COMPREHENSIVE MAINTENANCE (VIP VISIT/ CGP RELATED WORKS) AND WELCOME MAINTENANCE TO CERTAIN MD OFFICERS ACCN AND ALLIED WORK IN OMQ AREA, OFFICERS MESS AND OTHER BUILDINGS OF DOMESTIC AREA AT AFA HYDERABAD

Amount

M&L for preparing old decorated or unplastered surfaces on walls including cornices and applying one coat of white wash all as specified and directed by Engineer-in-Charge.

M & L for preparing old plastered or unplastered surfaces on ceilings including cornices and applying one coat of white wash all as specified and directed by Engineer-in-Charge.

M & L for preparing old plastered or unplastered surfaces of walls including cornices and applying one coat of distemper oil emulsion all as specified and directed by Engineer-in-Charge.

M & L for preparing old plastered or unplastered surfaces on ceilings and applying one coat of distemper oil emulsion all as specified and directed by Engineer-in-Charge.

All as per Item No 3 above but two coats of oil bound distemper on walls all as specified and directed by Engineer-in-Charge.

M&L for complete removal of existing treatment of any description and applying 3 mm thick wall care putty and rubbing with sand paper to achieve a level and smooth to wall and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed.

M & L for preparing old plastered or unplastered surfaces on walls/ceiling including cornices and applying one coat of cement based paint all as specified and directed by Engineer-in-Charge.

M & L for preparing old painted wood and wood based surfaces of any description, exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

M & L for preparing old painted steel and iron surfaces of any description, exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

M&L for preparing old chequered / interlocking path surfaces and applying one coat of Weather Coat Floor Protector/ apex floor guard is a pure acrylic water based emulsion for exterior or equivalent, all as specified and directed by Engineer-in-Charge.

M & L Preparation of old painted surfaces on concrete surfaces plain or moulded, of any description not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint (ordinary tint ) etc, complete all as specified and directed.

Taking down plaster in wall/ceilling surfaces on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr -in- charge.

Demolition of Brickwork or stone / boulder / PCC block masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stone-work and precast concrete articles etc complete all as specified and as directed.

M&L for pre-cast cement concrete block masonry of type C1 1:3:6 (using 20mm graded stone aggregate) with solid blocks exc 10cm in width and setting in cement mortar 1:4 etc complete all as specified and as directed.

M&L for plastering in internal wall surfaces of 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and directed by Engr -in- charge.

M&L for plastering in external wall surfaces of 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and directed by Engr -in- charge.

M&L for rendering 10 mm thick in CM 1:4 on concrete surfaces as ceilling finished even and smooth (without using extra cement) complete all as specified and directed by Engr -in- charge.

M & L for two coats of oil bound distemper on newly plastered surface of walls over a coat of alkali resistant primer including preparation of surfaces complete all as specified and directed by Engr -in- charge.

M&L for preparation of newly plastered surfaces of external walls and applying two coats cement base paint over a coat of cement primer complete all as specified and directed by the Engineer-in-Charge.

M&L for preparation of newly plastered surfaces of ceiling and applying two coats white wash etc. complete all as specified and directed by the Engineer-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frame, glazed with putty complete all as specified and as directed.

S&F sheet glass 3 mm thick, ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed.

S&F frosted or ground/obscured type sheet glass, 3mm thick and glazing with oil putty in squares n.exc 0.5 Sqm in each pane complete all as specified and as directed

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified.

S&F in repairs 25mm thick curtain rod aluminium powder coated (any colour) fancy type complete all as specified and as directed

S&F in repairs fancy type brackets with knobs suitable for 25mm dia curtain rod aluminium powder coated (any colour) including stay & side clamp as reqd at site complete all as specified and as directed

S&F in repairs Door seal (Snake guard) with Aluminium frame complete all specified

Dismantling floor, heath or wall tiling including cement sand mortar bedding and removing rubbish of the premises complete all as specified and directed by Engr -in- charge.

