REPAIR TO JOINERY FLOORING ROOF TREATMENT PLUMBING INCL SANITARY FITTINGS TO OTM ACCN AND MD ACCN OFFR JCOS OR AT KWC TIMARPUR UNDER AOR OF AGE BR II OF GE NORTH DELHI CANTT 10

Amount

M&L for preparation of old decorated plastered or unplastered surfaces of wall and applying one coat of oil bound distemper including preparation of old surfaces by brooming down or steel wire brushing, scrapping down smoke soot , moulds, moss, effloresence salts, trading oil and greasy spots and filling gaps with putty and making surface smooth complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of wall and applying two coats of oil bound distemper including preparation of old surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efforescent salts and trading oil and greasy spots, filling gaps with wall care putty and making surface smooth complete all as specified and directed.

M&L for complete removal of existing treatment and preparing old decorated surfaces of wall and applying two coats of oil bound distemper over a coat of 2mm thick wall care putty complete all as specified and directed.

M&L for preparation of old decorated previously treated surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efforescent salts and trading oil and greasy spots, complete and applying one coat of white wash complete all as specified and directed.

M&L for one coat of synthetic enamel paint on old steel painted surfaces including preparation of surfaces of any description not otherwise described over 10cm width or girth complete all as specified and directed.

M&L for one coat of synthetic enamel paint on old wooden painted surfaces including preparation of surfaces of any description not otherwise described over 10cm width or girth complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of wall and applying one or more coat of plastic emulsion paint including preparation of old surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efforescent salts and trading oil and greasy spots, complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast articles, complete all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

Taking down existing cement plaster or complete removal of existing pointing and finishes including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15mm thick ready mix plaster on brick or concrete surface in cement mortar on external wall surfaces finished even and fair without using extra cement.complete all as specified and directed.

M&L for rendering 15mm thick ready mix plaster in cement mortar on brick work or concrete surfaces on Internal wall surfaces finished even and fair without using extra cement complete all as specified and directed.

M&L for rendering 5mm thick ready mix plaster on ceiling concrete surfaces in cement mortar finished even and fair without using extra cement complete all as specified and directed.

M&L preparation of newly plastered surface on walls over a coat of primer and applying two coats of oil bound distemper over a coat of 2mm thick wall care putty complete all as specified and directed.

M&L for preparing newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of any description and applying two coats of cement base paint all as specified and directed.

M&L for preparing newly plastered surfaces of ceilling and applying three coats of white wash complete all as specified and directed.

S&F in repairs drapery curtain rods Mild steel powder coated polished 25mm dia including brackets , side stop complete all as specified and directed.

S&F 3mm thick ordinary sheet glass and glazing with oil putty complete in squares not exc 0.50 Sqm each pane including hacking out complete all as specified and as directed.

S&F in repairs 500 ltrs capacity three layer rotational molded polyethylene water storage tanks, colour white (cylindrical vertical with closed top) hoisted of and fixed in position incuding provn of inlet, out let and over flow connection with tank connection nipple of existing pipe dia including, dismantling existing water tanks etc all as specified and directed.

All as per the description of srl item No 21 but 1000 ltrs capacity of tanks

M&L for non skid ceramic tiles colored tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,in floor etc set and jointed in neat cement slurry and pointed in colour cement laid over and including 15mm thick cement mortar screed bed in CM 1:6 including dismantling floor, hearth or wall tiling incluidng cement mortar beding and also backing, removing serviceable tiles, to store and rubbish off the premises complete all as specified and directed.

M&L for non skid ceramic tiles colored tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in dado/skirting over 10mm thick plaster in CM 1:4 including dismantling floor, hearth or wall tiling incluidng cement mortar beding and also backing, removing serviceable tiles, to store and rubbish off the premises complete all as specified and directed.

M&L for non skid ceramic coloured tiles (Designer type) 7 to 8mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floor etc set and jointed in neat cement slurry and pointed in colour cement laid over and including 15mm thick cement mortar screed bed in CM 1:6 including dismantling floor, hearth or wall tiling incluidng cement mortar beding and also backing, removing serviceable tiles, to store and rubbish off the premises complete all as specified and directed.

