BARC(T)/NRB/INRPC/ELE-55/2024/ 914 date 06/05/2024

Amount

Design, Manufacturing, Supply, Installation and Testing of three phase 415V AC, 4 wire, Normal Power Distribution Panel (NPDP) with 2 Nos. 400A 4 pole Microprocessor based MCCB Incomer and 17 Nos. 4 pole Microprocessor based MCCB outgoing with 1 bus coupler in between, single door,PCC panel fabricated out of Pre-galvanised G. I Sheet steel with IP 54 degree of protection with switchgears, bus-bars,bus coupler, wiring, and terminals powder coated with approved shade, canopy and complete with foundation as per attached drawing and technical specifications required.(SLD Drg no:IP1/121B/05036140/DWG/001/R.)

Design, Manufacturing, Supply, Installation and Testing of three phase 415V AC, 4 wire,Emergency Power Distribution Panel (EPDP) with 2 Nos. 400A 4 pole Microprocessor based MCCB Incomer and 25 Nos. 4 pole Microprocessor based MCCB outgoing with 1 bus coupler in between, single door,PCC panel fabricated out of Pre-galvanised G. I Sheet steel with IP 54 degree of protection with switchgears, bus-bars,bus coupler, wiring, and terminals powder coated with approved shade, canopy and complete with foundation as per attached drawing and technical specifications required.(SLD Drg no:IP1/121B/05046140/DWG/001/R.0)

Design, Manufacturing, Supply, Installation and Testing of three phase 415V AC, 4 wire,Main Lighting Distribution Panel- Normal (MLDP-N) with 1 Nos. 125A 4 pole Microprocessor based MCCB Incomer and 11 Nos. TPN based MCCB outgoing, single door,PCC panel fabricated out of Pre-galvanised G. I Sheet steel with IP 54 degree of protection with switchgears, bus-bars, wiring, and terminals powder coated with approved shade, canopy and complete with foundation as per attached drawing and technical specifications required.(SLD no:IP1/121B/05037339/DWG/001/R-0)

Design, Manufacturing, Supply, Installation and Testing of three phase 415V AC, 4 wire,Main Lighting Distribution Panel- Emergency (MLDP-E) with 1 Nos. 160A 4 pole Microprocessor MCCB Incomer and 14 Nos. TPN based MCCB outgoing, single door,PCC panel fabricated out of Pre-galvanised G. I Sheet steel with IP 54 degree of protection with switchgears, bus-bars, wiring, and terminals powder coated with approved shade, canopy and complete with foundation as per attached drawing and technical specifications required.(SLD no:IP1/121B/05047339/DWG/001/R-0)

Design, Manufacturing, Supply, Installation and Testing of single phase 240V AC, 2 wire,UPS PDP-A with 1 Nos. 400A DP MCCB Incomer and 19 Nos. DP based MCCB outgoing, single door,PCC panel fabricated out of Pre-galvanised G. I Sheet steel with IP 54 degree of protection with switchgears, bus-bars, wiring, and terminals powder coated with approved shade, canopy and complete with foundation as per attached drawing and technical specifications required.(SLD no:IP1/121B/05057339/DWG/001/R-0)

Design, Manufacturing, Supply, Installation and Testing of single phase 240V AC, 2 wire,UPS PDP-B with 1 Nos. 400A DP MCCB Incomer and 19 Nos. DP based MCCB outgoing, single door,PCC panel fabricated out of Pre-galvanised G. I Sheet steel with IP 54 degree of protection with switchgears, bus-bars, wiring, and terminals powder coated with approved shade, canopy and complete with foundation as per attached drawing and technical specifications required.(SLD no:IP1/121B/05057339/DWG/002/R-0)

Supply, Installation, Testing and Commissioning of following configuration of following configuration 415V, 3-phase, 4 wire, double door,with R Y B Phase indication through glass front, IP-54, Prewired with HFFR copper wires, horizontal type, metallic Double Door, Phase Segregated three pole and neutral MCB Distribution Board fabricated out of 2 mm thick ,powder coated with RAL7035 shade , pre-galvanised G.I. sheet steel, suitable for surface mounting/ installation in existing enclosure complete with appropriate rating of tinned copper bus bar/ Cu wire, neutral bus bar, earth bar, din bar,brass neutral link, brass earthing studs, phase distribution drawing, danger board, name plate, 2 mm thick removable gland plate on both top and bottom side with required number of knock out holes , neoprene gasket, etc as as per drawing, specifications & generally as per relevant IS & as per instructions of Engineer-in-charge.

