Loading
Loading…
Loading…
Tender Value
₹1.0 Cr
EMD Value
₹2.0 L
Closing Date
3 Sept 2026, 3:00 pm5d left
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
WORKS
14 conditions · 3 needing a document upload
10.2. Financial Eligibility Criteria:The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
10.1 Technical Eligibility Criteria: The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work costing not less than the amount equal to 60% of advertised value of the tender.
Contractor should have physically completed the following: "Repair/ Rehabilitation/ Overhauling/AMC/Supply, erection, testing and commissioning of Central AC unit/Window AC/Package AC units/Air conditioning duct/Split type AC units/water coolers etc". The work must have been carried out in any of the following organization:- a) Central Government department or State Government department b) Central Government PSUs or State Government PSUs.
10 conditions · 5 needing a document upload
Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Note: Details of Tender Notice, Tender document & corrigendum issued from time to time along with eligibility criteria are available on this website www.ireps.gov.in .Necessary changes if required, would be posted on this website at least 15 days prior to opening of tender .
Provision of Air conditioner with ductable arrangement and associated items,in connection with new BG line in (Borvihir) Dhule- Nardana Section, in Bhusawal Division of Central Railway.
BSL-LC-Tender-16-2026~CR
BSL-LC-Tender-16-2026
Open
Works - General
12 Months
Jalgaon, Maharashtra
₹0
₹2.0 L
7 Aug 2026
7 Aug 2026
20 Aug 2026
43 items across 1 schedule · ₹1,01,22,352 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | 1(A)Supply of 8.5 Ton Inverter Ductable Split AC unit with power saving highly efficient QCO compliance with ISI mark, Inverter compressor with 8.5 TR * 1 nos condensing unit (out door unit), single indoor (unit capacity 8.5 Tr), Indoor unit, Air flow rate - 3178/2755/2295, Sound pressure - 47/45/43, Dimension (mm)- 1560*460*590, Net weight - 85 Kg, Out door unit, sound pressure - 59, Dimension (mm)- 950*1380*330, Net weight - 108 Kg | Numbers | 10.00 | 2,19,105 | 21,91,050 |
| 2 | 1(B)Erection of 8.5 Ton Inverter Ductable Split AC unit with power saving highly efficient QCO compliance with ISI mark, Inverter compressor with 8.5 TR * 1 nos condensing unit (out door unit), single indoor (unit capacity 8.5 Tr), Indoor unit, Air flow rate - 3178/2755/2295, Sound pressure - 47/45/43, Dimension (mm)- 1560*460*590, Net weight - 85 Kg, Out door unit, sound pressure - 59, Dimension (mm)- 950*1380*330, Net weight - 108 Kg | Numbers | 10.00 | 24,345 | 2,43,450 |
| 3 | (2)Supply & erection of 18 G Hard copper refrigerant copper piping 11/8" & 5/8" with required 12 mm thick Rubber Nitrile insulation complete, with all required fixing, clamping and accessories. | Metre | 125.00 | 888 | 1,11,000 |
| 4 | 3(A)Supply of 22 SWG GI Ducting fabricated with prime quality GI sheet. | Sqm | 400.00 | 2,062 | 8,24,800 |
| 5 | 3(B)Fabrication and installation of 22 SWG GI Ducting fabricated with prime quality GI sheet. | Sqm | 400.00 | 442 | 1,76,800 |
| 6 | 4(A)Supply of 24 SWG GI Ducting fabricated with prime quality GI sheet. | Sqm | 1500.00 | 2,062 | 30,93,000 |
| 7 | 4(B)Fabrication and installation of 24 SWG GI Ducting fabricated with prime quality GI sheet. | Sqm | 1500.00 | 442 | 6,63,000 |
| 8 | 5(A)Supply of MS work of miscellaneous size and for cable tray etc.including painting complete. | Kg | 1250.00 | 47 | 58,750 |
| 9 | 5(B)Fabrication, fixing and erection of MS work of miscellaneous size and for cable tray etc.including painting complete. | Kg | 1250.00 | 8 | 10,000 |
| 10 | 6(A)Supply of volume control duct damper & coller Damper. | Numbers | 10.00 | 7,568 | 75,680 |
| 11 | 6(B)Fixing of volume control duct damper & coller Damper. | Numbers | 10.00 | 1,921 | 19,210 |
| 12 | (7)Supply & fixing of supply & return air aluminium Powder coated Grills. | Square Foot | 188.00 | 323 | 60,724 |
| 13 | (8)Supply and fixing of water proof flexible canvas connection. | Numbers | 10.00 | 625 | 6,250 |
