Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.1 CrAdmitted-Finance | ₹4.1 Cr | L1 | Admitted-Finance |
| 2 | L2₹4.2 CrAdmitted-Finance 303 GHS 88 SECTOR 20 PANCHKULA 134113 HARYANA | PANCHKULA | HARYANA | 134113 | ₹4.2 Cr | L2 | Admitted-Finance |
| 3 | L3₹4.7 CrAdmitted-Finance | ₹4.7 Cr | L3 | Admitted-Finance |
| 4 | L4₹4.8 CrAdmitted-Finance | ₹4.8 Cr | L4 | Admitted-Finance |
| Sl No | Description | Qty | Unit | WELWAYS ENGINEERS INDIA L1 | R D Bansal L2 | Intrernational Engineers L3 | Sachdeva Builders L4 |
|---|---|---|---|---|---|---|---|
| 1.00Note: Please refer Schedule 'A' Notes given on serial page No. 19 to 24 of tender documents. | |||||||
| 2.00LUMPSUM/ OTHER PRE-PRICED PROVISIONAL SCHEDULES OF WORKS | |||||||
| 2.01 | Lump sum price worked out by the contractor for BUILDING WORKS as listed in Schedule 'A' Part-I brought forward from serial page No. 25. | 1 | Each | 96,78,423 ₹96.8 L | 94,00,000 ₹94 L | 1,15,12,396 ₹1.2 Cr | 94,00,069 ₹94.0 L |
| 2.02 | Lump sum price worked out by the contractor for SITE CLERANCE AND EARTH WORKS as listed in Schedule 'A' Part-II brought forward from serial page No. 26. | 1 | Each | 7,16,194.56 ₹7.2 L | 9,40,000 ₹9.4 L | 5,00,000 ₹5 L | 6,90,000 ₹6.9 L |
| 2.03 | Lump sum price worked out by the contractor for INTERNAL WATER SUPPLY WORKS Schedule 'A' Part-III brought forward from serial page No. 27. | 1 | Each | 16,418.18 ₹16,418.18 | 12,550 ₹12,550 | 11,000 ₹11,000 | 19,069 ₹19,069 |
| 2.04 | Lump sum price worked out by the contractor for INTERNAL ELECTRIFICATION WORKS Schedule 'A' Part-IV brought forward from serial page No. 28. | 1 | Each | 2,32,972.53 ₹2.3 L | 2,29,000 ₹2.3 L | 2,59,000 ₹2.6 L | 2,32,929 ₹2.3 L |
| 2.05 | Lump sum price worked out by the contractor for SEWAGE DISPOSAL WORKS as listed in Schedule 'A' Part-V brought forward from serial page No. 30. | 1 | Each | 47,477.86 ₹47,477.86 | 58,000 ₹58,000 | 58,000 ₹58,000 | 54,069 ₹54,069 |
| 2.06 | Lump sum price worked out by the contractor for ROAD/ PATH/ CULVERT WORKS as listed in Schedule 'A' Part-VI brought forward from serial page No. 32. | 1 | Each | 18,40,528.84 ₹18.4 L | 20,29,000 ₹20.3 L | 21,00,000 ₹21 L | 20,45,069 ₹20.5 L |
| 2.07 | Lump sum price worked out by the contractor for AREA DRAINAGE WORKS as listed in Schedule 'A' Part-VII brought forward from serial page No. 33. | 1 | Each | 8,47,999.29 ₹8.5 L | 8,50,000 ₹8.5 L | 8,49,000 ₹8.5 L | 8,47,969 ₹8.5 L |
| 2.08 | Lump sum price worked out by the contractor for EXTERNAL ELECTRIFICATION WORKS as listed in Schedule 'A' Part-VIII brought forward from serial page No. 34. | 1 | Each | 19,75,066.08 ₹19.8 L | 22,90,000 ₹22.9 L | 21,25,000 ₹21.3 L | 23,69,000 ₹23.7 L |
Updated dates
Tender Value
₹4.0 Cr
EMD Value
₹4.7 L
Closing Date
26 May 2026, 6:00 pmClosed
Chief Engineer Jalandhar Zone Jalandhar Cantt
HQ Chief Engineer Jalandhar Zone Jalandhar Cantt
PROVN OF SOLID WASTE MANAGEMENT PLANT UNDER GE NAMS
2026_MES_747434_1
81099/E8
Open Tender
Civil Works
365 days
Jalandhar Cantt
As per NIT Documents
9 documents required · 9 mandatory
₹2,000
GE NAMS Amritsar
₹4.7 L
Yes
9 Jun 2026
6 Jan 2026
2 Jun 2026
31 Mar 2026
26 May 2026
12 May 2026
Note: Please refer Schedule 'A' Notes given on serial page No. 19 to 24 of tender documents.
LUMPSUM/ OTHER PRE-PRICED PROVISIONAL SCHEDULES OF WORKS
Lump sum price worked out by the contractor for BUILDING WORKS as listed in Schedule 'A' Part-I brought forward from serial page No. 25.
Lump sum price worked out by the contractor for SITE CLERANCE AND EARTH WORKS as listed in Schedule 'A' Part-II brought forward from serial page No. 26.
Lump sum price worked out by the contractor for INTERNAL WATER SUPPLY WORKS Schedule 'A' Part-III brought forward from serial page No. 27.
Lump sum price worked out by the contractor for INTERNAL ELECTRIFICATION WORKS Schedule 'A' Part-IV brought forward from serial page No. 28.
Lump sum price worked out by the contractor for SEWAGE DISPOSAL WORKS as listed in Schedule 'A' Part-V brought forward from serial page No. 30.
Lump sum price worked out by the contractor for ROAD/ PATH/ CULVERT WORKS as listed in Schedule 'A' Part-VI brought forward from serial page No. 32.
Lump sum price worked out by the contractor for AREA DRAINAGE WORKS as listed in Schedule 'A' Part-VII brought forward from serial page No. 33.
Lump sum price worked out by the contractor for EXTERNAL ELECTRIFICATION WORKS as listed in Schedule 'A' Part-VIII brought forward from serial page No. 34.
Lump sum price worked out by the contractor for EXTERNAL WATER SUPPLY WORKS as listed in Schedule 'A' Part-IX brought forward from serial page No. 38.
Lump sum price worked out by the contractor for BOUNDARY WALL / FENCING / GATE listed in Schedule 'A' Part-X brought forward from serial page No. 39.
Lump sum price worked out by the contractor for WASTE WATER COLLECTION TANK AND LECHATE COLLECTION PITS WORKS listed in Schedule 'A' Part-XI brought forward from serial page No. 41.
Lump sum price worked out by the contractor for COMPOSIT PITS WITH COVER AND EXISTING COMPOSIT PITS listed in Schedule 'A' Part-XII brought forward from serial page No. 42.
MISCELLANEOUS ITEMS OF WORKS -SCH'A' PART-XIII
INTERNAL ELECTRIFICATION WORKS
Supply & fix of LED Street Light Luminaire 25 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens.complete all as specified and directed.
Supply and fixing of security light mounting bracket made out of GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole fitting clamps made out of MS flat of size 40 x 6 mm and nuts and bolts and painting with aluminium paint,all as direced by Engr in Charge.
EXTERNAL ELECTRIFICATION WORKS
S & F junction box poly corbonate size with glass fibre reinforced , environment friendly, recylable, UV resistant , halogen and silicon free anti acid and anti corrosive IP 66/67 in accordance with IE rule internally embedded gasket, junction box including 3 phase 415 volt aluminium bus bar and one No. MCB SP 6A 10KA to control the street light including necessary clamps, nuts bolts to fix the junction box with poles all specified and directed.
Supply and fixing of three core PVC insulated cable with stranded copper conductor of size 1.5 Sqmm complete all as specified.
Supply & fixing GI pipe bracket of 1.5 mtr lomg made out of GI pipe light grade 32 mm dia and bend to shape with suitable cut at bend point & welded as per standard Engg. practice, two Nos MS clamps made out of MS flat iron of size 32X6 mm thick with nuts & bolts, washers complete and drilling of holes for nuts & bolts etc all as specified and directed.
Supply and fixing LED street Light 45 Watt,230V AC outdoor type with high pressure die cast aluminium hosing with modular lens having efficifiencey of 110 lm/watt and heat resistant complete with driver ,lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 Protection complete all as specified and directed.
Supply,laying & fixing in replacement double wall corrugated (DWC) pipes made of high density polythyline (HDPE) with all accessories i.e. all type of joints, Sockets, Elbows, bends and End caps etc. all as specified and directed of size 63mm outer dia and 50 mm inner dia.
Supply,laying & fixing in replacement double wall corrugated (DWC) pipes made of high density polythyline (HDPE) with all accessories i.e. all type of joints, Sockets, Elbows, bends and End caps etc. all as specified and directed of size 80 mm outer dia and 63 mm inner dia.