8 way having 1 no. main incomer of 16A TPN MCB, Isc=10kA, Type C with 1 no. of 16A, Isc=10kA, DP ELCB(100ma) and DP MCB as incomer for each phase and 24 nos. outgoing of 10A SPN MCB. suitable for 240V rating, Type "C" curve, 10 kA breaking capacity and as per tender technical specifications.

Supply

Installation, Testing and Commissioning

8 way having 1 no. main incomer of 40A TPN MCB, Isc=10kA, Type C with 1 no. of 40A, Isc=10kA, DP ELCB(100ma) and DP MCB as incomer for each phase and 24 nos. outgoing of 16A SPN MCB. suitable for 240V rating, Type "C" curve, 10 kA breaking capacity and as per tender technical specifications.

Supply

Installation, Testing and Commissioning

6 way having 1 no. main incomer of 16A TPN MCB, Isc=10kA, Type C with 1 no. 16A, Isc=10kA,DP ELCB(100ma) and DP MCB as incomer for each phase, 15 nos. outgoing of 6A SPN MCB and 3 nos. outgoing of 10A SPN MCB suitable for 240V rating, Type "C" curve, 10 kA breaking capacity and as per tender technical specifications.

Supply

Installation, Testing and Commissioning

6 way having 1 no. main incomer of 16A TPN MCB, Isc=10kA, Type C with 1 no. 16A, Isc=10kA, DP ELCB(100ma) and DP MCB as incomer for each phase, 18 nos. outgoing of 10A SPN MCB suitable for 240V rating, Type "C" curve, 10 kA breaking capacity and as per tender technical specifications.

Supply

Installation, Testing and Commissioning

6 way having 1 no. main incomer of 40A TPN MCB, Isc=10kA, Type C with 1 no. 40A, Isc=10kA, DP ELCB(100ma) and DP MCB as incomer for each phase, 18 nos. outgoing of 16A SPN MCB suitable for 240V rating, Type "C" curve, 10 kA breaking capacity and as per tender technical specifications.

Supply

Installation, Testing and Commissioning

6 way having 1 no. main incomer of 32A TPN MCB, Isc=10kA, Type C with 1 no. 32A, Isc=10kA,DP ELCB(100ma) and DP MCB as incomer for each phase, 18 nos. outgoing of 16A SPN MCB suitable for 240V rating, Type "C" curve, 10 kA breaking capacity and as per tender technical specifications.

Supply

Installation, Testing and Commissioning

6 way having 1 no. main incomer of 16A TPN MCB, Isc=10kA, Type C with 1 no. 16A, Isc=10kA,DP ELCB(100ma) and DP MCB as incomer for each phase, 18 nos. outgoing of 6A SPN MCB suitable for 240V rating, Type "C" curve, 10 kA breaking capacity and as per tender technical specifications.

Supply

Installation, Testing and Commissioning

4 way having 1 no. main incomer of 16A TPN MCB, Isc=10kA, Type C with 1 no. 16A, Isc=10kA, DP ELCB(100ma) and DP MCB as incomer for each phase, 12 nos. outgoing of 6A SPN MCB suitable for 240V rating, Type "C" curve, 10 kA breaking capacity and as per tender technical specifications.

Supply

Installation, Testing and Commissioning

Supply, Installation, Testing and Commissioning of following configuration 240V, 1-phase, 2 wire, with Phase indication through glass front, Prewired with HFFR copper wires, IP-54, MCB Distribution Board fabricated out of 2mm thick Pre Galvanised G. I sheet steel, powder coated with RAL7035 shade, suitable for surface mounting/installation in existing enclosure complete with appropriate rating of tinned copper bus bar, neutral bus bar ,brass neutral link, brass earthing studs, phase distribution drawing, danger board, name plate, earth bar, din bar for MCB mounting, 2 mm thick removable gland plate on both top and bottom side with required number of knock out holes, neoprene gasket, check-nuts etc. as required as per drawing, specifications & generally as per relevant IS & as per instructions of Engineer-in-charge.

16 way having 1 no. main incomer of 63A DP MCB, Isc=10kA, Type C and 16 nos. outgoing of 16A SPN MCB. suitable for 240V rating, Type "C" curve, 10 kA breaking capacity and as per tender technical specifications.