S&F of Non-skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc including Screed bed or bedding in layer of mortar 15 mm thick for laying floor finishes in cement plaster 1:4, complete all as specified and directed by Engr -in- charge .complete all as specified and as directed.

M&L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including screed bed or bedding in layer of mortar 15 mm thick for laying floor finishes in cement plaster 1:4, complete all as specified and directed by Engr -in- charge. complete all as specified and directed by Engr -in- charge.

M&L for glazed ceramic tiles coloured of size 350 x 250 x 7 mm / 450 X 350 X 7 mm thick as on walls over jointing in neat cement slurry and pointing in coloured cement to match the inside of tiles including 10mm thick rendering in cement mortar (1:4) complete all as specified and directed by Engr -in- charge.

Dismantling of stone slabs and tiles of any description or thickness as on platform, shelves, floors etc laid, bedded and pointed in any mortar .

M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like over 20 mm thick screed bed or bedding layer in cement mortar (1:6), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

Taking up or down 15mm bore of pipe PVC/steel tubing and connections, including for refixing or removal etc complete all as specified and directed.

Taking up or down 20mm bore of pipe PVC/steel tubing and connections, including for refixing or removal etc complete all as specified and directed.

S&F of 15 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

S&F of 20 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

S&F in repairs of High density polyethylene pipes (HDPE) 40mm dia of pressure rating 6kg/cm2 fixed complete to walls or laid in floors complete all as specified and directed by Engr -in- charge.

S&F in repairs of Vitreous china squattig pan, Orissa pattern of size 580 x 440mm,white with integral foot rest including trap set and connection to trap and to flushing pipe, anti-syphonage pipe, and with P or S trap, including making good to floor complete all as specified and directed by Engr -in- charge.

S&F in repairs of Vitreous China wash down water closet pan (Pedestal pattern), white including connection to drain and to flushing pipe, and plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device etc complete all as specified and as directed.

S&F in repairs of Vitreous china wash basin, white flat back, size 550 x 400 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets etc complete all as specified and directed by Engr -in- charge.

Supply only of Waste coupling of 32 mm chromium plated for glazed ware basins with long screwed shanks and fly-nuts etc complete all as specified and directed by Engr -in- charge.

S&F in repairs of CP Bib fancy type taps 15mm bore cast copper alloy with capstan head fancy type screwed down screwed for iron pipe or for brass ferrule etc complete all as specified and directed by Engr -in- charge.

S&F in repairs of Angle cock of 15 mm dia cast copper alloy with capstan head fancy type chromium plated etc complete all as specified and directed by Engr -in- charge.

S&F in repairs of concealed stop valves 15 mm dia casr copper alloy fancy type chromium plated with long shank and cup screwed down, high pressure screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed by Engr -in- charge.

S&F in repairs of stop valves 15 mm dia cast copper alloy fancy type CP and capstan head screwed down high pressure screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed by Engr -in- charge.

S&F in repairs of Gun metal globe or gate valves/ Non returning Valve of 20mm dia with iron wheel head screwed both ends for iron pipe etc complete all as specified and directed by Engr -in- charge.

S&F in repairs of Gun metal globe or gate valves/Non returning Valve of 25mm dia with iron wheel head screwed both ends for iron pipe etc complete all as specified and directed by Engr -in- charge.

S&F in repairs of Ball valve 20mm dia high pressure PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (Minimum wt. 210gms) etc complete all as specified and directed by Engr -in- charge.

S&F in repairs of Ball valve 25mm dia high pressure PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum wt. 455gms) etc complete all as specified and directed by Engr -in- charge.

S&F in repairs of ABS chromium plated shower rose LONG ARM with or without swivel joint any size including fixing to steel pipe or union, of size 125mm in repairs complete all as specified and directed by Engr -in- charge.

S&F in repairs of PVC valve less, syphonic action type, flushing cistern, low level, 10 ltr capacity, white, with inlet, ball valve, float and handle including brackets and long flush band etc complete all as specified and directed by Engr -in- charge.

