Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹18.1 L
EMD Value
₹45,400
Closing Date
22 Jan 2025, 8:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Power Transmission Corporation Limited
Amaravathi N
Tender for the work of providing additional 2 nos of 11kV switchgears (2F and 1AP) and extension of outdoor switchgear shelter with allied works at 110/33/11KV Substation Konaje on PTK basis.
KPTCL/2024-25/SS/WORK_INDENT1660
KPTCL/2024-25/SS/WORK_INDENT1660
Open
Sub-Station
Two Tender Document System(Two Cover)
KPTCL SEE Works and Mantainance Circle Mangalore
10 documents required · 10 mandatory
Department Registration Details
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing work
List of works for which tenders already submitted
Banker Details
a)Should have carried out erection of One switchgear/breaker replacement work of 11KV class or above category on Total Turnkey or Partial Turnkey basis, which shall be in satisfactory service prior to date of submission of the Bid OR b)Should have carried out erection of one 110kV terminal bay work on Total Turnkey or Partial Turnkey basis having at least one number of Circuit Breaker which shall be in satisfactory service prior to date of submission of the Bid. The bidder should furnish satisfactory work done certificate issued by officer not below the rank of Executive Engineer or Equivalent.
The Bidder should posses valid Super Grade Electrical Contractor License issued by the Government of Karnataka as on the date of Bid Submission. In addition the bidder should have the following qualifying requirement (Technical).
Minimum Average Annual Turnover (MAAT) of the bidder for best three years out of last preceding five financial years (2019-20 2020-21, 2021-22, 2022-23, 2023-24)shall not be less than Rs 27.22 Lakh
As per tender documents.
₹500
₹45,400
31 Dec 2024
31 Dec 2024
23 Jan 2025
13 Jan 2025
The work of providing additional 2Nos of 11kV Feeders at 110/33/11kV Substation, Konaje
Rubber Mat 600mm X 300mm
11 kV UG Cable XLPE 3 Core 240 Sq mm- (From 11kV Switchgear to Outgoing ODS)
3 X 240 Sq mm 11 kV Heat Shrinkable Cable termination kit for XLPE Cable suitable for XLPE UG Cable indoor
3 X 240Sq mm 11 kV Heat Shrinkable Cable termination kit for XLPE Cable suitable for XLPE UG Cable Outdoor
3 X 240Sq mm 11 kV Heat Shrinkable straight through jointing kit for XLPE Cable with copper lug & AI ferrule
RCC Pole - 9 Mtr Long, 145 Kg WL
Double Pole Galvanised Iron structure kit For RCC Pole - 9 Mtr Long, 145KG WL- GI, As per KPTCL design
11kV 400 Amps double break Galvanised Iron GOS as per KPTCL design
Galvanised Iron H - Frame Set for fixing 11 kV, 400 Amps Double Break GOS as per KPTCL design
10 kV, 5 kA Lightning Arrester Polymeric type with GROUND DISCONNECTOR
Grouding of equipment by providing CI pipe of 100mm ID, 13mm thick, 2.75 mtr long with two part clamp out of G I Flat 50X6 mm continuously welded around the pipe using the cast iron welding electrode ...