Supply

Installation, Testing and Commissioning

10 way having 1 no. main incomer of 32A DP MCB, Isc=10kA, Type C and 10 nos. outgoing of 16A SPN MCB. suitable for 240V rating, Type "C" curve, 10 kA breaking capacity and as per tender technical specifications.

Supply

Installation, Testing and Commissioning

8 way having 1 no. main incomer of 32A DP MCB, Isc=10kA, Type C and 8 nos. outgoing of 16A SPN MCB. suitable for 240V rating, Type "C" curve, 10 kA breaking capacity and as per tender technical specifications.

Supply

Installation, Testing and Commissioning

6 way having 1 no. main incomer of 32A DP MCB, Isc=10kA, Type C and 6 nos. outgoing of 16A SPN MCB. suitable for 240V rating, Type "C" curve, 10 kA breaking capacity and as per tender technical specifications.

Supply

Installation, Testing and Commissioning

4 way having 1 no. main incomer of 16A DP MCB, Isc=10kA, Type C and 4 nos. outgoing of 6A SPN MCB. suitable for 240V rating, Type "C" curve, 10 kA breaking capacity and as per tender technical specifications.

Supply

Installation, Testing and Commissioning

Supply and Installation of the following MCB and plug sockets with suitable plug tops ( 3-pin) in the exisitng recess mounted GI Box and 3 pin domestic plug sockets with suitable polycarbonate Box, face plate, switch and plug tops as per Technical specifications.

2 no. of 6A, Single phase Industrial Socket with Type C-Curve, Industrial type MCB, Isc=10kA, along with pre- powder coated GI sheet steel Face Plate, Industrial Plug Tops and suitable DIN rail and mounting arrangements as per technical specification.

Supply

Installation, Testing and Commissioning

1 no. of 6A and 1 no.of 16A, Single phase Industrial Socket with Type C-Curve, Industrial type MCB, Isc=10kA, along with pre- powder coated GI sheet steel Face Plate, Industrial Plug Tops and suitable DIN rail and mounting arrangements as per technical specification.

Supply

Installation, Testing and Commissioning

1 no. of 6A and 1 no.of 16A, Single phase Modular Decorative Type Socket with Polycarbonate box, Switch for each Socket and heavy duty polycarbonate Face Plate, plug tops and suitable mounting arrangements as per technical specification.

Supply

Installation, Testing and Commissioning

1 no. of 6A , Single phase Modular Decorative Type Socket with Polycarbonate box, Switch for each Socket and heavy duty polycarbonate Face Plate, plug tops and suitable mounting arrangements as per technical specification.

Supply

Installation, Testing and Commissioning

1 no.of 16A, Single phase Modular Decorative Type Socket with Polycarbonate box, Switch for each Socket and heavy duty polycarbonate Face Plate, plug tops and suitable mounting arrangements as per technical specification.

Supply

Installation, Testing and Commissioning

1 nos. of 6A, Single Pole, Modular type Decorative Switch with Polycarbonate box, heavy duty polycarbonate face plate and suitable mounting arrangements as per technical specification.

Supply

Installation, Testing and Commissioning

2 nos. of 6A, Single Pole, Modular type Decorative Switch with Polycarbonate box, heavy duty polycarbonate face plate and suitable mounting arrangements as per technical specification.

Supply

Installation, Testing and Commissioning

3 nos. of 6A, Single Pole, Modular type Decorative Switch with Polycarbonate box, heavy duty polycarbonate Face Plate and suitable mounting arrangements as per technical specification.

Supply

Installation, Testing and Commissioning

4 nos. of 6A, Single Pole, Modular type Decorative Switch with Polycarbonate box, heavy duty polycarbonate Face Plate and suitable mounting arrangements as per technical specification.

Supply

Installation, Testing and Commissioning

Supply & Installation of 12 Way modular domestic type Switch box with cover plate, 4 nos of switches of rating 6 Amp and 4 no of sockets ( 6/20 Amps ), suitable for surface mounting as per attached technical specification

Supply

Installation, Testing and Commissioning

Installation of 6 Way modular domestic type Switch box with cover plate, 2 nos of switches of rating 6 Amp and 2 no of sockets ( 6/20 Amps ), suitable for surface mounting as per attached technical specification.

