Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.9 LAccepted-AOC BLDG 9 FLAT 130 MIRA CO OP HOUSING SOCIETY LTD SALISBURY PARK GULTEKDI PUNE 411037 | PUNE | PUNE | MAHARASHTRA | 411037 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹27.5 L+₹22,504 (0.82%)Rejected-Finance HOUSE NO 206 GAIKWAD ALI NEAR DATTA CHOWK MUNDHWA PUNE 411036 | PUNE | MAHARASHTRA | 411036 | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹29.7 L+₹2.4 L (8.77%)Rejected-Finance 54 10 SHANTI NAGAR NEAR SHINDE CHATRI WANAVADI PUNE 411040 | PUNE | MAHARASHTRA | 411040 | L3 | Rejected-Finance Not Lowest |
Tender Value
₹37.6 L
EMD Value
₹75,220
Closing Date
28 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH PUNE
Garrison Engineer North General Cariappa Marg Camp Pune 411001
GE (N) P/TOKEN- 55 OF 2023-2024 SPL REP TO BLDG NO 1 AT 1 ASHOKA MARG, PUNE CAMP, SPL REP TO EXTERNAL ELECTRIC SUPPLY NEAR BLDG NO 25 QUEENS GARDEN AND MW WORKS IN THE AREA OF AGE B/R (EAST) UNDER GE (NORTH) PUNE
2023_MES_611757_1
GE (N) P/TOKEN- 55 OF 2023-2024
Open Tender
Civil Works
Item Rate
240 days
GE NORTH PUNE
Refer tender documents.
8 documents required · 8 mandatory
₹500
GE NORTH PUNE
₹75,220
Yes
6 Oct 2023
2 Aug 2023
2 Sept 2023
2 Aug 2023
28 Aug 2023
16 Aug 2023
3 Aug 2023 - 9 Aug 2023
Amount
Taking down plaster on brick or stone wall, ceiling etc incl racking out joints hacking for keys scrubbing down with water etc complete all as specified and as directed
M&L for Rendering 10 mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement, complete all as specified and as directed
M&L for 15 mm thick cement plaster in CM 1:4 on brick or concrete surfaces finishing the surfaces even and smooth without using extra cement complete all as specified and as directed. (Note rate of scaffolding upto height 15 mtr shall be included in quoted rate of this item)
M&L for complete removal of existing finish/treatment on interior/ exterior wall surfaces, preparing surface and make surface free from loose particles, oil stains etc complete all as specified and as directed.
M&L for Priming surfaces with exterior /interior alkali resistant and anti sealer property diluted with water priming paint on wall complete all as specified and as directed
M&L for preparing new wall surfaces and applying two coats of 100% weather proof acrylic exterior emulsion paint complete all as specified and as directed.
M&L for two coats of 100% weather proof acrylic exterior emulsion paint complete all as specified and as directed
M&L for Priming surfaces with chalk whiting primer coat on walls complete all as specified and as directed
Material and labour for applying white cement base wall care fine putty average thickness 1.5mm complete all as specified and as directed by Engineer-in-Charge.
M&L for preparing new wall surfaces and applying two coats OBD complete all as specified and as directed.
M&L and applying two coats OBD complete all as specified and as directed.
Dismantling of eaves/ boarding any description and in any position fixed with nails complete all as specified and as directed
M&L for 2nd class softwood palin fillets, squar/rectangular in section, clean sawn, secured with nails or brads sec exc 13 sqcm but n exc 25 sqcm complete all as specified and directed.
M&L for 18 mm thick one side veneered decorative plywood, grade 1 (with BWR resin) fixed with screws to timber frame work complete all as specified and directed
Material and labour for malamine polish on wooden surface of any description, width or girth including cleaning and preparing the surfaces with a coat of wood filler and applying two or more coats till the desired finish is obtained complete all as specified and as directed.
Demolition of stone slabs and tiles laid dry or laid dry and pointed of any description or thickness in floors, aprons etc complete all as specified and as directed
M&L for 50 mm thick PCC type B-1, 1:2:4 (using 20mm graded stone aggregate) laid in flooring as levelling coat under tiles complete all as specified and directed.
M&L light shade coloured vitrified Ceramic tiles 8 to 10 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles incl 15 mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed
M&L Bees-wax polishing on old marble surfaces of any description, width or girth including cleaning complete all as specified and as directed
M&L for applying white cement base wall care fine putty average thickness 1.5mm complete all as specified and as directed by Engineer-in-Charge.
M&L for applying two coats of plastic emulsion paint complete all as specified and as directed.
M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and as directed
M&L for 50 mm thick PCC type B-1, 1:2:4 (using 20mm graded stone aggregate) laid in flooring as levelling coat under tiles complete all as specified and directed.
M&L doublecharged dark shade coloured vitrified Ceramic tiles 8 to 10 mm thick (square/rectangular) polished area of each tile exc. 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles incl 15 mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed
Excavation in Trenches not exc 1.50 Metre wide and not exc 1.50 Metre depth for laying of UG Cable/ foundation of Pole / Stays / Pipe etc getting out in soft loose soil, complete all as specified and as directed.
Returning, Filling in including Spreading, Leveling, Watering and Well ramming in layers not exc. 25 Cm thick in Soils, complete all as specified and as directed.
Removing Surplus soils to a distance not exc 50.00 Metre away and depositing where directed at a level not exc 1.50 Metre above the Starting Point, complete all as specified and as directed.
Taking down/out unserviceable UG Cables of any Cross Sectional Area and connections and joints including pipes, bricks, etc of any description laying in trenches or fixing with walls / poles, segreating serviceable Bricks/Precast covers, pipes, cables etc, and keep in safe custody for reuse, complete all as specified and as directed. NOTE : Earthwork will be measured and paid under appropriate Items.
Supply and laying Cable fit ( Double wall corrugated) as per IS16205 PART 24 Pipes Size 50 mm laid in trenches along with accessories such as coupler and bend, with rubber O ring for electrical applications as in cable protection pipe complete all as specified and as directed.
Supply & laying LT Power Cables, Aluminum stranded Conductor, XLPE Insulated, Cores Laid Up, PVC Innersheathed, Armoured, galvanised steel strip, Extruded PVC Type ST2 Outer Sheathed, 1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments, cross-sectional area 10 Sqmm 4 core, laid in trenches / on surface of wall / along with Pole in and passing through cable protection corrugated pipe & connecting to OH Lines or switch fuse unit and testing, complete all as specified and as directed
S & F Energy saving new generation environmental friendly long life versatile LED street light in aluminium pressure die cast housing with toughened glass cover (IP66 rating) with high power LEDs as light source and electronic driver of capacity 60 watts, pre wired, necessary mounting arrangements including GI medium grade bracket 40 mm dia and provision of 1.5 Sqmm twin core copper conductor cable multi stranded from fitting and other end connected to tapping point of length required complete all as specified and as directed fitting Make Orient Cat No- LSFS-060-C, Philips, Syska
S & F Energy saving new generation environmental friendly long life versatile LED flood light in aluminium pressure die cast housing with toughened glass cover (IP66 rating) with high power LEDs as light source warm white and electronic driver of capacity 100 watts, pre wired, necessary mounting arrangements including provision of 1.5 Sqmm twin core copper conductor cable multi stranded from fitting and other end connected to tapping point of length required complete all as specified and as directed fitting Make Havells Cat Part No JETAALBAFLOODLIGHT100W or equivalent in Philips
M&L for PCC (1:3:6) type C-1 using 20mm graded stone agg as in coping on top of wall and the like including weathering, slightly rounded or chamfered angles and throating as directed by Engr-in-Charge including use of necessary form work complete all as specified and as directed
M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundations filling and mass concrete complete all as specified and as directed
Supply and errecting in true vertical position steel tubular swaged pole 9 mtr long with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP-31, including painting with anti corrosive black bituminous paint internally complete and externally up to planting depth with and externally exposed portion with Aluminium paint twin coat over a coat of red oxide primer upto 1.5 mtr above ground level all as required at site or directed by Engr-in-charge. Note: Excavation and earth work, PCC for foundation and coping shall be measured paid seperately under respective item of this schedule.
Supply and fix FRP junction box light weight suitable for pole mounting including MCB SP 6 Amps single pole and necasry connector for loop in loop out cable connection and suitable size glands of size 250 x200x100mm Make: Sintex
Material and labour for point wiring using approved colour coding as per IS ,with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade ISI-694 marked drawn through in and including heavy duty PVC concealed conduit including all accessories, Metal flush box of suitable module, with earth dolly, covered with twin colour (specified by Engr-in- Charge)modular white cover plate & frame after chasing in Brick/stone masonry walls etc for accomodating modular switches, sockets, regulators etc including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed for the following
One light / wall / exhaust fan point controlled by one, one way switch 6 Amps complete all as specified and as directed
One ceiling fan point controlled by one, one way switch 6 Amps and regulator Note : PVC Casing caping / Pipe of size as required at site on surface of ceiling (only for fan point) in lieu of concealed is permitted and is deemed to be included in the unit rate quoated.
One bell point controlled by one, one way switch 6 Amps complete all as specified and as directed
One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on same board complete all as specified and as directed
One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on independent board complete all as specified and as directed
- Ditto- all as per 37 here-in before but using 2.5 Sqmm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 Volts grade for one 6 pin socket outlet plug point,16 Amps independent including necessary running of 2.5 Sqmm PVC insulated multistranded copper conductor single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed
Supply and fixing Modular Switch - 6 Amps, Single pole one way, one module complete all as specified and as directed.
Supply and fixing Modular Bell push - 6 Amps, Single pole one way, one module complete all as specified and as directed.
Supply and fixing Modular Switch - 16 Amps, Single pole one way, one module complete all as specified and as directed.
S & F Modular socket outlet multipurpose 6 Amps, 5 pin, 2 module, complete all as specified and as directed.
S & F Modular socket outlet multipurpose 16 Amps, 6 pin-shuttered type, 2 module, complete all as specified and as directed.
Supply and fixing, Ding Dong bell suitable for operation on AC. 230 volts, single pole complete all as specified and as directed.
Supply and fixing modular fan step regulator, 120W - 2 module suitable for ( 48" & 56" fans) supply complete all as specified and as directed.
S & F Ceiling rose, 3 phase / PVC / polycarbonate, complete all as specified and as directed
Supply and fixing 20/22 Watt Inverter LED Battenaluminium body with Opal Diffuser, IP20, Battery back-up & Functioning as per Product TDS with intregrated electronic driver, connector block, holder, decorative end caps, LED tube light etc complete with all accessories prewired and mounting PVC rectangular block, including provision of flexible copper conductor cable of suitable size from ceiling rose to connector and taking down old unserviceable fitting from existing postion for carrying to store, making good disturbed surfaces complete all as specified and as directed. Make Halonix Cat No LED INVERTER BATTEN HLB-08-22-CW-INV or equivalent in Havells, LHEXACP7FNIW020
S & F for LED down light recess mounted luminare, round/square type 15 watts white/warm white as per site requirement with efficiency of 1500 lumens per watt, Series of downlighters with low depth round & larger dia, powder coated white finish with drop down PC diffuser to deliver low glare illumination with optimized heat sink for efficient heat dissipation and separate replaceable electronic driver suitable for office spaces sleek design white finish operating voltage 150 V-270 V AC, 50 Hz all as specified. Make- JAQUAR Cat part No. LNEP01S015XN/LLCN01R01SXN, Halonix HLDLR31-15CW/ HLDLR-S27-15-CW,Philips DN296B LED 15S-6500 PSU WH.
S & F for LED spot light suitable for operation on 230 volt 50 Hz AC supply Recess-mounted, COB-based, round xed LED downlight with 60 beam angle 08/09 watts or above including driver as per sample including removal of old unserviceable one complete all as specified and as directed. Make Halonix Cat No. HLDLR-31-09-CW, Havells LHEBMKPFIHIW008, Driver LSSCRX1252, Jaquar LETSO1R010XC.
S & F for wall mounted LED 06 watts (WW) or more, 3000K with good color rendering (CRI>70) picture light fitting, 230 volts with durable aluminium housing and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, including taking down old unsv fitting complete all as specified and as directed. Make :-Philips model No. 30973 or Luker I-3, LIMR6 or Halonix
S & F Vertical TPN Distribution Board in sheet metal enclosure double door 4 Way, 415 volts, 50 Hz, suitable for Flush Mounting and surface Mounting & provision for FP MCCB as incomer up to 125 Amps as I/C ( Frame1) and SP/TP MCB's as outgoing (Modules Optium F1+12) , With -100 Amps Copper insulated Busbar assembly for each phase, isolated Neutral bar, 2 Earthbar and Cable ties for cable management, IP 43 - #IK 09 with metal door including necessary cement work and electrical connections complete all as specified and as directed.