11 kV, 5 kN Composite/Polymeric Pin Insulator (24 mm dia FRP Rod)
Name Board/ Danger Plates
Coyote ACSR Conductor for 11kV Jumps at DP structure
Pad clamp suitable for COYOTE ACSR conductor with bimettalic sheet at Palm with Coyote to Coyote C type wedge clamp
19 Core 2.5sq mm copper control cable (From 11kV Switchgear to Annunciator Panel)
2C x 2.5 Sq mm copper control cables (For DC supply for 11kV switchgear from adjacent panel)
4C x 4 Sq mm copper control cables (For AC supply for 11kV switchgear from adjacent panel)
11 kV cable supporting structure
Earth Bond 450 mm Long copper strip
Out door LED lamp 150 W with fixtures and Cable
Multi Functional Transducer(MFT) 0.2S Class
8 Channel 220/110 V Opto Coupler
Current Cable- Copper core with 4.0sqmm cross section multistrand 7 Core for CT Termination (For inteconnection at 11kV Switchgear)
Voltage cables- Copper core with 2.5 sqmm cross section multistrand 4 core for PT Termination (For inteconnection at 11kV Switchgear)
Signal/Communication Cables- Armoured copper Core with 0.5sqmm cross section multistrand 10core (From Annunciator to RTU Panel)
Control Cables-Armoured copper core with 1.5sqmm cross section multistrand 10core (From Annunciator to RTU Panel)
End plate suitable for Knife type TB-
Disconnecting TB-
End plate suitable for Disconnecting TB
SCADA Compatible, MEI make, type VB5 VCB, 12kV, 3 phase, 1250 Amps, STC - 25kA for 3 sec, Control Voltage 110V DC, Motor Voltage 240 V AC, CT Ratio:400-200/1-1A feeder panel with SCADA Compatible 0.2s...
11kV Annunciator panel (remote Annunciation cum control panel) suitable for two feeder panel
11 kV UG Cable XLPE 3 Core 240 Sq mm- (From 11kV Switchgear to Outgoing ODS)
3 X 240 Sq mm 11 kV Heat Shrinkable Cable termination kit for XLPE Cable suitable for XLPE UG Cable indoor
3 X 240Sq mm 11 kV Heat Shrinkable Cable termination kit for XLPE Cable suitable for XLPE UG Cable Outdoor
3 X 240Sq mm 11 kV Heat Shrinkable straight through jointing kit for XLPE Cable with copper lug & AI ferrule
RCC Pole - 9 Mtr Long, 145 Kg WL
Double Pole Galvanised Iron structure kit For RCC Pole - 9 Mtr Long, 145KG WL- GI, As per KPTCL design
11kV 400 Amps double break Galvanised Iron GOS as per KPTCL design
Galvanised Iron H - Frame Set for fixing 11 kV, 400 Amps Double Break GOS as per KPTCL design
10 kV, 5 kA Lightning Arrester Polymeric type with GROUND DISCONNECTOR
Grouding of equipment by providing CI pipe of 100mm ID, 13mm thick, 2.75 mtr long with two part clamp out of G I Flat 50X6 mm continuously welded around the pipe using the cast iron welding electrode ...
Supplying and Providing 450mm dia 450 mm height RCC Hume pipe coller 1.5" to 2" thick for earth pit
Grouding of equipment with 50 x 6 mm GI flat and connecting equipment to the earthmat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes and connecti...
Name Board/ Danger Plates
19 Core 2.5sq mm copper control cable (From 11kV Switchgear to Annunciator Panel)
2C x 2.5 Sq mm copper control cables (For DC supply for 11kV switchgear from adjacent panel)
4C x 4 Sq mm copper control cables (For AC supply for 11kV switchgear from adjacent panel)
11 kV cable supporting structure (0.069MT + 5% Bolt-nuts)
Multi Functional Transducer(MFT) 0.2S Class
8 Channel 220/110 V Opto Coupler
Current Cable- Copper core with 4.0sqmm cross section multistrand 7 Core for CT Termination (For inteconnection at 11kV Switchgear)
Voltage cables- Copper core with 2.5 sqmm cross section multistrand 4 core for PT Termination (For inteconnection at 11kV Switchgear)
Signal/Communication Cables- Armoured copper Core with 0.5sqmm cross section multistrand 10core (From Annunciator to RTU Panel)
Control Cables-Armoured copper core with 1.5sqmm cross section multistrand 10core (From Annunciator to RTU Panel)
Configuration of RTU and Engineering along with validation of data at SLDC
RCC Pole - 9 Mtr Long, 145 Kg WL
Double Pole Galvanised Iron structure kit For RCC Pole - 9 Mtr Long, 145KG WL- GI, As per KPTCL design
11kV 400 Amps double break Galvanised Iron GOS as per KPTCL design
Galvanised Iron H - Frame Set for fixing 11 kV, 400 Amps Double Break GOS as per KPTCL design-
10 kV, 5 kA Lightning Arrester Polymeric type with GROUND DISCONNECTOR
11kV UG cable XLPE 3 core 240sqmm ( from 11kV switchgear to old water supply DP)