S&F in repairs of PVC connection 15mm size with brass CP nuts of length 600 mm complete all as specified and directed by Engr -in- charge.

S & F in repairs of Rotational moulded PVC water storage tanks of 500 ltrs capacity (cylindrical vertical with closed top) , two layered, hoisted and fixed in position all as specified in SSR part – I including dismantling of OHT of capacity 500 ltrs complete all as specified and directed by Engr -in- charge.

S & F in repairs of Rotational moulded PVC water storage tanks of 1000 ltrs capacity (cylindrical vertical with closed top) , two layered, hoisted and fixed in position all as specified in SSR part – I including dismantling of OHT of capacity 1000 ltrs complete all as specified and directed by Engr -in- charge.

S&F in repairs of Pillar taps 15 mm dia, cast copper alloy, Long nose , chromium plated fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and capstan head, screwed for iron pipe of 15 mm bore etc complete all as specified and as directed.

S&F in repairs of Lids for Rotational moulded PVC water storage tank of 250 to 2000 ltrs capacity fixed in position all as specified in SSR part – I. complete all as specified and directed by Engr -in- charge.

S&F in repairs of Brass CP wall mixer 'hot' & cold water scrwed down for iron pipe etc complete all as specified and directed by Engr -in- charge. Make: Jaquar or equivalent make as approved by GE.

S&F in repair of centre hole basin mixture 15 mm bore dia with fancy type heads chromium plated screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and capstan head, screwed for iron pipe and fixed complete all as specified and directed by Engr -in- charge. Cat Part No COT-23169B Make of Jaquar or equivalent make as approved by GE.

S&F in repairs of PVC waste pipe 32 mm bore, 900 mm long etc complete all as specified and directed by Engr -in- charge.

S&F in repairs of towel ring 150 mm dia type ABS body chromium plated fixed with and including Chromium plated brass screws complete all as specified and directed by Engr -in- charge.

S&F in repairs of brass chromium plated towel rail 600mm long "D" type fixed with suitable steel screw etc complete all as specified and directed by Engr -in- charge.

S&F in repairs Soap dish, stainless steel and fixed to wall complete all as specified and directed by Engr -in- charge.

S&F in repairs toilet paper holder ABS body chromium plated box type complete all as specified and directed by Engr -in- charge.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed by Engr -in- charge.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm etc complete all as specified and directed by Engr -in- charge.

S&F in repairs of Vitreous China Pedestal type EWC with attached flushing cistern, white including connection to drain and to flushing pipe, and plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device etc complete all as specified and directed by Engr -in- charge. Make : Cat Part No S1021116,S1060113,B1810107 candid full set of CERA or equivalent make approved by GE.

S&Fin repairs of CP Bib taps two way in one 15 mm cast copper alloy fancy type with capstan head screwed down screwed for iron pipe or for brass ferrule etc complete all as specified and directed by Engr -in- charge.(Make ; Jaguar or equivalent)

S&F in repairs of ABS body CP health faucet complete set including holder stand and one metre PVC pipe, 15 mm cast copper alloy screwed down screwed for iron pipe or for brass ferrule etc complete all as specified and directed by Engr -in- charge. Make : CERA Cat Part No 8030101.

S&F in repairs glass corner/ mirror shelves size 300/450 mm of each fixed with necessary screws, bolts , and supporting L type angles with drilling in walls complete all as specified and directed by Engr -in- charge.

S&F in repairs PVC Cabinet of size 600mm x450mm with necessary fittings and hinges complete all as specified and directed by Engr -in- charge.

M&L Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc exc 500 and n exc 1000 capacity in litres and write date of cleaning and due date of cleaning on OHT complete all as specified and directed by Engr -in- charge.

S&F in repairs of stainless steel grating 100 mm dia with/without hole complete all as specified and directed by Engr -in- charge.

Deepika Enterprises (BID ID -3095818)

GUTHIKONDA BROTHERS (BID ID -3102550)

M/S NAVEEN BUILDERS (BID ID -3114311)

S J REDDY (BID ID -3101334)