Repair replacement to peripheral boundary wall fencing concertinal coil post etc and other misc work at Sewar fort and 39 FAD Under GE Bharatpur

Amount

M&L for 15 mm thick rendering surface fair face of brick-work surface with cement mortar 1:4 finished even & fair complete all as specified and directed

Ditto as above item no 1 but on other than fair faces of brick work surface with cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed

M&L for rendering 15 mm thick in CM (1:4) on fair surface of fair & even complete all as specified and directed

Ditto as above item No 4 but in CM (1:6) on other than fair faces finished even and smooth without using extra cementcomplete all as specified and directed

M&L for rendring 10mm thick in CM (1:4) on fair faces of brick work or concrete surfaces mixed with water proofing compound as per manufacturers instruction finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. (WPC to be measured and paid for separately)

M&L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified and directed. (WPC to be measured and paid for separately)

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc, complete all as specified & directed. Note : Inner girth only measured.

All as per item No 8 but add or deduct for each 25 mm girth or part thereof over or under 30 cm, complete all as specified and directed

Supply only integral waterproofing compound complete all as specified and directed

M & L for Preparation of new plastered surface of wall including cornices, pilasters etc by brooming down and applying two coats of distemper oil emulsion white or tinted over & including a coat of alkali resistant priming paint wall primer with hand roller & 3 mm wall care putty (in Two Coats) complete all as specified and directed

M&L for Preparation of newly plastered surfaces of Wall & applying three coats of white wash complete all as specified and directed

M&L for Preparation of new plastered surfaces of walls or un plastered surface and applying two coats of cement base paint over & including a coat of alkali resistant priming paint with hand roller complete all as specified and directed

Complete removal of existing treatment on old wall surface, preparing plastered or unplastered surface, applying two coats of cement base paint complete all as specified and directed

M&L for providing cement concrete (1:2:4), type B-1 using 20mm graded stone aggregate as in lintels upto 1.50m clear span, cills steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parpets and railing upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering , slightly rounded or chamfered angles and throating including necessary form works etc complete all as specified and directed

M&L for Two coats of Apex Weather Proof Exterior emulsion (Water Based 100% Acrylic ) or approved equivalent grade paint using hand roller over & including one coat exterior grade wall primer on cement plaster,concrete ,exterior ceiling etc complete all as specified and directed Note:-Color & Pattern /Color Combination of the paint shall got approved from Engineer In Charge.

Demolition of brick masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings,dressed stone work and precast concrete articles complete all as specified and directed

M&L Demolition of of stone /boulder masonary , built in lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed

M&L Brick work with sub class 'B' old size bricks bricks straight or cured on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified and directed

Ditto Item No 19 but except bricks

M&L Walling of random rubble, brought upto course well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed

Ditto all as item no 21 above but except stone complete all as specified and directed

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 CM thickness (below or above GL) complete all as specified and as directed ..

M & L for Endura Designer Collection Series of Jhonson Tiles or ,Kajaria or somani tile of size 400x400x10 mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid over 15mm thick base of cement mortar 1:4 in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete all as specified and directed

M & L for Endura Designer Collection Series of Jhonson Tiles or ,Kajaria or somani tile of size 300x300x10 mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid over 15mm thick base of cement mortar 1:4 in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete all as specified and directed

M&L for plain cement concrete 1:4:8 type D2 (40 mm graded aggregate) as in Sub base complete all as specified and directed

Dismantling of Stone Jali & Stone Pillar of any description , any thickness all as specified & as directed

M&L for 30 mm thick Sikandra stone jali decorative design of approved pattern by Eng-in-charge including all carving and moulding of corners fixed in cement mortar 1:4 to grooves of stone pillars application with colouring to match with colour of jali including fixing of stone jali for all corners & lift complete all as specified and directed

S&F stone pillars(post) of size 100x100 mm including engraving decorative design of approved pattern on two face and dome shape approved by Eng-In-charge , height of each post as per sikandra stone jali, ,making groove on two face of size 43x5 mm for fixing of sikandra Jali in CM 1:4 complete all as specified and directed

M& L for providing PCC type B 0 (1:2:4) using 12.5mm graded aggregates in lintle upto 1.5m clear span cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in hight copings kneelers apex stones bed plates kerbs not provided for in item 04028, water troughs and the like including weathering slightly rounded or chamfered angles and throating complete ass as specified and directed.

M&L for 100 mm thick Cement concrete type D-2, using 1 : 4 : 8 (40mm graded stone aggregate) as in sub floors/sub bases etc. complete all as specified and as directed.