Supply

Installation, Testing and Commissioning

Black painted Extruded aluminium housing single sided 8W LED signage exit light,Red LED’s mounted inside the housing,Laser engraved Signage matter on Single / Double Acrylic sheet fixed on one side along with Ni-Cd Battery back up to 2 hrs. (Charged up to 8 - 10 Hrs),Mounting strings provided for pendent mounting ,Operating Voltage 150-280V AC and Ingress protection – IP42

Supply

Installation, Testing and Commissioning

SITC of LED recess mount 2'x2' grid light complete with light fitting accessories, including supply of fixing SS accessories, flexible GI metallic conduit sleeves, PVC conduit bushes, Cu cable lugs, Recess/Surface mounted with a nominal system lumen output of 4200lumens and a minimum system efficacyof 120lm/W.The luminaire shall have a rated system lifetime of 50,000 burning hours at L70B50 @ 50k hrs. The luminaire should have a CCT of 5700K,Initial chromaticity <5 and CRI > 80.The luminaire shall meet IP20 rating with THD < 10% and PF > 0.9 and in-built surge protection of 4kV. The luminaire housing should made of High Pressure die cast Aluminium with wide beam optics and having gasket of heat proof siliconerubber ring. The total power consumption should not exceed 36W (including driver).

Supply

Installation, Testing and Commissioning

SITC of LED Surface mount Pheriphery light complete with light fitting accessories, including supply of fixing SS accessories, flexible GI metallic conduit sleeves, PVC conduit bushes, Cu cable lugs, Surface mounted with a nominal system lumen output of 4200 lumens and a minimum system efficacyof 120lm/W.The luminaire shall have a rated system lifetime of 50,000 burning hours at L70. The luminaire should have a CCT of 5700K, and CRI > 70.The luminaire shall meet IP66 rating with THD < 10% and PF > 0.95 and in-built surge protection of 4kV. The luminaire housing should made of High Pressure die cast Aluminium with wide beam optics and having gasket of heat proof siliconerubber ring. The total power consumption should not exceed 36W (including driver).

Supply

Installation, Testing and Commissioning

SITC of LED recess mount 2'x2' grid light complete with light fitting accessories, including supply of fixing SS accessories, flexible GI metallic conduit sleeves, PVC conduit bushes, Cu cable lugs, Recess mounted with a nominal system lumen output of 3600 lumens and a minimum system efficacyof 120lm/W.The luminaire shall have a rated system lifetime of 50,000 burning hours at L70B50 @ 50k hrs. The luminaire should have a CCT of 6500K,Initial chromaticity <5 and CRI > 80.The luminaire shall meet IP20 rating with THD < 10% and PF > 0.9 and in-built surge protection of 4kV. The luminaire housing should made of High Pressure die cast Aluminium with wide beam optics and having gasket of heat proof siliconerubber ring. The total power consumption should not exceed 30W (including driver).

Supply

Installation, Testing and Commissioning

SITC of LED recess mount light complete with light fitting accessories, including supply of fixing SS accessories, flexible GI metallic conduit sleeves, PVC conduit bushes, Cu cable lugs, Recess mounted with a nominal system lumen output of 1200 lumens and a minimum system efficacyof 110lm/W.The luminaire shall have a rated system lifetime of 50,000 burning hours at L70B50 @ 50k hrs. The luminaire should have a CCT of 6500K,Initial chromaticity <5 and CRI > 80.The luminaire shall meet IP20 rating with THD < 10% and PF > 0.9 and in-built surge protection of 2.5kV. The luminaire housing should made of High Pressure die cast Aluminium with wide beam optics and having gasket of heat proof siliconerubber ring. The total power consumption should not exceed 12W (including driver).

Supply

Installation, Testing and Commissioning

SITC of LED Surface mount light complete with light fitting accessories, including supply of fixing SS accessories, flexible GI metallic conduit sleeves, PVC conduit bushes, Cu cable lugs, Surface mounted with a nominal system lumen output of 1500 lumens and a minimum system efficacyof 110lm/W.The luminaire shall have a rated system lifetime of 30,000 burning hours at L70. The luminaire should have a CCT of 4000K,Initial chromaticity <5 and CRI > 80.The luminaire shall meet IP20 rating with THD < 10% and PF > 0.9 and in-built surge protection of 2.5kV. The luminaire housing should made of High Pressure die cast Aluminium with wide beam optics and having gasket of heat proof siliconerubber ring. The total power consumption should not exceed 15W (including driver).