RCC Pole - 9 Mtr Long, 145 Kg WL
Double Pole Galvanised Iron structure kit For RCC Pole - 9 Mtr Long, 145KG WL- GI, As per KPTCL design
11kV 400 Amps double break Galvanised Iron GOS as per KPTCL design
Galvanised Iron H - Frame Set for fixing 11 kV, 400 Amps Double Break GOS as per KPTCL design
10 kV, 5 kA Lightning Arrester Polymeric type with GROUND DISCONNECTOR
11kV UG cable XLPE 3 core 240sqmm ( from 11kV switchgear to new water supply DP and relaying of cable during extension of switchgear shelter)
SCADA Compatible, MEI make, type VB5 VCB, 12kV, 3 phase, 1250 Amps, STC - 25kA for 3 sec, Control Voltage 110V DC, Motor Voltage 240 V AC, CT Ratio:400-200/1-1A feeder panel with SCADA Compatible 0.2s...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Additionalities for Formwork, Centering & Scaffolding-Columns
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying red oxide flooring 40 mm thick, with an under layer of 30mm thick M-15 cement concrete and top layer of 10mm thick plaster with 1:3 cement mortar mixed with red oxide finished wit...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)-For Foundation and basement
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Providing and laying to required line and slope roofing with corrugated asbestos cement sheet 6mm. thick fixed with galvanised iron J or L hooks, bolts and nuts 8mm. dia C.I plain and bitumen washers ...
Providing and fixing ridges, hips with asbestos cement sheet roofing with G.I. J or L hooks, bolts and nuts 8mm. dia G.I.plain and bitumen washers, serrated or plain wings, adjustable ridges, includin...
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05 %) total coated thickness with zinc coating 120 g/...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...
Providing Flush / Ruled/ Struck or weathered pointing Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cos...
Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge.
Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of En...
Providing and filling sand in foundation to required depth for sub soil reatment including watering ramming with all leads and lift complete as per specification-for cable trench
Supplying & laying Table moulded bricks class designation 50 (modular)
Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking to the appropriate disposal area as per direction of Engineer-in-charge-Thickness above 40 mm up to 75 mm
Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in require...
Supplying heavy gauge PVC conduit pipe 20mmdia 2mmthick confirming to IS2509 with suitable size bends, junctionboxes, adhesivepaste, etc, and fixing using inverted woodplugs in case of RCC ceiling and...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to...
Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/CC wall, including necessary rawl plugs, machine/NF...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required numbers of machine screws, bolt, nuts, etc., complete on the existi...
Supplying of PVC Batten with integrated LED tube with high quality diffuser with Life of 25000 burning hours & 70 percent lumen maintenance with CRI greater than 80. Power Input: 220-240V at 50/60Hz &...
Fixing all types and all capacities fluorescent / false ceiling/ spot light / LED fitting indoor on the wall/ ceiling / rafters/ griders using 23/ 0.0076" twin twisted PVC insulated wires, required ...
Supplying and fixing of modular 6A flush/projected type socket and 6A flush/projected SP switch & connected accessories on existing modular plate as per IS 3854 and IS 1293
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capa...
Supplying and fixing regular MCB distribution boards on wall/woodboard/flushmounting using required clamps,bolts,nuts etc.,with provision for fixing suitable type capacity MCB's single phase/3phase/si...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
technocommercial sheets to be filled and uploaded.xlsx
Techno-Commercial Worksheet • 0.07 MB
1. NIT.pdf
Tender Document • 0.40 MB
2.IFB.pdf
Tender Document • 0.94 MB
Annexure.doc
Tender Document • 0.13 MB
4.ECC.pdf
Tender Document • 0.45 MB
5.GCC.pdf
Tender Document • 0.70 MB
6. SCC.pdf
Tender Document • 0.54 MB
3.ITB.pdf
Instructions to Tenderers • 0.54 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .