(A) Shifting of lighting towers, fixing of lighting arrestor, replacement of damaged GOAB Switch (B) Treatment of 46 Nos. earthpits (C) earth fault, power leakage from OHL, bush cutting, trimming of branches of trees, surface dressing Dakra OCP,

Amount

Erection of all aluminium conductor of 7/3.40 mm to 7/4.00 mm diameter and above including binding etc. as required

Erection of angle iron/ channel iron cross arm on wood/ RCC/ PCC/ steel tubular/ rail pole etc. as required

Dismanting of fabricated lighting tower

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc as required. Above 16.00 Metre and upto 20.00 Metre (Fabricated Tower).

Dismantling of fixed type lighting tower with control panel and other fittings

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 Sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m.

Providing and laying in position cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) in foundation etc including form work etc as required.

Steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding in all complete with mild steel and medium tensile steel bars

Providing and fixing of foundation bolt, G.I 15mm x 24 mm

Cutting of MS plate for base flange making with making of holes etc.

Erection of fix type lighting tower with control panel and other fitting

Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 mtrs long etc etc. with charcoal/coke and salt as required. (For High Mast Tower)

Fixing of Flood light on Tower with connection etc as required.

Provision of following materials for fixing of Lighting Arrestor. Copper Arrestor: Thickness of rod 16mm, Height of rod 30 Inch, Top finger of Ball 50 mm dia x 4 inch long

Earthing with G.I. earth pipe 4.5 Metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc with charcoal / coke and salt as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required

GOAB Switch 11kV/800 Amp (Including fixing charge)

Excavation work by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 Sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m.

Brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in foundation and plinth in cement mortar 1:4 (1 Cement: 4 coarse sand). For 46 Nos. earth pit.

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required for 46 nos. Earth pit.

Earth pit treatment and repairing with charcoal, salt, GI nut bolt for 46 Nos. earth pit.

Cleaning jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. Two times.

Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m: All kinds of soil.

Total impact of GST for the purpose of CTC

M/S KUMAR ENTERPRISES (BID ID -1156046)