PROVN OF PATHWAY FOR BLDG NO P 412 OPT517 T03 AND T18 IN F ZONE ADDN ALTN TO BLDG NO T10 IN M ZONE PROVN OF 01 XTOILET AND BATHROOM AT MT AREA IN A ZONE PROVISIONING OF HARDSTANDING FOR MT VEH PARK IN D ZONE ADDN ALTN OF TOILET FOR BLDG NO T35 IN J Z

Demolition of brick work or stone / boulder masonry, built in cement mortar and including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and raming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface in soft/ loose soil complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation etc or for shafts, wells, cesspits, manhole, pier holes, etc not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed.

M&L for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.

M&L for brick work with sub class B bricks (using old size burnt bricks) straight or curved on plan exceeding 6 m mean radius, built in Cement Mortar (1:6) complete all as specified and as directed.

M&L for brick work with sub class B bricks(using old size burnt bricks) straight or curved on plan exceeding 6 m mean radius, built in Cement Mortar (1:4) complete all as specified and as directed.

M&L for PCC (1:3:6) type C-2 (using 40mm grade stone aggregate) as in foundation etc and mass concrete complete all as specified and as directed.

S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed.

S & F 0.50mm thick pre-painted galvalume aluminiun zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge and valley complete all as specified and directed.

S&F steel work in tubular trusses, post, purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and as directed.

S&F PVC valley gutters half round with rounded edges 3 to 4mm thick 200mm dia all as specified and directed by Engr - in - Charge.

Material and labour preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

S&F framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. not exceeding 10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S & F for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if reqd : hooks (stay), heavy, for large gates, hook and pintle hinges : large hasps and staples; chains; hand made sliding bolts ; clamps; hold fasts; waal ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts,; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde E-165

M&L for chequered cement concrete tiles 200x200x25mm thick over and including 15mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes, etc, set, jointed and pointed in neat cement slurry with grey cement and pigments complete all as specified and directed.

Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25cm thickness.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point

Surface excavation not exceeding 30 cm deep and average 15 cm deep and getting out in any type of soil

M&L for RCC nominal mix type A-1 grade using 20mm graded stone aggregates as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for RCC (1:1½:3 )nominal mix type A-1 grade using 20mm graded stone aggregate as in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for RCC (1:1½:3 ) nominal mix type A-1 grade using 20mm graded stone as in beams, cantilvers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for RCC (1:1½:3 ) nominal mix type A-1 grade using 20mm graded stone as in Chajjas, all as specified and as directed.

M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed.

All same as per item No 24 above but 5mm dia and over and including 10mm dia in stirrups spacers and binders all as specified and as directed.

Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions all as specified and as directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter all as specified and as directed..

Use and waste of formwork to sides and soffits of floors or roof beams, lintel, beams haunchings, girders,bressummers lintels, cantilevers, shelves including supports overhangs etc also splays between floors and beams etc. all as specified and as directed.

Use and waste formwork to chullah hoods, chajjas, troughs and similar items including edges all as specified and as directed.

M&L for hard core of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick watered and ramed to a true surface all as specified and as directed..

M&L for PCC 1:4:8, type D-2 using 40mm graded crushed stone aggregate as in sub base 100 mm thick and surfaces finished even and fair all as specified and as directed.

M&L for PCC 1:4:8, type D-2 using 40mm graded crushed stone aggregate as in sub base 75 mm thick and surfaces finished even and fair all as specified and as directed.

S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming Fe-410-W (Gde-E-250) quality-A and painted one shop coat of zinc chromate primer paint (including preparation of surface) at contractors workshop before fabrication.

S&F for Plate (plane or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc conforming to Fe- 410-w

M&L for brick work with sub class `B' bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 and surfaces finished even and fair all as specified and as directed.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 using water proofing compound @ 3% by wt of cement and surfaces finished even and smooth without using extra cement and surfaces finished even and fair, all as specified and as directed. (WPC will be measured and paid separately)

Supply only Integral water proofing compound ISI marked.

M&L for rendering 10 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6 and surfaces finished even and smooth without using extra cement and surfaces finished even and fair all as specified and as directed.

M&L for PCC type B1(1:2:4) using 20 mm graded cushed stone agg as in surface channels and drain beds and coping complete all as specified and directed.

M&L for applying two coats of oil bound distemper over and including one coat of primer over and including a coat of 3mm thick wall care putty on new plastered surfaces of walls including preparation of new surface complete all as specified and directed.

