REPAIR/MAINT OF PUMPS,MOTORS,STARTERS,CONTROL PANELS AND OTHER WORKS, CHLORINATION PLANT AND FILTRATION PLANT AT SWIMMING POOL, REPAIR/REPLACEMENT OF CI/GI PIPE LINE, CONTROL VALVES AND CLEANING/PAINTING OF OVERHEAD TANK AT DAMANA UNDER GE JAMMU

Amount

M & L for brick work with sub class 'B' bricks straight or curved on plan not exc. 6 m mean radius built in CM 1:4 for sluice valve pit all as specified and as directed.

M & L for rendering plaster 10 mm thick on fair face of brick work or concrete surface inside sluice valve pit in CM 1:6 complete all as specified and directed.

Taking down plaster of any thickness on brick or stone wall of sluice valve pit including racking out joints, hacking for key, scrubing down, of any description complete all as specified and directed.

M & L for preparation of rusted or previous untreated surface of old painted surface of sluice valve pit MS sheet cover scrubing, cleaning and painting to sluice valve pit both side of any description over 10 cm in wide or girth not otherwise described and painted with synthetic enamelled black paint two coat over a coat of red oxide primer including writing location/area with white paint all as specified and directed.

Taking out UNSV/damage sluice valve pit MS top cover of size 1.20 m X 1.20 m along with angle iron frame for repair, denting, necessary welding work, provn of replacement of two nos of MS hings 6" heavy duty and provn of lifting handle and refixing in position along with angle iron frame with the help of nut, bolt after necessary repair/in position as per site requirement complete all as specified and directed.

Excavation in trenches not exceeding 1.5 M wide and not exceeding 1.5 M in depth and getting out in any type of soil for taking up or laying of GI/CI pipe line all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cms complete all as specified and directed.

Removing excavated material to a distance not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above starting point complete all as specified and directed.

Taking out UNSV sluice valve of size 150 mm bore dia in position for repair complete with refacing, regrinding, replacing staffing box of spindle, nut, bolt, washer, rubber gaskits, repair to GM seat with gaskit, gland cup filling gland dori and refixing after repair in site complete all as specified and directed.

All as per ser item no 9 above here in before but of size 100 mm dia complete all as specified and directed.

M & L for replacement of tubing GI "Medium Grade" with all fittings laid in floor or trenches including taking out old UNSV pipe of size 150 mm dia complete all as specified and directed.

M & L for replacement of tubing GI "Medium Grade" with all fittings laid in floor or trenches including taking out old UNSV pipe of size 100 mm dia complete all as specified and directed.

M & L for replacement of tubing GI "Medium Grade" with all fittings laid in floor or trenches including taking out old UNSV pipe of size 80 mm dia complete all as specified and directed.

M & L for replacement of tubing GI "Medium Grade" with all fittings laid in floor or trenches including taking out old UNSV pipe of size 50 mm dia complete all as specified and directed.

M & L for replacement of tubing GI "Medium Grade" with all fittings laid in floor or trenches including taking out old UNSV pipe of size 40 mm dia complete all as specified and directed.

M & L for replacement of tubing GI "Medium Grade" with all fittings laid in floor or trenches including taking out old UNSV pipe of size 25 mm dia complete all as specified and directed.

M & L for replacement of tubing GI "Medium Grade" with all fittings laid in floor or trenches including taking out old UNSV pipe of size 20 mm dia complete all as specified and directed.

M & L for replacement of gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of size 50 mm bore complete all as specified and directed.

M & L for replacement of gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of size 40 mm bore complete all as specified and directed.

M & L for replacement of cast iron pipe with spigot & socket ends centrifugally cast class 'B' of any length conforming to ISI laid in trenches of size 150 mm bore complete all as specified and directed.

M & L for replacement of cast iron pipe with spigot & socket ends centrifugally cast class 'B' of any length conforming to ISI laid in trenches of size 100 mm bore complete all as specified and directed.

M & L for replacement of cast iron pipe with flanged ends centrifugally cast class 'B' of any length conforming to ISI laid in trenches of size 100 mm bore complete all as specified and directed.