Supply

Installation, Testing and Commissioning

SITC of LED Recess mount downlight light complete with light fitting accessories, including supply of fixing SS accessories, flexible GI metallic conduit sleeves, PVC conduit bushes, Cu cable lugs, Recess mounted with a nominal system lumen output of 2000 lumens and a minimum system efficacyof 110lm/W.The luminaire shall have a rated system lifetime of 50,000 burning hours at L70. The luminaire should have a CCT of 6500K,and SDCM <5 and CRI > 80.The luminaire shall meet IP65 rating with THD < 10% and PF > 0.95 and in-built surge protection of 4kV. The luminaire housing should made of High Pressure die cast Aluminium with wide beam optics and having gasket of heat proof siliconerubber ring. The total power consumption should not exceed 18W (including driver).

Supply

Installation, Testing and Commissioning

SITC of LED light fittings complete with light fitting accessories, including supply of fixing SS accessories, flexible GI metallic conduit sleeves, PVC conduit bushes, Cu cable lugs, LED Bulkhead with a nominal system lumen output of 11000 lumens and a minimum system efficacy of 110 lm/W. The luminaire should have a CCT of 6500K and CRI > 80. The luminaire shall meet IP66 rating and IK 09 rating with THD < 10% and PF > 0.95. The luminaire housing should made of High pressure die cast Aluminium with high quality PMMA diffuser. The total power consumption should not exceed 10W (including driver).

Supply

Installation, Testing and Commissioning

SITC of LED light fittings complete with light fitting accessories, including supply of fixing SS accessories, flexible GI metallic conduit sleeves, PVC conduit bushes, Cu cable lugs,LED decorative type sleek mirror Wall light with high diffuser of 6W(size 175×175×120) with nominal system output of 210lumens and should have a CCT of 3000K and CRI>80.The Luminaire should made of metal with high quality PMMA diffuser.The total power consumption should not exceed 6W (including driver).

Supply

Installation, Testing and Commissioning

Supply and fixing of heavy duty Class-B Galvanised steel (G.I.) ERW conduit pipe of following sizes along with all accessories such as bends, junction box, socket, check nut, etc. including making threads, removing burrs, connection of accessories, cleating with heavy duty GI spacer saddles or suit to site clamps on RCC wall, column, steel structural, etc. as required under the instruction of Engineer-in-incharge. Surface type junction box shall be provided.

Supply and laying of 14 SWG tinned solid copper conductor throughout along the conduit including fixing with ties, brazing etc as required.

Supply

Installation

Supply of Single Core HFFR wires (Copper) of size mentioned below in voltage grade 1100 V as per the IS: 3961 (part V) - 1968. As per conductor class 2 of IS: 8130 / 1984 as per technical specification

Installation/drawing through concealled/ surface conduit,through cable tray and wiring and termination at both ends of Single Core HFFR wires (Copper) of size mentioned below in voltage grade 1100 V as per the IS : 17048 : 2018. As per conductor class 2 of IS: 8130 / 1984 as per technical specification

Junction box/Cable pull box IP64 shall be weather proof type, fabricated out of 2 mm thick GI sheet, cable gland plate at the bottom, suitable to terminate 2 nos. of 3 core x 2.5 sq. mm Cu cable, 8 nos of terminals, etc as required.

Supply

Installation

Supply, Fabrication and Installation of Standard steel sections as per IS 2062 Grade B0 for cable tray supports including GI rod for cable tray support, chequered plates for trench covers, base frames for panels, anchor fasters, wall frames and brackets for supporting equipment. Fabrication shall include drilling, entiling, welding wire brush cleaning, testing DPT etc ,supply of all consumables like gas, approved make welding rods as per tender tech spec. After fabrication two coats of epoxy based primer and two coats of finish paints shall be applied

Supply

Installation

Supply and laying of 95 sq. mm Class-2 stranded tinned copper conductor in RCC trench/ underground upto depth of 1 meter, connection with earth pit at one end and conductor tail at other end, including clamping, brazing, connection etc. as per instructions by Engineer-In-Charge.

Supply

Installation

Supply and laying of 70 sq. mm Class-2 stranded tinned copper conductor in RCC trench/ underground upto depth of 1 meter, connection with earth pit at one end and conductor tail at other end, including clamping, brazing, connection etc. as per instructions by Engineer-In-Charge.

Supply

Installation

Supply and surface/concealed laying of 10 sq. mm tinned coper conductor, connection with earth pad at one end and DBs at other end clamping, brazing etc. as per instructions by Engineer-In-Charge.