M & L preparing the newly plastered surfaces of wall and applying two coat of exterior weather paint, over and including one coat of primer of wall surface complete all as specified and as directed.

M&L for 75mm thick PCC in 1:3:6 type C1 (using 20mm graded agg ) as in plinth protection/path finished the surface even and smooth without using extra cement all as specified and as directed.

M&L for 5.5mm thick Sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sq. m in each pane all as specified and as directed.

S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5sqm in each pane complete all as specified and as directed.

S&F brass mortice lock 100mm 4 lever all as specified and as directed.

M&L for Double action floor spring hydraulically regulated made up of min 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and as directed.

M & L Vitrified coloured/light tiles 600x600x8-10mm thick as in floors set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed or beddding layer of CM 1:4, topping layer finished even and rough all as specified and as directed.

M & L Vitrified coloured/light tiles 600x600x8-10mm thick as in skirting set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed or beddding layer of CM 1:4, topping layer finished even and rough all as specified and as directed.

S & F for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) non asbestos fibre cement reinforced multipurpose board, pre-primetered self embossed, textured designer board E-Board Classic fixed or laid/inserted to timber/ GI frame work with screws to be fixed in ceiling flat or sloping and Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre both ways, size of grid 605 x 605mm fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size complete all as specified and as directed.

S&F Solid PVC Door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supplying and fixing in opening as per specification and drawing.

Material and labour factory made solid panel PVC door shutter, 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frames shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles plain colour PVC sheets for top rail, lock rail and bootom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame, welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site with three nos of MS higes medium grade.

S&F MS butt hings medium weight cold rolled 100mm size all as specified and as directed.

S&F 150 mm long aluminium anodised tower bolts all as specified and as directed.

S&F 100mm long aluminium anodised handles cast copper all as specified and as directed.

S&F Aluminum alloy sliding door bolt 300mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and as directed.

S&F for steel ventilator with top hung shutter including hinges steel peg stay, complete all as specified and directed.

M & L sheet glass, obscured or frosted 3mm thick and glazing with oil putty in squares. nexc 0.5 Sqm each

M&L of sand filling under floor well ramming including watering as required Spreading & leveling in layers n.exc. 25cm thick

M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) in section exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in Cement Mortar 1:6 complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick CM (1:4) backing coat.

M&L preparation of new surfaces & applying two coats cement base paint over a coat of primer complete all as specified and directed.

S&F 20mm bore GI water tubing medium grade laid in floors or fixed in wall with GI fittings complete all as specified and as directed.

Supply and laying tubes Medium grade GI tubing with all fittings, fixed complete to walls/poles/laid in floors/trenches/road crossing of size 15 mm dia bore complete all as specified and as directed.

S&F PVC (SWR) 110mm dia single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and as directed.

S&F PVC (SWR) 110mm dia bends in any radius complete all as specified and as directed.

S&F PVC (SWR) 110mm dia junction single T equal or un equal with an floor complete all as specified and as directed.

S&F of PVC (SWR) 75 mm dia pipe as per specification complete all as specified and as directed.

S&F of PVC (SWR) 75 mm dia vent cowl pipe as per specification complete all as specified and as directed.

M & L for 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S & F 75mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 15mm bore bib tap cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all specified and as directed.

S&F 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all specified and as directed.

S&F 15mm bore angle stop cock, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe complete all specified and as directed.

S&F PVC low level flushing cistern 10 ltr capacity syphonic action type white body with MS bracket , inlet ball valve, float handle and flush pipe (for EWC or WC) etc complete all specified and as directed.

S&F for PVC Connection pipe 15mm size with PTMT nuts of length 450 mm complete all specified and as directed.

M&L for vitreous china squatting pan, Orissa, pattern size 580 x 440 mm white with integral foot rests(excluding flushing cistern and flush pipe)including connection to trap and to flushing pipe, anti-syphonage pipe etc complete including making good to floor complete all as per specified and directed.

S&F vitreous china wash basin, size 550 x 400mm white including brackets, and waste coupling & pipe of 32mm dia, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all specified and as directed.

S&F toilet paper holder, coloured vitreous china, box type fixed in wall complete all specified and as directed.

S&F soap dish, vitreous china white, aprox size 160 X 160 X 90 mm. fixed to plugs with chromium plated brass screws complete all specified and as directed.

S&F mirror of size 450x600x5mm thick with aluminium frame and mounted on 6mm ply confirming to IS, with two Nos of hanging hooks fixed complete all specified and as directed.

S&F CP grating 100mm dia PTMT with waste hole complete all specified and as directed.