Supply Fine Agg (sand) for sand cushioning below the interlocking tiles as bedding layer complete all as specified and directed

M&L for Machine pressed precast concrete interlocking paver block with grey cement & no pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed

M&L dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing) , removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L for Coloured Non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, set and jointed in neat cement slurry and pointed in coloured cement over & including 15mm thick rendering in CM 1:4 complete all as specified and directed

M&L Non - skid Ceramic colored tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc over 10 mm thick screed bed in CM 1:4 in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed

Dismantling posts or struts (wood, steel or R.C.C.) embedded in natural ground any section, including taking out embedded portion and making good disturbed ground post complete all as specified and directed

Dismantling fencing wire mesh, any type

M&L for dismantling structural steel/mild steel work including doors, gates but excluding framed truss etc. complete all as specified and directed

M&L Mild steel bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to complete all as specified and directed

M&L Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) fixed in repair complete all as specified and directed

Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface in soft/ loose soil complete all as specified and directed.

M&L Cement concrete 1:3:6 Type C-2 ( 40 mm graded aggregates ) in foundations filling and mass concrete complete all as specified and directed

S&F MS work as in angle iron fencing post, fixed independently for fixing chain link fence, including all necessary cutting, drilling holes, bolting etc for screwing chain link fencing complete all as specified and directed

M&L Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc. complete all as specified and directed

Supply only Chain link MS galvanisd fencing, any size or type fixed to angle iron fencing post or angle frame complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh size and type of standards rails straining bars etc incl perovision of binding wire complete all as specified and directed

M&L for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long but n exc 10cm long complete all as specified and directed

M&L for preparation of new or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

M&L for two coats of synthetic enamel paint on steel surfaces exc 10 cm width or girth over one coat of red oxide primer after preparing old painted surfaces by scrapping and rubbing with sand paper complete all as specified and directed.

Dismantling corrugated or semi corrugated Asbestos cement sheets in roof coverings complete all as specified and directed

Dismantling of wrought iron or mild steel work of any description & fixed in any position, complete all as spcfd & as directed .

S&F Rolled sections as in as in post ,roof trusses (framed), trussed, purlins, crane gantries, rails , fastenings , heavy bracket framing (Beam, tee, angle, channel or flat sections,ms pipe) including distance pieces, cleats etc. conforming to Fe-410W Gde E-250 quality 'A' including cutting,welding etc complete all as specified and directed

M & L for Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed

Dismantling of stone slab and tiles of any description or thickness in floors, etc. laid dry or laid dry and pointed complete all as specified and directed

M&L for Machine cut kota stone slab flooring 18-20 mm thick over cement screed 20 mm thick in cement mortar 1:6, laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including necessary grinding ,rubbing to exposed edges and polishing complete all as specified and directed

M&L for Machine cut kota stone slab 18-20 mm thick in riser of steps, skirting, dedo and pillar laid over cement screed 15 mm thick in cement mortar 1:4, laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including necessary grinding ,rubbing to exposed edges and polishing complete all as specified and directed

S&F of three layred 1000 ltr ISI marked rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20mm brass ball valve Including dismantling of existing ater tank of 1000 Ltr capacityl as specified & directed in ssr part-I

S&F of 500 ltr ISI marked three layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position & including 20mm brass ball valve Including dismantling of existing water tank of 500 Ltr capacity all as specified & directed in ssr part-I

M&L for broken glass coping on top of walls in cement mortar 1:3 complete all as specified and directed

Supply only 50 mm HDPE pipe of pressure rating not less than 6 Kgf per squre cm to walls complete all as specified and directed

M&L Dismantling of reinforced concrete drain pipes any dia, jointed in cement mortar and taking out of trenches complete all as specified and as directed by Engineer-in-Charge.

M&L Reinforced concrete pipes 300 dia , class NP3, laid and jointed complete with collars complete all as specified and as directed by Engineer-in-Charge.

M&L Reinforced concrete pipes 450 dia , class NP3, laid and jointed complete with collars complete all as specified and directed

M&L for broken stone or boulders in hardcore of gauge exc 63 mm but n exc 100 mm deposited spread and levelled in layers n. exc 15 cm thick watered and rolled/rammed to a true surface complete all as specified and directed

M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed & pointed in neat cement slurry in floors with grey cement & pigment over 15 mm thick screed in CM (1:6), complete all as specified and directed

M & L Preparation of old decorated plastered or undecorated plastered surface of wall including cornices, pilasters etc by brooming down, steel wire brushing ,scraping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash on wall complete all as specified and directed

M&L for Preparation of old decorative concrete, plastered/ un-plastered surface of wall including cornices, pilasters etc by brooming down, steel wire brushing ,scraping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots removing nails and filling small holes by putty and prepare the surface and applying one coat of cement based paint of approved colour complete all as specified and as directed.

S&F of 5000 ltr ISI marked three layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position & including 20mm brass ball valve Including dismantling of existing water tank of 5000 Ltr capacity all as specified & directed in ssr part-I

M/S MAMTA CONSTRUCTIONS (BID ID -3090183)

GANGA CONSTRUCTION (BID ID -3090702)

Tulsi Enterprises (BID ID -3093343)

Sadhana Enterprises (BID ID -3089707)