Construction of 25 nos temperory bathroom and 10 nos.WC room including OHT for 200 Defence personnals at GSSS Swarajdweep for VVIP visit 2021

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Providing wood work in framed structure for frames,posts,shutters,walls, purlins, and rafters up to 10 metres span and 5 metres height including cutting,fixing in position,nails,screws,etc. all complete as per the direction of EIC.

Kiln seasoned and chemically treated hardwood cat II B

Providing corrugated G.S. sheet walling in vertical /Horizontal surface fixed with necessary nails,screws etc. complete excluding the cost of frame work and including cutting to size and shape wherever required.

0.18 mm thick

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete :

Dismantling walling sheets etc., and stacking the material within 500 metres lead of:

G.S sheets

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall

20 mm nominal outer dia Pipes

25 mm nominal outer dia Pipes

40 mm nominal outer dia Pipes

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :

15 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

25 mm nominal bore

40 mm nominal bore

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :

W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing 2 in 1 C.P. brass bib cock with health faccut and flexible pipe of approved quality conforming to IS:8931 :

15 mm nominal bore

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :

100 mm diameter

Dismantling wood work in frames,posts,walls,shutters etc including stacking the material within 50 metres lead :

Of sectional area 40 square centimetres and above

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge.

Providing and fixing 19mm thick commercial plywood , in stage/platforms with necessary nails, self drilling screws etc. complete.

Dismantling plywood of any thickness from platforms, walls and partitions, excluding supporting members but including stacking within 50 metres lead.

M/s Sagar Enterprises

Shri Pankaj Roy