15th FC Untied Grant 2022-2023

Amount

Conducting Geophysical survey including conveyance of survey instrument and other labor charges.

Drilling of Bore well of size 6" to 8" mm dia up to recommended depth using hard rocking including Transportation charges.

Towards Cost & Supply of 150 mm dia PVC Plain casing pipe including all cost & Conveyance of al materials and labour charges etc., Complete.

Brick work in Cement Motor 1:5 using country bricks of size 8 3/4x 41/4x 21/4 including cost and conveyance of all materials to site from approved sources including cost of cement which will be supplied by the contractor own cost of stipulated under special condition, including the conveyance of cement from the departmental saction stores to work site and bandling charges for the same at both ends including labour charges for mixing cement mortor including safolding charges extra labour for working in heights and watering and curing with all leads for good soft potable water and including all other incidental charges etc.complete complying with standard specifications.

Plastering with C.M 1:5 - 12 mm thick including cost and conveyance of all materials to site and all labors charges etc., complete.

Painting the new walls two coats over one coat of priming with best Cement paint of approved colour and quality including preparation of surface and finishing neatly etc., complete complying with standard specification and as directed by the department officers

Supply and delevery of 50 LPM X 100m submersible motor with pump set including all lab our charges etc., complete.,

Supply and delivery of 2 HP three phase panel board with automatic including cost & conveyance of all materials to site and all labor charges etc,. complete.

Supply and delivery finishing of HDPE Hose per IS 1984/2016 P.N.8 1996 including loading, unloading transportation and labor charges for finishing of G.I pipe and specials for pi[e connection works including charges as directed by department., Pg.No.21

Supply and delivery of submersible Coper 2.5 Sqmm wire cable PVC Insulated and PVC sheated 3 core flat type including etc., complete., IS No.694/1990 Pg.No.107

Supply and delivery of MS kiosk of size 0.75mx0.45mx0.75m made up of MS angle of size 50mmx50mmx3mm around covered with 18 gauge MS sheet and kiosk door made up of MS plates of size 25mmx3mm including, locking arrangements and labor charges etc., complete

Supply and eraction of motor pump set with pipes and transport charges rethreading, motor fittings and all labor charges etc., complete.,

Supply fun off 4 to 6 sq mm ploythene insulator and sheathed (Heavy Duty) service meter Aluminum cable of 1100 grade on bearer wire for service connection main (SI 68)

Earthing as per PWD standard with an earth electrode of 2 m B class Pipe dia not less than 32mm complete with nesessary masonry work.(SD No. 228)

Supply and Fixing of Panel Board with L angle Board 2' X 1 1/2' Sizeincluding cost and conveyance of all meterials to site and all other labour charges and incidential charges curing charges as per standard specification etc., Complete.

Supplying and delivery of 32mm GI Pipe including cost and conveyance of all labour charges amd complete.

Supplying and delivery of 32mm PVC Pipe including cost and conveyance of all labour charges amd complete.

Earthwork excavating and depositing on bank with an initial lead of 10m & initial lift of 2m in hard stiff clay, stiff black cotton, hard red earth shales, muram, graverl stoney earth & earth mixed with small size boulders & hard gravelly soil as per S.S 20B as Per Standard Specification.

Plain Cement Concrete 1:4:8 Mix (one part cement, Four part sand and Eight part of aggrigate) using 40mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.as Per Standard Specification.

Supplying and erecting centering for sides and soffits including supports and strutting upto 3.00m height for plane surface such as RCC Slab, Rectangular Beams, Tee (or) ELL Beams, Lintel Bed Block, Slabs, Landing Slabs, Beams Canopy, Side Slab (or) Square (or) Round columns etc., as detailed below with all cross branching using M.S. Sheets of size 80cm x 60cm and B.G. 10 stiffended with welded M.S. Angles of size 25 x 25 x 3mm for boarding laid over silver oak or country wood joints of 10cm to 30cm to dia spaced at 75cm c/c etc., complete complying with standard specifications as directed by departmental officers etc., complete.as Per Standard Specification.

Plain Cement Concrete 1:2:4 (One Cement, Two sand and four broken stone jelly) using 20mm size hard broken stone jelly for dummy columns, excluding cost of centering shuttering reinforcement grills and fabrication charges but including curing etc. complete.

Supplying fabricating and placing in position of steel rods using TMT. or Ribbed Tor Steel including cost of binding wire, cost of labour charges for fabrication and placing in position etc. Complete. Complying with std. specifications.

Reinforced Cement Concrete 1:1½:3 Mix (One part cement, one and half part sand and three part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc. Complete with std. Specifications.

Finishing the top of flooring with granolethic floor finish in cement concrete 1:2:4 mix using 10-12mm ISS metal to 25mm thick including cost and conveyance of all materials to site and all labour charges for mixing, laying, curing etc complete

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling with MS accessories with MS switch box in flush with wall with 5A FT switch with 3mm thick hylem sheet cover MS switch box with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion for concealed light point / fan point (for electronic regulator)

Thiruvengadam Ramalingam Suresh