M&L for Vitrified ceramic tiles (Designer type) 10mm thick square/rectangular light shade texture polished, area of each tiles Not exceeding 0.36 sqm, as in floor etc set and jointed with neat cement slurry and pointed with white cement mixed with pigment to match the colour of the tile including 15mm thick cement mortar screed bed in CM 1:6 including dismantling floor, hearth or wall tiling incluidng cement mortar beding and also backing, removing serviceable tiles, to store and rubbish off the premises complete all as specified and directed. complete all as specified and directed.

M&L for Vitrified ceramic tiles (Designer type) 10mm thick square/rectangular light shade texture polished, area of each tiles not exceeding 0.36 sqm, as in dado/skirting over 10mm thick plaster in CM 1:4 including dismantling floor, hearth or wall tiling incluidng cement mortar beding and also backing, removing serviceable tiles, to store and rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic designer coloured tiles size 450mm x 300mm x 7mm thick as in walls etc set and jointed in neat cement slurry and pointed in colour cement laid over 10mm thick rendering in CM 1:4 including dismantling floor, hearth or wall tiling incluidng cement mortar beding and also backing, removing serviceable tiles, to store and rubbish off the premises complete all as specified and directed.

M&L 20 to 25mm thick pre-polished machine cut Kota stone slab as in flooring over and including 15mm thick screed bed in cement mortar 1:6, laid over cement slurry @ 3 Kg/Sqm and jointed with grey cement slurry mixed with pigment to match with shade of slab including moulding the edge of slab including grinding and polishing complete all as specified and directed. Note:- The size of Kota stone slab shall not less than 550mm x 550mm cut size in flooring and full length single piece in steps, except the location where the balance portion remain less than size as specified above.

M&L 20 to 25mm thick pre-polished machine cut Kota stone slab as in riser or vertical surface over and including 10mm thick rendering in cement mortar 1:4, and jointed with grey cement slurry mixed with pigment to match with shade of slab including moulding the edge including grinding and polishing where as specified and directed. Note:- The size of Kota stone slab shall not less than 550mm x 550mm cut size as in flooring and full length single piece in steps, except the location where the balance portion remain less than size as specified above.

Demolition of reinforced cement concrete (Reinforcement cut as required to facilatate demolition) of any description and in any position not otherwise specially provided

M&L for reinforced cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate in chajjas, slabs complete all as specified and directed. Note:- The reinforcement to be measured separately.

Mild steel TMT bars 6 to 8mm dia as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete.

Formwork to sides and soffits of slabs n. exc. 200mm thick and similar works rough finished surfaces of concrete complete all as specified and directed.

Demolition of stone slabe or tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar comlete all as specified and directed

M/L 18- 20mm thick granite (of any type) work (table rubbed and polished) as in pillars, steps and like in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and incluidng 15mm thick plaster complete all as specified and directed.

M&L 15mm bore GI tubing medium grade with all fittings and fixed, and removal from site 15mm bore pipe and complete to walls, ceiling or laid in floor including taking up or down steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

M&L 20mm bore GI tubing medium grade with all fittings and fixed, 20mm bore pipe and complete to walls, ceiling or laid in floor including taking up or down steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

M&L 25mm bore GI tubing medium grade with all fittings and fixed, 25mm bore pipe and complete to walls, ceiling or laid in floor including taking up or down steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Supply and laying of CPVC pipes SDR 11 of outer dia 20mm & plain CPVC SDR 11 fittings on walls/ceilings or laying in floors including taking up or down steel water tubing and connections and removal from site 15mm/20mm bore pipe and complete to walls, ceiling or laid in floor complete all as specified and directed.

M&L for cutting chases, pinning in brick walls making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing etc., and making good, cutting not exc 10cm girth complete all as specified and directed.

S&F in repairs vitreous china wash hand basin white flat back of size 550mm x 400mm including cutting for and pinning in ends of brackets, PVC flexible waste pipe 32mm dia, brass chromium plated waste fittings, PVC connecting pipe and CP pillar tap etc complete all as directed and spcified.

Supply only waste fittings brass chromium plated 32mm dia for wash hand basin complete all as specified and directed.

S&F in repairs 15mm bore PVC connection pipe of 450mm size with 2 Nos brass check nuts with washers complete all as specified.

S&F vitreous china squatting pan water closet, orissa pattern, size 580 x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including PVS (SWR) 'S' trap, provn of lime concrete and jointing to flush pipe complete all as specified and directed.

S&F in repairs PVC low level flushing cistern 10 ltrs capacity incl PVC float valves, PVC connection and out let pipes complete complete all as sepecified and directed

S&F in repairs bib tap cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe of size 15mm bore chromium plated all as specified

S&F in repairs CP brass pillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered hot or cold with long screwed sank and flynuts screwed for iron pipe of 15 mm bore complete all as specified and directed.

S&F in repairs centre hole CP basin mixer cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, mixing 'Hot' or 'Cold' water with long screwed shanks and fly nuts, screwed for iron pipe and fixed of bore dia 15mm.

S&F in repairs Vitreous china wash down water closet pan (pedestal pattern), white including fixing bolts, flushing cistern and flush pipe connection to trap and to flushing pipe complete all as specified and directed.

S&F in repairs EWC Seat cover of PVC complete all as specified and directed.

S&F in repairs shower rose fancy type bass chromium plated 125 mm heavy duty pattern with swivel joints type screwed for 15mm bore including jointing to pipe or unions complete all as specifed and directed.

S&F in repair stop valve/angle valve, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore fancy type, chromium plated complete all as specified.

S&F in repairs 15mm wall mixer , cast copper alloy , with capstan heads, chromium plated, screwed down high pressure , with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.

S&F in repairs 15mm Sink mixer , cast copper alloy , with capstan heads, chromium plated, screwed down high pressure , with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.

S&F in repair CP hand spray (health facucet with 1.0m long easy flex tube in chrome finish and wall hook) complete all as specified and directed.

S&F in repair 2 in 1 angle valve 15mm CP fancy pattern type cast copper alloy screwed for iron pipe or forbrass ferrule and fixed all as specified and as directed.

S&F in repairs CP stainless seel connection pipe 600mm long pemimum qualilty for Gyser, urinal WHB etc complete

S&F 100mm chromium plated grating round shape fixed over floor trap with coloured cement all as directed

M&L for PVC (SWR) floor trap of dia 75mm plain with grating including jointing with solvent cement complete all as specified.

S&F in repairs Soap dish disc (oval) type, mild steel chromium plated of any size complete all as specified.

S&F in repairs 32mm dia PVC waste pipe for WHB with union complete all as specified and directed.

S&F PVC(SWR) pipes, 75mm external dia double socketed in any length with rubber joints, fixed to walls etc with MS clamps including dismantling of cast iron, AC / PVC pipes including all fittings and accessories of 100/75 mm dia and in any position complete all as specified. Note:- The work will be executed at highrise bldgs and necessary T&P, scaffolding is deemed to be included in quoted rate against this item.

S&F PVC (SWR) bends suitable for 75 mm external dia with or without access door complete all as specified

S&F PVC (SWR) pipes, 110mm external dia, type-B, ISI marked (IS:13592) double socketed in any length with rubber ring joints, fixed to walls etc with ms clampsMS clamps including dismantling of cast iron, AC / PVC pipes including all fittings and accessories of 100/75mm dia and in any position complete all as specified. Note:- The work will be executed at highrise bldgs and necessary T&P, scaffolding is deemed to be included in quoted rate against this item.

S&F PVC (SWR) bends suitable for 110mm external dia with or without access door complete all as specified

Taking down chowkhats or frames with shutters n.exc 1.5 sqm each(without taking off shutters from the frame) and all as directed.

All as per the description of srl item No 68 above but exc 1.5 sqm but n.exc 4sqm each complete as specified.

Taking down shutters exc 1sqm but not exc 2 sqm each and all as directed.