Supply

Installation

Supply and installation of test link box for earth pit connection and interconnection of down conductor from lightning protection system to lightning earth pit and should consist of 2mm thick powder coated pre-galvanised G.I. weather proof sheet enclosure with cover, having 50mm x 3mm copper strip link, teflon sealing after connection, earthing stud, etc as required.

Supply

Installation and Testing

Supply and fixing of 25mm x 6mm GI strip along tray using suitable size GI saddel/clamp including interconnection, hardwares, etc as required .

Supply

Installation and Testing

Supply and Installation of 25 mm X 3 mm thick copper strip including connection/ terminating with nut, bolt, spring, washer etc. as required.

Supply

Installation, Testing

Supply and fixing vertical air termination made up of 20mm dia, 1 mtr long copper rod attached to 50mm dia. Copper sphere having drilled and tapped holes for fixing 5 nos. of 150mm long spikes and square copper base plate of 150 mm length and 10 mm thickness as per technical specification and approved drawing.

Supply

Installation, Testing

Supply and laying of 2 x 10sq. mm Cu PVC insulated earthing conductor in 25mm HDPE pipe on surface/ existing concealed including clamping/cleating on wall, making chase, repairing the same, etc as required.

Supply

Installation and Testing

Supply, Installation, Testing and commsissioning of New energy efficient High Grade ABS Basic Hand Dryers, wall mounted, 1800 watt or above, Touch free Infra-red Sensor activation,AC220-240V,50/60 Hz. And as per tender technical specifications.

Supply

Installation, Testing and Commissioning

Supply and Installation of Single phase heavy duty exhaust fan of sweep 300 mm with FRP duct suitable for domestic application.

Supply

Installation, Testing and Commissioning

Supply & Installation of 400 mm sweep wall mounting fan suitable to operate at singlephase 230v A.C. supply having minimum 3 levels of speed control. The fan shall be complete with all the accessories and spares as required.

Supply

Installation, Testing and Commissioning

SITC of Split Air Conditioning unit of 2.0 TR capacity i.e. with cooling capacity not less than 5200 Watt complete with outdoor condensing unit & wall mounted evaporating unit having cordless remote control refrigerant pipe line upto 10 meter length, capable of cooling, filtering & dehumidifying, suitable for operation on 230 volt1=Ph.AC supply (Not less than five star rating model as certified by BEE) with mountings,/ fittings for indoor/outdoor units, insulating the suction pipe with EPF tubing, leak test, charging refrigerant including providing electrical wires and Plug Top with in 4 meter of location of unit etc complete as reqd as per technical specifications attached.

Supply

Installation, Testing and Commissioning

Power cable (A2XWY (P)) of below mentioned size, Aluminium conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with HR PVC type ST - 2 inner sheath and outer sheath FRLSH of extruded PVC type ST2 (P) and ST2 (Y), of 1.1 kV grade as per IS 7098 (Part - 1) 1988(as per latest revision).

Supply

2C x 240 Sq.mm

3.5C x 240 Sq.mm

Underground/Surface/concealed/tray Laying and Dressing as per IS 1255 - 1983.

2C x 240 Sq.mm

3.5C x 240 Sq.mm

3.5C x 120 Sq.mm

Power cable (2XWY (P)) of mentioned size in Sq.mm, Copper conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with HR PVC type ST - 2 inner sheath and outer sheath FRLSH of extruded PVC type ST2 (P) and ST2 (Y), of 1.1 kV grade as per IS 7098 (Part - 1) 1988(as per latest revision).

Supply

2C X 2.5 sq mm

Laying and Dressing on surface/concealed/underground including clamping/ cleating on structure/floor/ceiling/wall/tray, making chase, repairing the same as required.

2C X 2.5 sq mm

4C X 4 sq mm

4C X 10 sq mm

3.5C X 50 sq mm

Excavation in all type of soils of width as specified in the technicals specification as per the size and the no of runs and a depth of 1000mm below ground level, sand bedding, laying of baked brickews on side and top, backfilling ,dewatering, consolidation, shoring, disposal of excess earth, Item includes supply of crushed sand and class- 1 bricks.

Providing, laying and fixing 300 mm dia RCC pipe NP2 class( light duty ), inclusive of road cutting of width 800mm and depth 1000 mm complete with RCC collars, jointing with cement mortar 1:2( 1 cement: 2 fine sand ), 100mm thick encasing the pipe with concrete of 1:2:4 grade, backfilling and concreting (1:2:4 ) as per the attached technical specifications.