Supplied and fixed Four pole MCCB, Thermal Release Range 63-100 Amps, rupturing Breaking Capacity Icu at 415V AC 50Hz. 30 (kA) complete all as specified and as directed
Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP 5 To 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.
Taking down of old unserviceable sub main wiring of any type complete all as specified and as directed.
S & F submain wiring with 2 single core (FRLS) PVC insulated unsheathed multistranded flexible copper conductor cable, of 6.0 Sqmm and one single core 6.0 Sqmm flame retardent low smoke (FRLS) PVC insulated, unsheathed, multistranded, flexible copper cable as earthing lead , all as per IS 694/1990 drawn through including concealed in stone masonary PVC conduit and conduit accessories heavy duty ISI marked, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed all as specified and as directed complete all as specified and as directed.. Note :- ( Two runs of main copper wire, one run of earth wire cable & PVC conduit shall be measured together as one length).
S & F submain wiring with 2 single core (FRLS) PVC insulated unsheathed multistranded flexible copper conductor cable, of 4.0 Sqmm and one single core 4.0 Sqmm flame retardent low smoke (FRLS) PVC insulated, unsheathed, multistranded, flexible copper cable as earthing lead , all as per IS 694/1990 drawn through including concealed in stone masonary PVC conduit and conduit accessories heavy duty ISI marked, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed all as specified and as directed complete all as specified and as directed. Note :- ( Two runs of main copper wire, one run of earth wire cable & PVC conduit shall be measured together as one length).
S & F PVC rigid non-metallic flexible conduit ISI marked of dia 25 mm dia inclusive of all tees, bends, elbows reducers, junction box etc and fixing accessories such as couplers, lock nuts, saddles, etc for telephone cable , TV cable and public address system including where required all as directed by Engineer-in- Charge duly concealed in wall complete all as specified and as directed
S & F PVC rigid non-metallic flexible conduit ISI marked of dia 20 mm dia inclusive of all tees, bends, elbows reducers, junction box etc and fixing accessories such as couplers, lock nuts, saddles, etc for telephone cable , TV cable and public address system including where required all as directed by Engineer-in- Charge duly concealed in wall complete all as specified and as directed
Supply and Fix in replacement for FRLSH single core cable PVC insulated and unsheathed multistranded copper conductor of following size as per IS 694 for wiring including ISI marked conduit including removal old existing unserviceable one complete all as specified and directed.Make:Anchor,Havells,Finolex
(a) 1.5 Sq mm
(b) 2.5 Sq mm
S & F for PVC surface modular box with modular plates inner and outer with frame each terminal including necessary fixing arrangement of following module including removal of old unserviceable one complete all as specified and as directed. 12 module
Surface excavation not exc 30 cm deep and averaging 15cm deep and getting out in soft / loose soil complete all as specified and as directed
Demolition of brick work / stone masonry / block masonry built in built in cement mortar or cement lime mortar complete all as specified and as directed
Demolition of cement concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and as directed
Excavation in trenches not exc. 1.5m wide and not exc. 1.5m deep for foundation etc. not exc 10 Sqm on plan getting out as in hard / dense soil complete all as specified and as directed
M&L for PCC (1:4:8) type D2 (using 40 mm graded stone aggregates) as in foundation filling and mass concrete complete all as specified and as directed
Filling under floors with moorum laid in layers n. exc 15 cm thick spread levelled and rammed watering and compacted complete all as specified and as directed
M&L for hard core of gauge n.exc.63mm hand broken stone deposited,spread and levelled in layer n exc.15cm thick watering and rammed to a true surface complete all as specified and as directed
Form work to side of concrete in fdns, footing base, base of columns, side and soffits of plinth beam and simillar work complete all as specified and as directed
Form work to side of columns complete all as specified and as directed
M/L for TMT bars 10 mm dia and over cut to length ,bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed
.-do- but for 5 mm dia and over upto and including 8 mm dia as in stirrups, spacer and binders complete all as specified and directed
M& L for RCC (nominal mix),type B1 1:2:4 (using 20 mm graded aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified and as directed
M& L for RCC (Nominal Mix) Type B1, 1:2:4 (using 20 mm graded aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed.