| 14 | (9)Supply and erection of 3 Phase protection under voltage, over voltage and timer circuit | Numbers | 5.00 | 54,000 | 2,70,000 |
| 15 | 10(A)Supply of Distribution Box . | Numbers | 5.00 | 948 | 4,740 |
| 16 | 10(B)Erection of Distribution Box . | Numbers | 5.00 | 105 | 525 |
| 17 | 11(A)Supply of 2 No 4 pole RCCB 40 A, leakage current 300 mA | Numbers | 5.00 | 9,297 | 46,485 |
| 18 | 11(B)Erection, testing and commissioning of 2 No 4 pole RCCB 40 A, leakage current 300 mA | Numbers | 5.00 | 1,033 | 5,165 |
| 19 | (12)Transportation and laying of Railways 6 sq mm 4 core copper XLPE round armoured cable from railway store at BSL to site. | Metre | 392.00 | 14 | 5,488 |
| 20 | 13(A)Supply of Acoustic insulation by Open cell Nitrile rubber 10mm thick. | Sqm | 2050.00 | 609 | 12,48,450 |
| 21 | 13(B)Installation and fixing of Acoustic insulation by Open cell Nitrile rubber 10mm thick. | Sqm | 2000.00 | 107 | 2,14,000 |
| 22 | (14)Supply and erection of POP work for indoor unit,Civil work (Wall break) colouring. | Job | 5.00 | 30,391 | 1,51,955 |
| 23 | 15(A)Refrigerant R410a for Supply | Kg | 125.00 | 1,490 | 1,86,250 |
| 24 | 15(B)Refrigerant R410a for Commissioning | Kg | 125.00 | 152 | 19,000 |
| 25 | 16(A)Supply of Busbar box 100/200 amps capacity. | Numbers | 5.00 | 2,511 | 12,555 |
| 26 | 16(B)Erection, testing and commissioning of Busbar box 100/200 amps capacity. | Numbers | 5.00 | 305 | 1,525 |
| 27 | (17)Trenching of LT cables of various sizes | Metre | 315.00 | 169 | 53,235 |
| 28 | (18)Transportation, laying in provided trench, installation, testing and commissioning of LT cables. | Metre | 500.00 | 21 | 10,500 |
| 29 | (19)Transportation, laying, installation, testing and commissioning of LT cables in AIR/Culvert/wall | Metre | 250.00 | 23 | 5,750 |
| 30 | 20(A)Supply of cable termination for 4Cx25, 4Cx50, 4Cx70 and 4Cx35 Sq.mm cable. | Numbers | 20.00 | 131 | 2,620 |
| 31 | 20(B)Erection of cable termination for 4Cx25, 4Cx50, 4Cx70 and 4Cx35 Sq.mm cable. | Numbers | 20.00 | 17 | 340 |
| 32 | 21(A)Supply of Maintenance free earthing arrangement complete. | Numbers | 5.00 | 13,127 | 65,635 |
| 33 | 21(B)Erection, testing and commissioning of Maintenance free earthing arrangement complete. | Numbers | 5.00 | 2,322 | 11,610 |
| 34 | 22(A)Providing of Hot dipped Galvanised perforated type cable tray manufactured from 16 SWG (1.6mm thick) GI Sheet of 300mm width & 100mm height comprising all requited standard accessories. | Metre | 125.00 | 948 | 1,18,500 |
| 35 | 22(B)Erecting of Hot dipped Galvanised perforated type cable tray manufactured from 16 SWG (1.6mm thick) GI Sheet of 300mm width & 100mm height comprising all requited standard accessories. | Metre | 125.00 | 118 | 14,750 |
| 36 | 23(A)Providing hot dipped galvanised cover suitable for perforated type Cable tray manufactured from 18 SWG (1.2mm thick) GI sheet of 300mm width & 20mm height complete with necessary hardware. | Metre | 125.00 | 746 | 93,250 |
| 37 | 23(B)Erecting hot dipped galvanised cover suitable for perforated type Cable tray manufactured from 18 SWG (1.2mm thick) GI sheet of 300mm width & 20mm height complete with necessary hardware. | Metre | 125.00 | 70 | 8,750 |
| 38 | 24(A)Supply of 1.5 Sq.mm, 3 core, flexiable wire for control cable. | Metre | 155.00 | 48 | 7,440 |
| 39 | 24(B)Erection, testing and commissioning of 1.5 Sq.mm, 3 core, flexiable wire for control cable. | Metre | 155.00 | 24 | 3,720 |
| 40 | 25(A)Supply of 0.75 Sq. mm 2 core shilelded cable for control Circuit | Metre | 155.00 | 95 | 14,725 |
| 41 | 25(B)Erection, testing and commissioning of 0.75 Sq. mm 2 core shilelded cable for control Circuit | Metre | 155.00 | 10 | 1,550 |
| 42 | 26(A)Supply of 25 x 3mm GI flat | Metre | 125.00 | 75 | 9,375 |
| 43 | 26(B)Erection of 25 x 3mm GI flat | Metre | 125.00 | 6 | 750 |
| Schedule total | ₹1,01,22,352 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCCCorrection1to111.pdf
ATTACHMENT
TenderDocument16-2026.pdf
ATTACHMENT
SummaryofMandatoryDocumentstobeattached.pdf Summary of Mandatory Documents to b
ATTACHMENT
SummaryofMandatoryDocumentstobeattached.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].