M & L for replacement of cast iron water main with flanged and centrifugally cast class 'B' in any length laid in trenches of size 150 mm bore complete all as specified and directed.

M & L for replacement of CI fitting any type, radius and angle for spigot and socketed and flanged pipes, laid piece both end flanged or one end flanged other sockested, cap, plug, dead end flanged, split collar, reducer of any size upto 150 mm bore pipe complete all as specified and directed.

M & L for replacement of CI sluice valve PN 1.6 with iron wheel head of size 150 mm bore with stainless steel spindle both end flanged complete with nut, bolts, washer and rubber gaskit 3 mm thick conforming to ISI 14846/2000 complete all as specified and directed.

M & L for replacement of CI sluice valve PN 1.6 with iron wheel head of size 100 mm bore with stainless steel spindle both end flanged complete with nut, bolts, washer and rubber gaskit 3 mm thick conforming to ISI 14846/2000 complete all as specified and directed.

M & L for replacement of CI sluice valve PN 1.6 with iron wheel head of size 80 mm bore with stainless steel spindle both end flanged complete with nut, bolts, washer and rubber gaskit 3 mm thick conforming to ISI 14846/2000 complete all as specified and directed.

M & L for replacement of CI non return valve PN 1.6 of size 150 mm bore with stain less steel working part conforming to ISI 5312/2004 duly IS marked complete with rubber gaskit 3 mm thick and nut, bolts and washer couple all as specified and directed.

M & L for replacement of CI air release valve with double orifice with rubber valve of size 150 mm bore conforming to ISI 14845 complete with rubber gaskit and nut, bolts nd washer complete all as specified and directed.

M & L for replacement of CI single air release valve screwed of size 50 mm bore dia complete all as specified and directed.

M & L for replacement of foot valve of size 150 mm bore dia flanged end, lift type conforming to ISI 4038 with stain less steel working part complete with rubber gaskit and nut, bolts washers etc all as specified and directed by Engr-in Charge.

M & L for replacement of foot valve of size 80 mm bore dia flanged end, lift type conforming to ISI 4038 with stain less steel working part complete with rubber gaskit and nut, bolts washers etc all as specified and directed by Engr-in Charge.

M & L for replacement of discharge head assembly suitable for VT motor 20 to 50 HP with suction/discharge 150 mm bore complete as per site requirement complete all as specified and directed.

M & L for replacement of water pressure gauge 100 mm dia having pressure 10 kg complete with 3/8" brass sampling lock complete all as specified and directed.

M & L for replacement of CI split copper of size 150 mm dia complete with rubber gaskit 3 mm thick and nut, bolts, washer etc complete all as specified and directed.

M & L for fabrication, installation and commissioning of water hydrant made out of from MS tubing having length 2 mtr and 600 mm bore dia heavy duty confirming to ISI to sustain the water pressure complete with provn of 08 nos outlet distribution branches with provn of MS flange of suitable size, rubber gaskit and nut, bolt and washers of size 150 mm bore 03 nos, 100 mm bore dia 02 nos, 80 mm bore dia 02 nos, and 50 mm bore dia 01 nos of same material MS tubing and other e nd flanged having length of eachpieces 0.30 mtr appx suitable for fixing sluice valve complete with and including jointing with the existing CI rising/ distribution pipe of size 150 mm bore dia and provn of brick work/RCC base frame for water hydrant from complete all as specified and directed by the Engr-in-charge (fitting i.e valve, dead end plate, gaskit etc shall be measured and paid under respective items).

M & L for replacement of sluice valve spindle stainless steel suitable for 150 mm sluice valve complete with check nut complete all as specified and directed.

Disconnecting all incoming/outgoing electric connection from LT pannel/starter/electric motor carefully including dismantling/opening nut, bolt of discharge head and taking out submersible/VT motor pumping set complete with MS column pipe having capacity up to 50 HP and shifting in workshop for repair/servicing of pumping set and re-assembling/electric connection and testing at site on full load all as specified and directed by Engr-in-Charge.

