Karnataka

Active

Works

Roads

Improvements Of Road from Hattarakihal to Managuli Islamapura Thanda in BasavanBagewadi Tq of Vijaypur dist (2025-26 CMIDP GRANT)

Rural Development and Panchayat Raj Department

RDPR Division Office Vijayapura | VIJAYAPUR, Karnataka

Amount: ₹1.5 CrCloses: 16 Jun 2026

Tender Value

₹1.5 Cr

EMD Value

₹2.3 L

Closing Date

16 Jun 2026, 11:00 pm

Tender Inviting Organisation

Name

Rural Development and Panchayat Raj Department

Work Description

Improvements Of Road from Hattarakihal to Managuli Islamapura Thanda in BasavanBagewadi Tq of Vijaypur dist (2025-26 CMIDP GRANT)

Tender Information

Tender ID

300834

Reference Number

RDPR/2026-27/RD/WORK_INDENT26688

Tender Type

Open

Product Category

Roads

Location

RDPR Division Office Vijayapura

Source Website

Subscribe to view

Documents Required

7 documents required · 7 mandatory

Technical Bid

RequiredThe Tenderer should possess valid Registration Certificate. KPWD/CPWD Class-1 License

RequiredLast Five Years Turnover Certificate along with Balance Sheet and Profit and Loss Account Statement UDIN Details are mandatory

RequiredValid Work Done Certificate issued by not below the rank of Executive Engineer

RequiredValid Work Done Certificate having Quantities executed issued by not below the rank of Executive Engineer

RequiredLine of Credit/Bankers Certificate in the prescribed format

RequiredList of ongoing works with balance amount to be executed.

RequiredAccurate postal address and Phone / cell Number

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

As per Karnataka State Government order No.LD 300 LET 2006 Bangalore Dated 01/01/2007 and Government Letter No.PW 134 BMS 2007 Dated 27/7/2007 a sum amounting to 1 percent of the bill amount will be deducted towards Construction Labour Welfare fund.

The tenderer should quote his rates with all lead and lifts, loading and unloading including cost of labour, hire charges of machinaries and other incidental charges etc complete as per specification and directions of the Engineer incharge of the work.

The bidder shall bear all costs associated with the preparation and submission of each tender and the employer will in no case be responsible and liable for those costs. The department is not responsible for any delay in accessing e-procurement portal

Contractors should have to upload the scanned copy of all necessary qualification documents, and submit the original documents certificates after opening the tender for evalution and verification.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders The departments shall not be responsible for non accessibility of KPPP portal due to internet connectivity issues and technical glitches at bidders end.

All materials required for the work shall be procured by the tenderer himself and should be got tested by the quality control authorities at his own cost before use on work.

Within 20 days of receipt of Letter of Acceptance, the successful Tenderer shall deliver to the employer a Security Deposit in the form of NSC/DD/ FDR in favor of the Executive Engineer, P.R.E. Division, VIJAYAPUR, for an amount equivalent to 5 percent of the Contract price plus additional security for unbalanced tenders in accordance with the conditions of contract.

Successful Bidder shall pay Contract Management Module processing fees of 0.025 percent of the contact value (Min Rs.500/- and Max Rs.7500/-) when bills are raised using Contract Management Module.

Self declaration of machineries are not accepted.

Third party inspection is mandatory for all the works in this programme.

The Employer reserves the right to reject any or all tenders without assigning reason.

Tenderer must submit his present accurate postal address and phone / cell phone number.

For interpretations of clauses, conditions, spelling mistakes, etc., decision of Executive Engineer is final.

The Furnished E.M.D. will be released only after successful execution of the Tender Agreement by the successful Tenderer or bid validity days from the date of submission of Tender whichever is earlier.

The successful tenderer shall maintain the work during the defect liability period of 1 year from the date of completion of the work.

The Tenderer at his own responsibility and risk is encouraged to visit and examine the Site of Works and its surroundings and obtain all information that may be necessary for preparing the Tender and entering into a contract for construction of the Works. The cost of visiting the Site shall be at the Tenderers own expense.

All other conditions and requirements has to be fulfilled as per the KW Standard Bid Document.

It is to be noted that any false documentation found to be uploaded, action may attract punitive measures such as Blacklisting, Cancellation of Registration etc.

The GST will be paid separately to the Contractors as per the Guidelines of the Government.

The work shall be inspected by the Third Party and the bill shall be admitted only after the satisfactory quality reports from the Third Party.

All safety precautions, warnings, signs, deployment of security guards have to be ensured so that no untoward incident happens on account of negligence or any project activity.

All materials required for the work, shall be procured by the tenderer himself and should be got tested by the Department quality control authorities at his own cost before use for the work. If employer wishes to engage third party inspecting agency for the said work, apart from the quality control authorities, then the contractor should cooperate with the third party for test

In the case of death of the contractor after executing the agreement/ commencement of the work, his legal heir, if is an eligible registered contractor and is willing, can execute and complete the work at the accepted tender rates in the same terms and conditions of the contractor of the work

Corrigendum/Modifications/Corrections if any will be published in the KPPP website only.

The work should be executed as per the KTPP Act.

The work should be completed within the stipulated time period from the date of issue of work order including Rainy Season.

Technical Criteria

General

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Capabilities of Vendor

Achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs 301.77 Lakhs during the last five financial years (2021-22 to 2025-26). Turnover Certificate issued by CA.

Audited CA Certificate of Annual Turnover

To qualify for award of this contract, Each tenderer in his/her name should have in the last five year i.e, 2021-2022 to 2025-26 Satisfactorily completed, as a prime contractor, for at least one similar work of value not less than Rs. 75.44 Lakhs (Work Done certificate should be isuued from not below the rank of Executive Engineer with complete Indent No.)

Work Done Certificate

Liquid assets and /or availability of credit facilities of no less than Rs 50.29 Lakhs (Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc) as per the format issued by the Government Circular Dated:22.08.2022. (LOC issued by authorized Bank.)

Line of Credit

Executed in any one year for a continuous period of 12 months the minimum quantities of work. 2021-22 to 2025-26 80% of the estimated quantity required 1. Construction of Embankment and Earthen Shoulder- 10841.76 Cum 2. GSB - 773.54 Cum 3. WMM / WBM - 859.48 Cum 4. Asphalt - 5730.00 Sqm 5. RCC/PCC - 76.33 Cum 6. Pitching - 28.80 Cum

Work Done Certificate

The bidder must submit last 5 years Profit and loss account obtained from Chartered Accountant (CA) Only. Certificate issued by CA.

Audited CA Certificate of Annual Turnover

The Tenderer shall obtain the work done certificate in the prescribed form from the competent authority not below the rank of Executive Engineer (District Level Officer) and scan the Original Certificate and attach the scanned file to the Bid. The Original Certificate / Certificates shall be produced whenever required. Work Done certificate should be isuued from not below the rank of Executive Engineer with complete Indent No.

Work Done Certificate

The Tenderer should possess valid Registration Certificate. KPWD/CPWD Class-1 License

PWD Registration Certificate (Class I/II/III/IV)

Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as: Assessed available tender capacity ( AxNx1.5-B ) (List of ongoing works with balance amount to be executed.)

Others -- List of ongoing works with balance amount to be executed.

Work Locations

Fee & Financial Details

Tender Fee Amount

₹3,780

EMD Fee Amount

₹2.3 L

Important Dates

Last Activity

1 Jun 2026

Published

1 Jun 2026

Bid Opening

18 Jun 2026

Download Ends

15 Jun 2026

Pre-Bid Meeting

15 Jun 2026

BOQ Preview

•

Construction of Flexible Pavement

•

Clearing and Grubbing Road Land.Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlie...

•

Compacting Original Ground Compacting original ground supporting embankment Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankme...

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and ...

•

Surface Drains in Soil (Mechanical Means) Construction of unlined surface drains of average crosssectional area 0.40 m2 in soil to specified lines, grades, levels and dimensions. Excavated material to...

•

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreadi...

•

Construction of Subgrade and Earthen Shoulders

•

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading,...

•

Construction of Granular Sub-Base by Mix in Place Method by providing well graded Gravel, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavato...

•

Water Bound Macadam B. Mechanical means, Grading-I (63 mm to 45 mm) (a) Using Screening Crushable type such as Moorum or Gravel Providing, laying, spreading and compacting stone aggregates of specifi...

•

Water Bound Macadam B. Mechanical means, (ii) Grading-II (53 mm to 22.4 mm) (b) Using Screening Type B (11.2mm agg) Providing, laying, spreading and compacting stone aggregates of specific sizes to wa...

•

Prime Coat over WMM/WBM Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0....

•

Tack coat on Granular surface treated with primer

•

Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg/m2 on Granular Surface.

•

Open - Graded Premix Surfacing Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen VG-30 to...

•

Seal Coat - Type B Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using TypeA and B seal coats with bituminous binder VG-30...

•

Information Board Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20...

•

Cross Drain 1 Row (1 Nos)

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

•

Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specificationa. Granular Material

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

•

Providing and laying in position cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

•

Providing and Laying Reinforced Cement Concrete Pipe NP3 as per design in Single Row (1000 mm Dia)Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granu...

•

Curtain wall complete as per drawing and Technical specificationb. Cement concrete Grade M15

•

Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification.a. Boulder Laid ...

•

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specificationsa. Stone/Boul...

•

Painting Two Coats on New Concrete SurfacesPainting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces

•

Steel Fabrication h. All other type of StructuresSupplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutti...

•

Cross Drain 1 Row (1 Nos) 2

•

Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specificationa. Granular Material

•

Curtain wall complete as per drawing and Technical specificationb. Cement concrete Grade M15

•

Painting Two Coats on New Concrete SurfacesPainting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces

•

Cross Drain 2 Row (1 Nos)

•

Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specificationa. Granular Material

•

Curtain wall complete as per drawing and Technical specificationb. Cement concrete Grade M15

•

Painting Two Coats on New Concrete SurfacesPainting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces

•

Cross Drain 2 Row (2 Nos) 2

•

Dismantling of Structures

•

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P an...

•

Removing all type of Hume Pipes and Stacking including Earthwork and Dismantling of Masonry Works.

•

Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specificationa. Granular Material

•

Curtain wall complete as per drawing and Technical specificationb. Cement concrete Grade M15

•

Painting Two Coats on New Concrete SurfacesPainting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces

•

Field Cross Drain 1 Row (12 Nos)

•

Providing and Laying Reinforced Cement Concrete Pipe NP3 as per design in Single Row (750 mm Dia)

•

Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granu...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

26688 Road 180 lakhs KW 4.doc

Tender Document • 0.47 MB

Ready to Participate?

Download all tender documents and submit your bid

Improvements Of Road from Hattarakihal to Managuli Islamapura Thanda in BasavanBagewadi Tq of Vijaypur dist (2025-26 CMIDP GRANT)

Market Intelligence

Tender Inviting Organisation

Work Description

Tender Information

Documents Required

Eligibility Criteria

Technical Criteria

Work Locations

Fee & Financial Details

Important Dates

BOQ Preview

Documents

NIT Documents

Ready to Participate?