S&F PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all specified and as directed.

M & L Viterous china ware wash down water closet pan (EWC), pedestal pattern coloured including plastic WC seat black closd pattern with flat bottom and cover and mild steel chromium plated of aluminised hinging device, complete all specified and as directed.

S&F CP Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and directed for WC complete all specified and as directed.

S&F for vitrious china urinal, half stall type, white including flushing cistern, flush pipe and waste pipe. CP waste coupling complete all specified and as directed.

S & F for Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe(Minimum weight 60gms) complete all specified and as directed.

S&f Rotational moulded Polyethylene water storage tank -1000 liters capacity (cylidrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I with and including brass float valve 25mm dia complete all as specified and directed

S&F for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 22.5 cm but n exc 30cm long and 16 to 20mm dia of neck complete all specified and as directed.

S & F of 20mm gate valve (brass insert) as per requirement of the site complete all as specified and directed.

Excavation over areas not exceeding 1.5m deep & getting out soft/loose soil complete all specified and as directed.

Excavation over areas exc 1.5m deep & n.exc 3 m deep and getting out in soft/loose soil complete all specified and as directed.

M & L for precast cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in manhole cover slabs round square or rectangular in shape and set in CM 1:4 complete all specified and as directed.

M & L for PCC (1:3:6) type C-2 using 20mm graded aggregate as in coping including necessary form work complete all as specified and directed.

M & L RCC nominal mix Type M-20 (using 20mm graded stone aggregate) as in slabs suported on wall complete all as specified and directed.

Form work to the soffits and side suspended slab finish even and smooth complete all as specified and directed.

S&F AC vent pipe 80mm dia complete all as specified and directed.

S&F AC bends plain for pipe 80mm dia complete all as specified and directed.

S&F AC slotted vent cowl 80mm dia complete all as specified and directed.

M & L for Soakage wells excavation ,in any type of soil,foundation in PCC 1:3:6 walls of honey combed masonry with top ring of M-25 Concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC Cover slab in M25/ SFRC Cover, interconnecting pipes of RCC/DWC Complete filled with brick bats of size 1.8 M dia x 3.0 M effective depth complete all as specified and directed.

M & L for DWCPE(SN8) 180(OD)/163(ID) mm diameter Pipes laid on 150 mm thick PCC 1:4:8 bed with excavation in any type of soil, including manholes/drop manhole of standard size made of Brick masonry/ RCC/Precast RCC with SFRC ventilating cover and frame. Includes all items and activities to execute and make sewer line functional for depth 0.70m – 1.65 m complete all as specified and directed.

M & L for PCC 1 :2:4 type B2 using 40mm graded stone aggregate and paving 100mm thick complete all as specified and directed.

M & L for forming contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block coloured with grey cement and no pigment of any shape and size confirming to IS 15658-2006 of 60 mm thickness M-40 grade set jointed and pointed with grey cement including 25mm thick sand cushioning complete all as specified and directed.

M & L for PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in mass concrete complete all as specified and directed.

Supply only Integral water proofing compound ISI marked.

M & L for Damp proof courses in cement concrete 1:2:4, type B-0 of 40mm thick to horizontal surfaces including necessary formwork complete all as specified and directed

M & L for PCC type B-1, 1:2:4 (20mm graded stone aggregate) 25mm thick as in subbase of flooring finished even and fair using extra cement

S & F Compound girders and stanchions, lattice girder, aerialmasts, staging for water tank and the like incl caps, bases, splices etc. built up from two or more beam or chennel section or angles with plate, incl all lattice bars using Fe 410-W(Gde-E-250) quility-A Fe

S & F framed work such as grill framed guard for fixing arrangement for wire cloth & sheet glass etc.

M & L for 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pined joints complete all as specified and directed.

S & F MS handle 150mm long oval type complete all as specified and directed.

M & L butt hinges, medium weight 75mm long size complete all as specified and directed.

S & F Aluminium anodised barrel tower bolt of extruded section and fixed 100mm long complete all as specified and directed.

S & F 125mm size aluminium handles, cast type, anodised all as directed complete all as specified and directed

S & F aluminium anodised barrel tower bolt of extruded section and fixed 200mm long complete all as specified and directed.

M/L 30mm thick 2nd class hard wood Glazed and skelton window and ventilator shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated without sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(b) complete all as specified and directed.

S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

M&L for preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for applying two coats of oil bound distemper over and including one coat of primer over and including a coat of 1.5mm thick wall care putty on new plastered surfaces of walls including preparation of new surface complete all as specified and directed.