M&L old size brick fly ash bricks straight or curved on exc 6M mean radius built in CM 1:6 complete all as specified and as directed
M&L for rendering 15 mm thick in cement mortar 1:4, on fair faces of brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed
M&L Granite (of any type), 18- 20mm thick (table rubbed and polished) in wallcladding and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixer of pigment to match with marble shade including making full curving the edges complete all as specified and as directed
Supply and fix for rolled mild steel frame work as in grills, doors or gates of angle or other sectioin with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and incl either hooks and hinges or steel hanging door fittings also fastenings and fixing etc. conforming Fe 410-W(Gde-E-250) quality -B complete all as specified and as directed.
S&F 1mm thick Plain, black mild steel sheeting fixed in gate complete all as specified and as directed.
M/L 2 coats of synthetic enamel paint over a coat primer on newly steel surface including preparation complete all as specified and directed.
M&L preparation of old steel surface exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed
M&L for two coats of cement paint over a coat of primer on newly plastered surfaces of external walls including preparations of new surfaces complete all as specified and directed
M&L for 100mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregates) as in sub base complete all as specified and as directed
Material and labour for glossy machine pressed precast cement concrete coloured interlocking tiles, paver block, any shape and size as approved, 60mm thick, conforming to IS 15658-2006, M-35 grade in floor/ pavement laid over and including 30mm thick sand cushioning laid dry to the profile including vibrating with surface vibrator after laying of tiles complete all as specified and as directed. NOTE : (i) Manufacturers test certificate for crushing strength and Water absorption shall be submitted alongwith sample.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cms in soil complete all as specified and as directed
Removal of surplus soil not exceeding 1.50 Km and depositing where complete all as specified and as directed
S&F 40mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc complete all as specified and as directed
Excavation in trenches not exc 1.50 Metre wide and not exc 1.50 Metre depth for laying of UG Cable/Pole/Stays etc getting out in Soft/Loose Soil, complete all as specified and as directed.
Returning, Filling in including Spreading, Leveling, Watering and Well Ramming in layers not exc. 25 Cm thick in Soils, complete all as specified and as directed.
Removing Surplus soil to a distance not exc 50.00 Metre away and depositing where directed at a level not exc 1.50 Metre above the Starting Point, complete all as specified and as directed.
Supply and laying 40mm outer dia, double walled corrugated (DWC) HDPE duct pipe conforming to IS- 14930 Pt-II with antirodent and non flame propogating properties plete with fittings for cable protection complete all as specified and as directed.
Supply, lay, joint, test and commissioning of LT under ground cable 1100 volt grade , XLPE insulated and PVC sheathed heavy duty armoured with aluminium conductor , IS 7098-I Marked, Laid in trenches/ducts/fixed on poles/walls/laid under roads/paths/drains/culverts or encased in GI pipe including cable glands, lugs jointing material etc complete all as specified and directed. cable of the following size. 10 Sq mm 2 Core
S & F for sheet metal enclosure MCB DB SPN 4 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. Make - Schneider/Legrand/L&T/ABB.
S & F for MCB Single pole and neutral rated capacity 5 to 40 A, 240 volts breaking capacity 10 KA complete all as specified and as directed. Make - Schneider/Legrand/L&T/ ABB.
S & F for MCB Single pole rated capacity 6 to 40 A, 240 volts breaking capacity 10 KA complete all as specified and as directed. Make - Schneider/Legrand/L&T/ABB.
S & F for LED post top lantern 70 watt or above light fitting made of cast aluminium spigot housing with decarative opal polycarbonate diffuser with IP 65 protection white / warm white as per site requirement complete with all accessories fixed on GI pipe 50 mm dia complete all as specified and directed. Make Halonix cat No. BGCL 70 W LED WH of Bajaj or equivalent in jaquar or halonix or Shakti (clear glass).
Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.
AJINKYA VIKRAM GAIKWAD
M/s.BAJRANG CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .