Supply, Installation, Testing and Commissioning of new 10 Nos. Water Pumps along with motors, wiring, electrical starter panels and complete foundation including the suction line at various locations at MPA

Amount

SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF 3 NOS. 40HP PUMP, MOTORS AND DISTRIBUTION PANEL AT OLD POWER HOUSE

Supply of 40 HP pumps as per the required discharge and head mentioned at Annexure-A (as per technical specifications).

Supply of 40HP pump motors (as per technical specifications)

Supply of 250A, 4 pole MCCB with Powder coated MS enclosure (as per technical specifications).

Supply with Powder coated 125 Amps 4 pole MCCB along with MS sheet enclosure/box (as per technical specifications).

Supply of fully enclosed Distribution box with copper bus bar (as per technical specifications).

Supply of star delta starter panels for 40HP pump motors (as per technical specifications).

Supply and fixing of cement backer board of thickness 20mm and of suitable size for mounting MCCB’S, Distribution BOX, starter as detailed above. The cement backer board shall be mounted on the wall with proper GI frame. (as per technical specifications).

Installation of 3 no star delta starter, Distribution box, 01 no. 250A MCCB with enclosure box and 04 nos., 125 Amps, 4-pole MCCB along with enclosure on cement backer board

Supply and laying of 4C x 70 sq.mm. Copper cable along with necessary glands and lugs for connecting 250 A MCCB output to distribution box

Supply and laying of 4C x 35 sq.mm. flexible Copper cable along with necessary glands and lugs from distribution box connecting to 4 nos. 125 A MCCB

Supply and laying of 3C x 35 sq.mm. flexible Copper cable along with necessary glands and lugs from individual MCCB to starter panel

Supply and laying of 3C x 35 sq.mm armored copper cable along with necessary glands and lugs from starter panel to motor. ( 2 runs)

Providing GI pipe Earthing (as per technical specifications).

Supply and installation of GI Flats of size 25x5mm using GI bolts and nuts for Earthing connection along with insulating Sleeve. (as per technical specifications).

Installation including civil works, testing and commissioning of pump at old power house

SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF 2 NOS. 30HP PUMP, MOTORS AND DISTRIBUTION PANEL AT JETTY WELL

Supply of 30HP pumps as per the required discharge and head mentioned at Annexure-A (as per technical specifications).

Supply of 30HP pump motors (as per technical specifications)..

Supply of 200A, 4 pole MCCB with Powder coated MS enclosure. (as per technical specifications).

Supply of 100 Amps 4 pole MCCB along with powder coated MS sheet enclosure (as per technical specifications).

Supply of fully enclosed Distribution box with copper bus bar (as per technical specifications).

Supply of star delta starter panels for 30HP pump motors (as per technical specifications).

Supply and fixing of cement backer board of thickness 20mm and of suitable size for mounting MCCBS, Distribution BOX, and starter as detailed above. The cement backer board shall be mounted on the wall with proper GI frame. (as per technical specifications).

Installation of 2 no star delta starter, Distribution box, 01 no. 200A MCCB with enclosure box and 03 nos., 100 Amps, 4-pole MCCB along on cement backer board.

Supply and laying of 4C x 50 sq.mm. Copper cable along with necessary glands and lugs for connecting 200 A MCCB output to distribution box

Supply and laying of 4C x 25 sq.mm. flexible Copper cable along with necessary glands and lugs from distribution box connecting to 4 nos. 100 Amps MCCB

Supply and laying of 3C x 25 sq.mm. flexible Copper cable along with necessary glands and lugs from individual MCCB to starter panel

Supply and laying of 3C x 25 sq.mm armored copper cable along with necessary glands and lugs from starter panel to motor( 2 runs)

Providing GI pipe Earthing (as per technical specifications).

Supply and installation of GI Flats of size 25x5mm using GI bolts and nuts for Earthing connection along with insulating Sleeve. (as per technical specifications).

Installation including civil works, testing and commissioning of pump at Jetty well

SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF 2 NOS. 20HP MONOBLOCK PUMP MOTORS OF OVER HEAD TANK BEHIND DEEPVIHAR HIGHER SECONDARY SCHOOL

Supply of 20HP monoblock pump motors for overhead tank (as per technical specifications).

Supply of star delta starter panels for pump motors at overhead tank (as per technical specifications).

Installation, testing and commissioning of star delta starter panels for pump motors at overhead tank (as per technical specifications).

Supply and installation of 3 pole MCCB of rating 200A along with SS enclosure. (as per technical specifications).

Supply and installation of 3 pole MCCB of rating 63A along with powder coated MS enclosure. (as per technical specifications).

Supply and installation of powder coated MS enclosure busbar junction box of size 0.4m x 0.3m and depth 0.15m (as per technical specifications).

Supply and installation of copper busbar strip of size 25 x 5 mm and of length 0.3m each (as per technical specifications).

Supply, Fabrication and mounting of base frame along with cement backer board 20mm thick to mount starter panels and MCCBs. (as per technical specifications).

Supply and laying of 4C x 50 sq.mm. Copper cable along with necessary glands and lugs. (as per technical specification)

Supply and laying of 4C x 35 sq.mm. Copper cable along with necessary glands and lugs. (as per technical specification)

Providing GI pipe Earthing (as per technical specifications).

Supply and installation of GI Flats of size 25x5mm using GI bolts and nuts for Earthing connection along with insulating Sleeve. (as per technical specifications).

Installation including civil works, testing and commissioning of pump at overhead Reservoir at headland

SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF 2 NOS. 20HP MONOBLOCK PUMP MOTORS OF UNDERGROUND TANK BEHIND DEEPVIHAR HIGHER SECONDARY SCHOOL

Supply of 20HP monoblock pump motors for underground tank (as per technical specifications).

Supply of star delta starter panels for pump motors at underground tank (as per technical specifications).

Installation, testing and commissioning of star delta starter panels for pump motors at underground tank (as per technical specifications).

Supply and laying of 4C x 35 sq.mm. Copper cable along with necessary glands and lugs. (as per technical specification).

Providing GI pipe Earthing (as per technical specifications).

Supply and installation of GI Flats of size 25x5mm using GI bolts and nuts for Earthing connection along with insulating Sleeve. (as per technical specifications).

Installation including civil works, testing and commissioning of pump at underground Reservoir at Headland.

SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF 1 NO. 60 HP PUMP, MOTORS OF MM COMPLEX AT BAINA

Supply of 60HP pump as per the required discharge and head mentioned at Annexure-A (as per technical specifications).

Supply of 60HP pump motors (as per technical specifications).

Installation including Civil works, testing and commissioning of 60 HP pump at MM Complex (as per technical specifications).

Supply and laying of 3C x 50 sq.mm, 1.1kV, Copper cable along with necessary glands and lugs. (as per technical specification).

Note: a. The subject work is on turnkey basis. b. The offered rates shall be exclusive of GST. c. Evaluation will be done on Basic Price. Total of price (1+2+3+4+5) in the Price Schedule (BOQ) shall be considered lowest among all Bidders.

NISARGA ENGINEERS