S&F aluminium powder coated three track window ( two shutters glazed & one shutters wire gauge) with frame, glazed with 4mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm including rubber beading joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specified below :-- (a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50mm ( Section No 21447) (b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50mm ( Section No 21446) (c) Top & side Members of shutter Section shall be be of size 18.00 x 40.00 x 1.50 (Section No 21455) (d) Interlock Section of Shutter shall be be of size 18.00 x 40.00 x 1.50 (Section No 21454) (e) Bottom Members of shutter Section shall be be of size 18.00 x 40.00 x 1.50 (Section No 20844) Note:-(i) Section Number given above are of make Jindal, Contractor may use similar section of other make mention in Appx .

M&L for powder coated aluminium grill in repairs of powder coating of minimum 50 micron with aluminium mesh of sze 50mm x 50mm with square tube solid 6mm thick including aluminium channel of size thickness of channel 1.5mm complete all as specified and directed.

S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

M&L for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified.

S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handles, and steel peg stay, complete with glazing bars, dovetailed or welded all as specified and directed.

S&F 4mm thick ordinary sheet glass and glazing with oil putty complete in squares not exc 0.50 Sqm each pane complete all as specified and as directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete drilled for fixing of steel sheeting in or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete, confirming; Fe 410-W. all as specified and directed

S&F 35mm thick, second class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc with rails and styles including cut and mitered beards for securing wire cloth etc,all as specified and directed.

S&F 30mm flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed.

S&F factory made solid panel PVC door shuter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails & MS frame shall be covered with heat moulded plain colour PVC `C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement of stiles and plain colour PVC sheets for top rail,lock rail & bottom rail, on either side & as gap insert for top rail & bottom rail & panelling of plain colour PVC sheet to be fitted in the MS frame welded/Sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per complete all as specified.

S&F solid door frame 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete.all as specified and directed.

S&F 100mm medium weight cold rolled mild steel butt hinges complete all as specified.

S&F aluminium anodised barrel tower bolt 200mm long extruded section all as specified.

S&F 250mm long aluminium alloy anodised sliding bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts and extruded section or cast aluminium alloy and fixed complete all as directed and specified.

S&F 150mm size extruded aluminium handles fabricated type anodised complete all as specified.

S&F stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks/stainless steel wire staples all as specified.

S&F in repair stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks/stainless steel wire staples all as specified.

M&L preparation of new wooden surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of primer complete all as directed and specified.

M&L for preparation of new steel surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

S&F in repairs 18/19mm thick prelaminated particle board, interior grade prelaminated one side with decorative choice lamination and otherside balancing white as in shelf for cup board complete all as specified and directed.

S&F stainleless steel handle 75mm fancy type for cub board shutter complete all as specified and directed.

S&F mild steel magnetic catches and striking plate of 50mm size for kitchen cup board or wardrobe fixed with screw including letting in and fixed complete all as specified and directed .

S&F continuous piano hinges mild steel hinges bright electro galvanised width of tops 40mm (when opened) complete all as specified and directed.

Cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in CM 1:3 or cement concrete 1:2:4 type B-I as required, exc half brick but not exc one brick wall complete all as directed and specified.

M&L welding in repairs n. exc 6mm thick metal and n. exc 2.5 cm in length all as specified and directed..

Removing of existing water proofing membrane, damage plaster, vegitation/plants, PCC, Tar-felt, loose particles and all forgin materials over the roof and shifting the debris from site to out-side area as directed by authority on factory garbage area. Cleaning the surface & removing of dust, existing paints from wall & roof surface, finding visible crack Making V - Groove by machine on crack area, providing & applying Polymer Bonding agent (1:2) & filling those grooves by modified cement & sand mortar (1:4) with WPM liquid (5% by wt. of cement complete all as directed and specified.

M&L for 15mm thick cement plaster over the concrete / brick roof surfaces in cement mortar 1:4 mixed with liquid water proofing compound @ 200ml per bag WPC (liquid type), surface finished even and smooth without using extra cement all as specified and directed. Note :- Water proofing additive shall be measured and paid separately.

Cleaning all the dust and loose material by brush/blower/Grinder including removing of vegetation/plantation from the surface and M&L for preparation of roof top surfaces, providing and applying single component elastic cold applied polyurethane modified acrylic roofing system, co elastic technology (CET) based on modified polyurethane and fully fibre reinforced, having Sun Reflectivity index (SR) of 109 on top of concrete roof surfaces. All cracks up to 3 mm at corner joints, channel and parapets should be treated with crack seal. Applying three coats including one coat of primer of ShaliUrethane BTD/ Sikalastic 560/ smart care damp proof-ultra having coverage @ min 0.75kg/m2 and dilution up to 10% and laying reinforced fiber net and applying two coats (without dilution) of shaliUrethane BTD/Sikalastic 560/smart care damp proof ultra @ total consumption 2 kg/m2 in two coats for maintaining minimum dry film thickness 1.5mm and elongation at break of free film of approx 350%. The materials shall be applied with brush or roller, complete in all respect as per the direction of Engineer-in-charge/Consultant (Note :6 Hrs interval between two coat will be maintained). All auxiliary and accessories involved during application should be supplied by single manufacturer as a part of system. Make: STP/Sika/Asian paint or equivalent as approved by GE. Note:- Application of water proofing treatment will be done by Authorised Applicator only.

M&L for PCC 1:2:4 type B-0 (12.5mm graded crushed stone aggregate) cement concrete in roof padding, roof kerbs of mud stops, rounded or chamfered on edges complete all as spcified and directed.

Supply only liquid water proofing compound complete all as spcified and directed.

Disconnecting existing tanks, exc 500 & n.exc 1000 ltrs setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in position all as specfied and directed.

Dismantaling plain or corrugated AC sheeting any gauge, thickness, including nainital or similar pattern roof covering all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550MPa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

All as per the description of srl item No 105 above but except sheets.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550MPa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling timber scantling in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section unframed work complete all as specified and directed

Dismantling of timber scantlings, of framed work, from any position & height 40 Sq.cm and over in section complete all as specified and directed.

S&F steel work in tubular trusses/purlin of any size or shape including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 including nut, bolt, MS plate complete all as specified and directed.

Taking down rolling shutters of any description and size including top cover, cleaning the helical wire spring, anchoring rod, guide channels etc and greasing /oiling to all moving parts of rolling shutter including straighting the anchoring rod, braket plate for smooth functioning, replacement of damaged/worn out lath 1.25 mm thick and re-fixing the rolling shutter with top cover and making good the disturbed portion etc. complete all as directed and specified. Note 1 :- The unit quoted rate deemed to be included for minor repairs , welding and replacements of nut & bolts if required. Note 2 :- Material Like helical wire spring, anchoring rod, gear box, etc shall be measured and paid in following item given below.

Supply only mild steel helical wire spring 45cm long, 75mm dia and weighing of each spring not to be less than 2.40 kg, complete all as per specified and directed.

Supply only mild steel tube medium grade of 40mm dia for anchoring rod to rolling shutter including necessary weding to mild steel bracket plate, drilling holes for fixing spring complete all as per specified and directed.

Supply only mild steel lock plate and handle made out of mild steel flat iron, including necessary welding complete all as per specified and directed.

Supply only mild steel ,laths 1.25mm thick in any type of sliding shutters and in any length including all necessary work for satisfactry functioning of sliding shutter complete all as specified and directed.

Supply only guide channel, rails, angle etc for smooth functioning of rolling shutter including necessary welding to M.S. bracket plate, drilling holes for fixing complete all as directed and specified.

S&F in repairs for gypsum ceiling board for ceiling prepainted, perforated finish, 600 x 600 x 9 to 9.5mm thick in size, of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32 x 24mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2mm thick G.I. Suspension wires spaced at 1200 mm on main runners including making niches for fans/light, including dismantling of wall ceiling and boards, (fibere pulp, insulation etc or insulation boards of any thickness including cover fitllets. all as specified and directed.

V M CONSTRUCTION

DEEP ASSOCIATES

The new hut furnitures

V.V CONSTRUCTIONS

S GOURAV PRAKASH ENTERPRISES