Strip opening complete submersible pumping set having capacity up to 50 HP any stage/discharge and dismantling all spare parts by opening studs complete with machine/lathe ork/grinding/polishing and fitting of all spare parts and re-assembling installation in position after necessary repair / replacement of UNSV/defective spare parts complete all as specified and directed (Spare parts shall be measured & paid separately under respective items as under as per existing make and model at site):-

Supply only cast iron stage bowl complete all as specified and directed.

Supply only cast iron suction discharge chamber complete all as specified and directed.

Supply only stainless steel neck ring complete all as specified and directed.

Supply only stainless steel bowl bush complete all as specified and directed.

Supply only stainless steel coupling sleeves complete all as specified and directed.

Supply only cast iron impeller with key complete all as specified and directed.

Supply only body studs fully threaded complete all as specified and directed.

Supply only stainless steel pump shaft complete all as specified and directed.

Supply only stainless steel pump shaft coupling with key complete all as specified and directed.

Supply only cast iron NRV with NRV seat & cone complete all as specified and directed.

Supply only stainles steel sleeves for bowl complete all as specified and directed.

Supply only rubber bush complete all as specified and directed.

Supply only rinning strainer for pump complete all as specified and directed.

Supply only DOL end cap with washer & checknut complete all as specified and directed.

M&L for strip opening to submersible motor/ VT motor having capacity upto 50 HP and re-winding with super enamelled copper winding wire heavy duty heat resistence confirming to IS of same gauge and nos of turns complet with realignment of motor slotes and insulating mateials i.e varnishing, bamboo strips, leather papers, cotton tapes including replacement of UNSV/defective spare parts and drying complete and re-assembling after repair/rewinding and testing at site on full head complete all as specified and directed. (Spare parts shall be measured & paid separately under respective item as under as per existing make and model at site):-

Supply only thrust plate with circlip and key complete all as specified and directed.

Supply only thrust plate bearing housing complete all as specified and directed.

Supply only bearing for motor complete all as specified and directed.

Supply only rubber oil seal complete all as specified and directed.

Supply only cast iron sand guard complete all as specified and directed.

Supply only rubber diaphragam with plate complete all as specified and directed.

Supply only stainless steel sealing bush complete all as specified and directed.

Labour charges for welding, metalling, grinding, polishing and lathe/machine work for re-alignment to rotar assembly and making the suitable size for fitment of rotar bearing complete with replacement of UNSV/defective spare parts of capacity uo to 50 HP complete all as specified and directed. (Spare parts shall be measure and paid separately under respective items as under as per existing make and model at site):-

Supply only rotar sleeves stainless steel complete all as specified and directed.

Supply only rotar GM bearing bush complete all as specified and directed.

Supply only rotar upper & lower bearing housing complete all as specified and directed.

Supply only rotar upper & lower tee bolts complete all as specified and directed.

Supply only studs for adopter housing complete with plain washer and hex nut complete all as specified and directed.

Supply only GM drain plug complete all as specified and directed.

Supply and fixing in replacement of submersible cable 16 Sqmm 3 core flat copper conductor heavy duty 1100 volts grade confirming to ISI all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of oil immersed star delta starter heavy duty manual operated suitable for submersible pumping set heavy a relay overload relay range 110-130 Ampere, 415 volts, 50 Hz, 3 phase confirming to IS complete with initial filling of oil complete all as specified and directed.

All as per ser item no 44 here in before but overload relay range 28-40 Amp complete all as specified and directed.

Taking out all incoming/outgoing electric connection from LT pannel/starter/motor/voltage stabilizer carefully for repair to cable/rectification the fault and re-connecting in position after repair and preparation the cable and fixing complete with nut, bolts, washers for cable size 25 to 50 Sqmm complete all as specified and directed. (NOTE :- Preparation of 3.5 core cable, 4 wire each & will be considerable one job).

All as per ser item no 47 here in before but suitable for cable size 70-95 Sqmm complete all as specified and directed.

Supply and fixing in replacement of submersible motor rotor for up to 50 HP motor complete with bearing upper/lower bearing housing, sleeves, tee bolts and bush complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of submersible motor stater for capacity up to 50 HP complete with thrust plate, thrust bearing with housing, studes, water seal, sand guard, rubber diaphragam with plate, sealing bush complete all as specified and directed by Engr-in-Charge.

Material and Labour for fabrication of MS clamp made out from flate 150 mmx12 mm thick, bend to shape, drill a hole four nos in each clamp of size 16 mm dia suitable for holding MS column pipe size 150 mm dia. Complete with provn of four nos nuts, both 4" long and washer complete as per sample all as specified and directed.

Supply and fixing in replacement of cast iron discharge head assembly suitable for vertical turbine plumbing set having suction/discharge size 150 mm dia complete all as specified and directed by Engr-in-Charge.

Strip opening complete vertical turbine pumping set having capacity up to 50 HP any stage/discharge and dismantling all spare parts by opening studs complete with machine/lathe ork/grinding/polishing and fitting of all spare parts and re-assembling installation in position after necessary repair / replacement of UNSV/defective spare parts complete all as specified and directed. (Spare parts shall be measured & paid separately under respective items as under as per existing make and model at site):-

Supply only cast iron bowl complete all as specified and directed.

Supply only cast iron suction/discharge bowl complete all as specified and directed.

Supply only stainless steel neck ring complete all as specified and directed.

Supply only cast iron impellers with key complete all as specified and directed.

Supply only stainless steel shaft complete all as specified and directed.

Supply only stainless steel with key complete all as specified and directed.

Supply only cast iron NRV with seat complete all as specified and directed.

Supply only stainless steel bowl bush complete all as specified and directed.

Supply only rubber bush complete all as specified and directed.

Supply only body studs fully threaded complete all as specified and directed.

Supply only stainless steel sleeves complete all as specified and directed.

Dismantling of Centrifugal / mono block pump single stage of capacity 5 HP to 15 HP of any make ,striping,opening complete with replacement of necessary spares.Testing after repair ,refixing to its original position and transportation complete all as specified and directed. Note:- (Replacement of spares shall be measured and paid separately).

Rewinding of Centrifugal / mono block pump of cap 5 to15 HP with pvc insulated copper conductor wire of IS specification and apprporiate gauge ,incl all insulating material ,packing material ,taking out old burnt copper wire and painting with synthetic enamalled paint over two coat of redoxide after preperation of surface complete all as specified and directed.

S&F in replacement of spares of centrifugal/ monoblock pumps of any make of capacity 5 HP to 15 HP of any dia impeller complete all as specified and directed of following:-

Bearing of suitable size of motor complete all as specified and directed.

Pump overhauling GM bushes ,shaft rematteling making key gland packing,incl all engineering work complete all as specified and directed.

Bearing of suitable size of pump complete all as specified and directed.

Dismantling UNSV/leakage sluice valve CI of size 150 mm dia by opening nut, bolt for repair to valve sheet, replacement of steel spindle, valve gland cup with seat, filling gland dori, rubber, gaskit of suitable size and re-fitted in position after repair complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:3:6 type C-1 (Using 20 mm stone aggregate) as in mass filling for discharge head base complete with breaking/dismantling existing PCC block all as specified and directed by the Engr-in-Charge.

Supply and fixing in replacement of on load open execution change over switch 4 pole, 415 volt, 50 Hz 63 Amp confirming to IS all as specified and directed by Engr-in-Charge.

M&L for fabrication of angle iron bracket 40x40x6 mm thick cutting, bend to shape drilling hole 16 mm 4 nos each bracket welding MS flat of 20 mmx3 mm thick in each bracket and fixed on the wall with the help of nut, bolt suitable for run the cable of any size as per site requirement as specified and directed by the Engr-in-Charge.

M&L for Altoch GP, packed in 45 kg drum complete all as specified and directed. Make:- Declibac or equivalent of best as spproved by Engr-in-Charge/GE.

S&F in replacement of MCCB 4 pole, 125 amp, 16 KA, 415 volt, 50 Hz complete all as specified and directed

Dismantling and taking down electric motor of dozing system and shifting in workshop for repair and rewinding with super enamelled copper winding wire of same gauge and nos of turns complete with insulated material i.e. varnish,cotton tape,bamboo strips,emory paper and drying including replacement of UNSV spare parts complete all as specified and directed. (Spare parts shall be measured and paid separatly under respective items as per existing make and model at site)

Supply only motor seal complete all as specified and directed.

Supply only motor bearing complete all as specified and directed.

Supply only motor fan blade complete all as specified and directed.

Supply only rotor shaft complete all as specified and directed.

Supply only coupling complete all as specified and directed.

Dismantling and taking down dozing pumping set and shifting in workshop for repair/maintenance/overhauling and reassembly after necessary repair complete with and including replacement of UNSV/defective spare parts and tested on load at site complete all as specified and directed. (Spare parts shall be measured and paid separately under respective items as per existing make and model at site)

Supply only Agitor assembly complete all as specified and directed.

Supply only Agitor bearing complete all as specified and directed.

Supply only Agitor Shaft with ss blade duty FRP coated complete all as specified and directed.

Supply only foot valve complete all as specified and directed.

Supply only suction Valve complete all as specified and directed.

Supply only discharge valve complete all as specified and directed.

Supply only injection fitting complete all as specified and directed.

Supply only PE tubing 5/8'' (8 mtr) complete all as specified and directed.

Supply only solenoid motor complete all as specified and directed.

Supply only main head (PP/PVC) complete all as specified and directed.

Supply only main head hex bolts complete all as specified and directed.

Supply only diphragm (taflon faced) complete all as specified and directed.

Supply only Acrylic front cover complete all as specified and directed.

Supply only speed/stroke nob complete all as specified and directed.

Supply only toggle switch complete all as specified and directed.

Supply only strainer for foot valve complete all as specified and directed.

Supply only electronic controlled circuit plate complete all as specified and directed.

Supply only NRV Spring complete all as specified and directed.

Supply only Air release valve complete all as specified and directed.

Supply only power chord with plug complete all as specified and directed.

Supply only injection check valve (NRV) complete all as specified and directed.

Supply and fixing in replacement of heavy duty FRP service tank 150 liters comlete with drain valve , level gauge ,water inlet/outlet provn and CPV 15 mm pipe for feeding to main line complete all as specified and directed.

M&L for fabricated MS Angle iron frame heavy duty epoxy coated & anticorrosive paint bend to shape bending ,welding and fixing on wall/floor to take the load of complete dozing system to avoid direct load of motor on tank complete as specied and directed by the Engr-in-Charge.

Supply and fixing in replacement of chlorine test kit with coloured sample complete with all testing fillaments and OT solution in rexin finish wooden box all as specified and directed.

Supply and fixing in replacement of water pressure gauge 7Kg/10Kg heavy duty 100mm dia complete with brass sampling cock 3/8" and pressue gauge cock complete all as specified and directed.

Supply and fixing in replacement of OT solution chlorine test (500 ml) complete all as specified and directed.

S&F in repair two single core 4 Sqmm for Sub Main wiring with copper conductor multistranded PVC insulated and unsheathed 1100Volts grade in and including concealed PVC conduit with fixing accessories including one run of 2.5 Sqmm copper conductor as earth wire complete all as specified and directed. (Note - Two runs of 04 Sqmm cable, one run of 2.5 Sqmm earth cable and one run of PVC conduit shall be measured as one running meter).

S&F in replacement of DOL Starter single phase 220 Volt for Dozing pump of existing make and capcity all as specified and directed.

Material & Labour for Plastic cylinder sealed disposable floating sanitizer for disinfection of swimming pool water containing algaecide & coagulant with arrengement for controlled release of active ingredients in water and head suspender complete all as specified and directed. Cat Part No : STEQUA 412 HD MAKE:- DECLIBAC TECH PVT LTD or equivalent of best as spproved by Engr-in-Charge/GE.

M/s. Aggarwal Engineers

M/s Sahib Construction and engineers

M/s Pee Kay Enterprises

Bidder Name

Sarbat Construction Co

M/s Pee Kay Enterprises

M/s. Aggarwal Engineers

M/s Sahib Construction and engineers