Design, manufacturing, delivery, testing, erection, installation and commissioning of 11 KV VCB PANEL with associated works at 33KV sub-stations in IITG Campus

Supply, delivery, erection, installation, testing and commissioning of indoor type 11KV vacuum circuit breaker (VCB) with indoor switchgear panel equipped with CT, PT & protection relays of rated voltage 11KV, 1250A, short time current rating minimum 25KA for 3secs, shunt trip floor mounted, horizontal isolation, horizontal draw out with integral earthing facility, internal arc tested with degree of protection IP4X, dustproof, vermin proof totally enclosed as per detail specification attached (5IC+2BC+13OG+2BR: 20 Nos VCB) (Approved Makes-Schneider/SIEMENS/ABB)

Demolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a lead of 1 kilometre, stacking serviceable and unserviceable material separately including cutting reinforcement bars

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lif

Providing flat brick soling under foundation, floor, plinth beam including packing with coarse sand and watering etc complete as directed with bricks class designation-75 in cement mortar in proportion 1:4 including curing complete as specified and as directed.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:2:4 (1 cement : 2 coarse sand (zone-III) derived fromnatural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement: 4 coarse sand)

15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand)

Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but excluding cost of reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand(zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level-Thermo-Mechanically Treated bars of grade Fe-500D or more.

Steel work welded in built up sections/ framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work

Please Enable Macros to View BoQ information