Supply of wheather proof type brass double compression glands and Bimetallic lugs for XLPE 1.1 kV grade Al / Cu cable of following sizes as per attached technical specifications.

2C X 2.5 sq mm,Cu conductor

4C X 4 sq mm,Cu conductor

4C X 10 sq mm,Cu conductor

3.5C X 50 sq mm,Cu conductor

3.5C X120 sq mm,Al Conductor

3.5C X240 sq mm,Al Conductor

2C X 240 sq mm,Al conductor

Glanding and End Termination of LT Cables of following sizes as required.

2C X 2.5 sq mm,Cu conductor

4C X 4 sq mm,Cu conductor

4C X 10 sq mm,Cu conductor

3.5C X 50 sq mm,Cu conductor

3.5C X120 sq mm,Al Conductor

3.5C X240 sq mm,Al Conductor

2C X 240 sq mm,Al conductor

Supply of tinned Cu Lugs as per attached technical specification

16sqmm stranded bare tinned copper conductor

70sqmm stranded bare tinned copper conductor

10sqmm stranded bare tinned copper conductor

14SWG solid bare tinned copper conductor

End Termination of PVC insulated Copper conductor,of following sizes as required.

16sqmm stranded bare tinned copper conductor

70sqmm stranded bare tinned copper conductor

10sqmm stranded bare tinned copper conductor

14SWG solid bare tinned copper conductor

Supply and Installation of Hot dip Galvanised ladder type cable tray fabricated out of 2.5mm thick sheet steel having 150 mm width with cable tray cover, side channel of 75mm, rungs spaced at 250mm, single length not less than 2.5mtr with two coupling/joint plates per tray length having one long grove for adjustment with Dome type cover and all suitable accessories ( Couplers / Tees / bends / cross member / connectors, nuts, cable tray cover and bolts ) as per attached technical specification.

Supply

Installation

Supply and Installation of Hot dip Galvanised perforated type cable tray fabricated out of 2.5mm thick sheet steel having 100 mm width with cable tray cover, side channel of 75mm, cross perforation not more than 17.5%, single length not less than 2.5mtr with two coupling/joint plates per tray length having one long grove for adjustment with Dome type cover and all suitable accessories ( Couplers / Tees / bends / cross member / connectors, nuts, cable tray cover and bolts ) as per attached technical specification.

Supply

Installation

Supply and Installation of Hot dip Galvanised perforated type cable tray fabricated out of 2.5mm thick sheet steel having 75 mm width with cable tray cover, side channel of 75mm, cross perforation not more than 17.5%, single length not less than 2.5mtr with two coupling/joint plates per tray length having one long grove for adjustment with Dome type cover and all suitable accessories ( Couplers / Tees / bends / cross member / connectors, nuts, cable tray cover and bolts ) as per attached technical specification.

Supply

Installation

Supply and Installation of Hot dip Galvanised ladder type cable tray fabricated out of 2.5mm thick sheet steel having 300 mm width with cable tray cover, side channel of 75mm, rungs spaced at 250mm, single length not less than 2.5mtr with two coupling/joint plates per tray length having one long grove for adjustment with Dome type cover and all suitable accessories ( Couplers / Tees / bends / cross member / connectors, nuts, cable tray cover and bolts ) as per attached technical specification.

Supply

Installation

Supply and installation of GI Anchor Fastner of Size M16X150 mm by drilling through concrete block as per site requirement for fixing Plate EPs or other structures as per the tender tech spec

Supply

Installation, Testing and Commissioning

(Expanding Fire -stop Foam) Expanding fire stop foam with dispensers, mixer, extension pipes cleaner etc., in disposable catridges for using concrete floors / masonary wall with fire rating up to 3 hours.along with fixing accessories as required,

Supply

Installation

(Fire Stop Mortar) Fire resistant Cement based Mortar with thermal insulating properties in standard sacks for use in concrete and masonary walls with fire rating up to 3 hours. along with fixing accessories as required,

Supply

Installation

(Cable Coating)Fire retardant coating for various sizes for horizontal and vertical runs of cables in cable trays having minimum 3 hrs fire ratings

Supply

Installation

Supply,Installation and commissioning Powder coated Cell phone lockerProviding and placing of 60 door cell phone lockers are 60 hinged door overall size: 945mm (W) X 560mm (D) X 1845mm (H) stand size included.OEM of the product should be ISO: 9001, ISO 14001 and ISO 45001 certified from NABCB Accredited agency.