S&F 20mm medium grade bore GI water tubing medium grade laid in floors or fixed in wall with GI fittings complete all as specified and directed.

S&F15mm medium grade bore GI water tubing medium grade laid in floors or fixed in wall with GI fittings complete all as specified and directed.

S & F health faucet of CP 15mm bore fancy type with suitable fexible pipe as per site requirement incl CP nipple with socket all as directed by Engr-in-charge. Make Essco Cat No-ALE-ESS-585 or equivalent of make listed in list of manufacturers attached here-in-after.

M&L for cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exc 10 cm girth complete all as specified and directed.

S&F one piece EWC with vibe sence duroplast slim seat cover and twin flush fitting 660 x 350x 745mm (snow white) S trap 300mm and fitting complete all as directed.

S & F oval type vitreous china wash hand basin mounted in slab flat white size 550 x 400 mm including cutting for and pinning in ends. including waste fitting, brass, CP for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and as directed.

S & F central hole basin mixer fancy type 15mm dia complete all as specified and as directed.

S&F 15mm bore bib tap cast copper alloy, fancy type, CP with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F 15mm bore angle stop cock, fancy type and CP, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe complete all as specified and as directed.

S & F brass CP shower rose 125mm in size with or without swivel joints any size incl fixing to steel pipe or union complete all as specified and directed.

S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S&F CP towel rail 600mm long with brackets, aluminium anodised 20mm dia complete all as specified and as directed.

M&L for Granite (of any type) tiles 18-20mm as in platform thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing with nosing over 10 mm screed bed in CM 1:4 complete all as directed by Engr-in-Charge.

S&F PVC (SWR) 110mm dia single socketed in any length with rubber ring joints complete all as specified and as directed.

S & F PVC (SWR) 110mm dia bends any radius complete all as specified and as directed.

M & L for DWCPE (SN8) 150mm (ID) dia pipes laid in trenches complete all as specified and directed.

M&L for Rendering 15mm thick in cm 1:4 on fair faces of brick work finished even and fair without using extra cement complete all as specified.

M&L for Rendering 15mm thick in cm 1:4 on fair faces of brick work finished even and smooth without using extra cement complete all as specified.

Extra for forming fair finished channel or drain 30cm girth (inner girth) in cement concrete using extra cement incl forms, moulds, stopped end, etc.,

Add for addational 25mm inner girth or under girth 30cm all as specified.

One light point controlled by one, one way switch .

One Ceiling fan/ exhaust fan point controlled by one, one way switch.

One 3 pin socket outlet 5 Amps on the same board with other switches.

One 3 pin socket outlet 5 Amps on the Independent board.

All as per item No.142 here-in-before but with 2.5 Sqmm for 3 pin 15 Amps switch socket point on independent board along with one run of 2.5 Sqmm copper conductor green in colour as earth continuity conductor connected to earth dolly complete all as specified and as directed.

M&L for Switch Piano, flush type single pole, one way 5 Amps complete all as specified and directed.

M&L for Socket outlet, 2 in 1, 3 pin 5A flush type

M&L for Switch Socket combination, 2 in 1, 3 pin 6A flush type.

M&L for Switch Socket combination 2 in 1, 3 pin 5A/16A, 5 in 1 flush complete all as specified and directed.

M&L for stepped type electronic fan regulator 100/120 Watt socket size flush type on the existing phenolic laminated sheet etc.

M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body with PVC round/squareblock complete all as specified and directed.

M&L for sub main wiring with two runs of 4.0 Sq mm and one run of 4.0 Sq mm for earth wire with multi standard copper conductors of , 1100 volts grade, drawn through and including PVC double locked Casing & caping incl taking down old unsv complete all as specified and as directed.

M&L for 20W LED, 4', Wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver.etc with all accessories internally pre-wired and fixing the same and connecting up with flexible copper cable from ceiling rose to the light fitting complete incl taking down all as specified and as directed.

All as per item No 06 above but 10 watt LED 2', wall mounted with polycarbonate housing/batten.

Supply, fixing and testing in replacement of LED Bldg Security light fitting of capacity 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including 1.2 mtr GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling of holes as reqd and connecting up with flexible copper cable of size 0.75 sqmm 3 core from ceiling rose to the light fitting and all as specified and directed by Engineer-in-Charge.

Supply and fixing LED luminaire 600 mm x 600 mm, 40/42 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling and connecting up with driver, three core flexible copper conductor of suitable size complete all as specified and as directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and as directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and as directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. all as specified and directed.

