mm dia for connection and branching out of new pipe line by Tee, sockets, union, bends etc as required at the site complete all as specified and directed.

M&L brick masonry valve pit of size 90 x 90 x 90 cm (internal dimension) of sub class 'B' brick built in cement mortar (1:4) on 200 mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in foundation and including PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as in bedding and coping, 15 cm thick cement plastering in CM 1:4 internally and externally upto 15 cm below ground level and providing valve pit cover with 3 mm thick MS sheet, welded with 40 x 40 x 6 mm angle iron frame fixed on top surface of pit wall on edge of the cover and hinged in one side and providing locking arrangement, painting the exposed surfaes with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L cutting the existing road / PCC / drain for laying of underground cable and including necessary earthwork, excavation and making good to match the surface with PCC complete all as specified and directed.

Supply install, commissioning, testing and fabrication of LT outdoor Cubical panel Board size 1.2x1.0x40mtr by CPRI approved fabricator made of 3.15 mm thick CRCA sheet front operatable double door, locking arrangement, PCC foundation 300mm above the ground level and framing with 50x50x5mm angle iron, floor mounting type, with 300 Amps aluminium bus bar, powder coated painted including cable glands, epoxy insulation, internal wiring and nuts, bolts, washers etc. complete providing suitable size of copper cable/strip as required or as per manufacturer's recommendation with following accessories complete all as specified and directed:- Note:- (a) The cost for excavation and earth work, PCC covers, sand will be measured and paid seperately under relevant items (b) The cost for glands, cutting the LT UG cable ends and connecting back with appropriate size of lugs, GI nuts, bolts, washers etc is deemed to be inclusive of quoted rate.

S&F 40 mm bore GI pipe light grade bend to shape to fix the LED lights on poles of length not less than 1.2 m with pole fixing attachements like clamps, screws, nuts, bolts etc, complete all as specified and directed

S&F street light pole mounted junction box / cut-out box / fuse box of size 250 x 200x105 or road / street lighting for 3 phase/4 core high wattage HPSV / HPMV / MH based lighting system for industrial applications suitable for cable size of 10-25 sqmm to all weather proof, anti-termite dust proof with pole mounting arrangement, with knockouts for cable entry at the bottom surface all complete as specified and directed

S&L 2.5 sqmm 3 core 1100 volt PVC insulated multistranded, unarmoured flexible copper conductors confirming to IS-694 all as specified and directed.

S&F MCB 10-32 Amps, 'C' series AC, 50 Hz 240 volts supply all complete as specified

Cutting the existing road / PCC / drain for laying of underground cable and including necessary earth work excavation and making good with PCC complete all as specified and directed

Supply and lay fly ash brick of size 200 x 100 x 80 mm locally available as cable protection in trenches complete all as specified and directed.

M&L point wiring concelaled stranded copper conductor 1.5 sqmm HRFR cable single core, 1100 volts grade in and including ERW rigid steel stove enamelled conduit 19 / 20 mm dia along with all flame proof and weather proof accessories such as multiple junction boxes, covers, elbow, bends,tees etc, and including 1.5 sqmm HRFR copper conductor (fire guard) for earth continuity and connecting up complete for one light / fan / bell point controlled by one switch complete all as specified and directed.

All as per Sl. item No. 31 above but with cables 2.5 Sqmm and 2.5 sqmm for earth continuity conductor for 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board.

M&L powder coated extruded aluminium grills and diffusers with anti smudge ring and removable core complete all as specified and directed.

M&L fire dampers in supply air duct / main branch / return air duct as and where required of required size, fusible link type as per UL-555 with having limit to switch off the AHU when dampers shut complete all as specified and directed

Supply and fixing flame proof weather proof MCB DB 6 way in cast aluminium alloy LM6 contruction CAT No MCBDB / 186 certified by CMRS Dhanabad for group IIA & IIB to IS:2148 consisting of the following complete all as specified and directed:- Incoming FLP-WP MCB 20A DP-01 No, Outgoing: FLP-WP MCB SP 6 A-4 Nos.

S&F LED street light 25 W, made up of pressure die case aluminium housing with high power LED as lighting source and lens embeded PC cover having top opening separate driver compartment with IP 66 protection and impact resistance of IK07 (Pore wired with 1.5 sqmm copper conductor cable upto connector and including 2 m long GI tubing light grade 32 mm dia bend to shape fixing on wall with suitable MS brackets complete all as specified and directed.

M & L concealed sub main wiring with 4 runs of 6 sqmm main wire along with 1 run of 6 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC conduit (medium grade) with all fittings & accessories complete all as specified and directed. NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length.

RANA ENTERPRISES

bholanath bera

ABHIMANYU MAHARANA

DS ENTERPRISES