Prefabricted GI box Fixing of boards fitted with two numbers of RJ-11 sockets unit suitable for concealing or surface mounting at nominated locations including termination of telephone cable conductors on RJ-11 sockets along with it’s modular type front plate and accessories. .

Supply

Installation and Testing

Prefabricted GI box to accomodate modular type 2 Nos. of RJ45 socket unit suitable for concealing or surface mounting along with it's modular type front plate and accessories.

Supply

Installation and Testing

32U Floor standing movable rack with sturdy castor wheels

Supply

Installation

52-port (48x1 Gbps RJ-45 Copper port, 4x1/10 Gbps SFP port) smart web-managed layer-2 network switch

Supply

Installation

24-Port CAT6 Patch panel of 1U size suitable for 19" rack fully loaded with all wiring support accessories.

Supply

Installation

Fully Loaded drawout type, SC type 24-port Fiber Distribution (LIU)System of 1U size suitable for mounting in 19" rack.

Supply

Installation

1Gbps Single Mode (SFP) 1000BASE-LX LC transreciever Module compatible with supplied switch.

Supply

Installation

23AWG CAT6 Armoured UTP cable LSZH type

Supply

Installation

23AWG CAT6 unarmoured UTP cable LSZH type

Supply

Installation

24-core Armoured Single Mode (9/125 um) Multi-tube loosely buffered Fiber optic cable

Supply

Installation

CAT6 Patch cords, 1 meter

Supply

Installation

CAT6 Patch cords, 2 meter

Supply

Installation

SC-LC SM Duplex Fiber Patchcords 2 meter length.

Supply

Installation

SC-LC SM Duplex Fiber Patchcords 15 meter length.

Supply

Installation

LC-LC SM Duplex Fiber Patchcords 2 meter length.

Supply

Installation

LC-LC SM Duplex Fiber Patchcords 5 meter length.

Supply

Installation

LC-LC SM Duplex Fiber Patchcords 10 meter length.

Supply

Installation

4-modular PVC box including cover plate, face plate with 2 nos. of RJ11(4 Pin) connector with shutter telephone socket and 2 nos of RJ45 socket (UTP/STP) with shutter and connector

Supply

Installation

2-modular PVC box including cover plate with face plate with 2 nos of RJ45 socket (UTP/STP) with shutter and connector

Supply

Installation

40 mm HDPE pipe for laying of cable

Supply

Installation

2 pair, 0.5 mm dia., copper conductor, unarmoured telephone cable

Supply

Installation

Supply, installation and commissioning of 25x38mm PVC Casing capping with all fixtures and accessories(Bends, joints, saddles, screws, etc.)

Supply

Installation

Supply, installation and commissioning of 12x32mm PVC Casing capping with all fixtures and accessories(Bends, joints, saddles, screws, etc.)

Supply

Installation

Supply, installation and commissioning of 50x50mm PVC Casing capping with all fixtures and accessories(Bends, joints, saddles, screws, etc.)

Supply

Installation

Fiber optic Splicing and Termination of Connectors

Supply, Installation and testing of work station with all accessories as per tender specification.

Supply & installation Half-mesh,half-cushioned chair. Seat size 76.10cm(L)×76.10cm(W),Height 114-128.20 am & 44 to 54 cm. Mechanism should have following features: 360 degree revolving, Two seat depth, Position locking mechanism back,height adjustable armrest etc. as per technical specification

Supply,Fabrication & Installation of workstation housing cabinet of 1800×600mm with CPU cabinet & cable cutout as per technical specification.

Providing, fabrication and fixing of storage arrangements as per technical specification.

Supply, fabrication and installation of visitor seating arrangement as per technical specification.

Supply and Installation of Casing and Capping of Flame Retardant (FR) PVC material , Ivory Colour, Unplasticised formulation for prolong storage or usage, double lock, ISI Marked as per IS 14927, Highly durability, Resistance to oil and grease of following sizes as required

Size 25mm X 16mm

Size 38mm X 16mm

Size 50mm X 16mm

Size 38mm X 25mm

Size 50mm X 25mm

Size 50mm X 50mm

Suppy and Installation 25 mm GI flexible conduit

Supply

Installation

Installation

EVERCREST PROJECTS PVT LTD.

Yogiraj Powertech Pvt Ltd.

Modern Electric Company

Moon Light

SARASWAT ENGINEERING SERVICES