S&F Stop valves, cast copper alloy, fancy type, chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all as per specified and as directed.

S&F 15mm bore Bib tap fancy type chromium plated with long shank complete all as specified and as directed

M&L for MCB Distribution board double door type SPN 8 way, sheet steel, powder coated, with bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity complete all as specified and as directed.

Supply and fixing MCB SPN 32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with onnection testing and commissioning complete all as specified and as directed.

Supply and fixing MCB SP 5- 32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with onnection testing and commissioning complete all as specified and as directed.

Supply & Fixing Energy efficient, Low Noise, Ceiling Fan, 1200mm Sweep of any colour as approved, 03 blades, BEE 5 Star Rated, with BLDC Motor, Copper Wound, 350 RPM, with Double Ball Bearing, Conforming to IS - 374, ISI Marked, suitable for operation on Single Phase, 240 Volts, AC, 50Hz, including Down Rod, Canopies, Shackles, Safety Rope, Hanging Clamps, Bushes, having P.F >0.95, Service Value >6.5, Air Delivery >215 CMM, Power Consumption less than 35 Watt, THD less than 5% including provision of Electronic speed control Regulator step type, including connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm and taking down existing ceiling fan of any description and depositing at MES Store Yard complete all as specified and as directed. Note: Ceiling Fan shall be provided with 03 Years onsite replacement warranty. Rate quoted is deemed to be including the same and nothing shall be paid extra on this account.

M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 16 sq mm, 2 core complete all as specified and as directed. NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items.

M&L for spread fine river sand in trenches complete all as specified ans as directed. NOTE: For measurement purpose, punned down thickness shall only be taken.

M&L for laying brick sub class 'B' old size burnt bricks for cable protection of size 230mmx115mmx75mm complete all as specified and as directed

Supply & laying tubes 'light grade' galvanised, with all fittings, fixed complete to walls, poles, ceilings or laid in floors/ trenches/ road crossing for protection of cables of size 40 mm dia bore complete all as specified and as directed.

Supply, install, test and commission out door type feeder pillar boxes 600mmx600mmx500mm (Bus bar chamber) with aluminium bus bar 400 amps - 04 Nos fixed over epoxy insulators and outer shell made out of 3.15 mm thick MS sheet supported with MS angle section 50x50x6 mm mounted on PCC 1:2:4 type B-1 platform 90 cm above and 45 cm below the ground level, frame factory fabricated with front openable single door (door hinged with body at 2 places with hinges ) lockable/open able by Keys having chromium plated 19 mm dia fancy lock, “U” type gasket shall be used to make the outer shell completely vermin proof suitable for 3 phase 4 wire 415 Volt, 50 Hz, tested at factory approved from CPRI for 35 MVA rupturing capacity at 415 Volts factory fabricated having modern fabrication and testing process followed by powder coat painting having thickness not less than 100 microns provided with suitable gasket to make it dust/vermin proof and general construction confirming to IS:8623/93, all as specified.

M & L for earthing complete with galvanized steel earth plate 60cm x 60cm x 6mm thick electrode, burried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to GI strip 25 x 4mm size up to test point by means of nuts, bolts, check nuts and washers of GI including excavation and earth work, PCC (1:3:6) type C-1 pit, 20mm bore dia GI pipe, medium grade pipe for watering arrangement and 40 mm bore dia GI pipe, light grade for protection of earth strip, 50mm thick RCC nominal mix (1:2:4) type B-1 cover reinforced with 8mm dia TMT bars @ 15cm C/C both ways and with handle made out of 10mm dia bars, funnel, wire mesh etc. as shown in electrical Plate No. 03 of SSR Part-I connected to earthing test point including taking down old unserviceable material and testing on completion etc complete all as specified and as directed.

M&L for earthing complete with galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4 mm dia as earth lead connectd by means of bolts, nuts, washers and check nuts all as shown in electrical plate No 3 of MES SSR Part-I, including testing on completion complete all as specified and as directed. (i) The unit rate shall also included for earth work in hard/ dense soil, PCC (1:3:6) type C1 with 10mm thick CI cover plate hinged to angle iron frame of suitable size, funnel with GI watering pipe 20mm dia Medium grade, GI protection pipe light grade 15mm dia and wire mesh complete in addition to item No 1 (a) to (e) of preamble (notes) under sub heading earthing, specified on Sl Page No 441 of MES SSR Part-II. (ii) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately.

Please Enable Macros to View BoQ information