M & L for drilling hole under the road, pavment, hardstanding by Mechanically or mannually by boringg with bockee for making suitable size of holes for passing LT cable of any size with provn of DWC HDPE pipe of suitable sizes complete all as specified and directed.
DG SET WORKS
Supply, installation, commissioning and testing of eco-friendly Diesel Engine driven generating set silent type confirming to CPCB IV+ condition/norms, 58.5 KVA (46.8 KW) rating as per BS-5514, 04 Cylinder /inline, 4 stoke cycle, Liquid cooled turbocharged, at 1500 RPM, 415 volts (AC 3 phase,4 wire system of supply) 50 Hz at 0.8 power factor directly coupled alternator & engine, water cooled, mounted on common base plate of rigid fabricated mild steel frame platform with floor mounted fuel tank of suitable capacity(minimum 12 hrs capacity of consumption) & including all excavation PCC foundation, anti-vibration pads/ dampers including standard control panel other accessories as per manufacturer's design. The Gen set should be fitted with integrated acoustic enclosure manufactured by the OEM of the Generating set .The Generating Set and acoustic enclosure shall confirm to emission norms and noise level. The acoustic enclosure shall be type tested and certificate obtained for the type approved from approved agencies listed in Govt Notification. Specifications of DG set shall be as specified and comprising of the following:- Make of OEM :- (i) M/s KOEL Green (ii) M/s Sudhir power Ltd (iii) M/s Greaves power (iv) M/s Jackson Ltd (A) ENGINE (Prime mover): Diesel engine vertical type of adequate capacity for 58.5 KVA (46.8 KW), 04 Cylinder /inline, 4 stoke cycle, Liquid cooled turbocharged, at 1500 RPM under NTP conditions of BS : 5514, turbo charged liquid cooled, compression ratio 17.3:1, Nos of batteries as per OEM recommendation for electric battery start, complete with fly wheel and all standard fittings/fixtures as per manufacturer instructions including suitable engine control panel/dash Board with electronic tachometer. Lubrication oil temperature & pressure gauges water temp gauge and frequency meter (digital type) including safety automatic shutdown in case of fault such as high water temperature low oil pressure, over speed etc. including self-starter, alternator, cogged, V belt, fuel tank with first fill of lub oil and coolant(as applicable) etc. complete all as specified. Make of Engine :- (i) Kirloskar (ii) Cummins (iii) Greaves power
(B) ALTERNATOR: Alternator AC ,3 phase 415 volts 4 wire rated line current for output 58.5 KVA, PF 0.8 1500 RPM confirming to BS 5000 directly coupled with above engine. The Alternator shall be brushless type, screen protected, revolving field, self-exited, self-regulated through an AVR. The alternator has the following features :- (i) + 0.5% voltage regulation (max) in static conditions (ii) IP-23 protection with insulation class H (iii) Permissible overload of 10% for one hour in 12 hours of operation. (iv) Anti-vibration pads for mounting engine and alternator assembly on the base frame/plate or as recommended/provided by the manufacturer. (C) Base frame made out of structural steel as per manufacturer's recommended. design/specifications. (D) ACCOUSTIC ENCLOSURE Provision of an integral type approved/certified acoustic enclosure. It shall be made of 16 SWG or manufacturer's standard norms out of CRCA sheet with powder coated finish on outside and provided with non-igniting fire retardant foam as acoustic material of suitable thickness and perforated sheet of stainless steel as per manufacturer design. The doors and glass window shall be as per manufacturer's design. The base frame shall be of ISMC.It shall also include the following:- (i) Silencer: Suitable exhaust Residential grade silencer to reduce the noise level. (ii) Internal wiring with PVC copper cable (ISI 694marked) FRLS in conduit and for light and fan point lamp fittings including lamp. (iii) Fuel tank: Sub Base Fuel tank of 14 SWG MS sheet of capacity considered as per OEM duly powder coated. (iv) Nos of battery as per OEM recommendation maintenance free batteries. (E) The standard digital control Panel suitable to accommodate inside acoustic enclosure all as specified. (F) Base rail : Base rail with integral fuel tank is provided. Make of Alternator :- (i) Kirloskar Green (ii) Stamford (iii) Crompton Greaves
Control Panel : Manually operted Standard Alternator Control Panel fabricated out of sheet steel angle,iron structure,acid treated for anti-corrosion,Floor mounting,cubic pattern,powder coated dust and vermin proof,complete with internal wiring and with the followings. (i) Power Coated control panel manufactured with CRCA sheet provides (ii) Controller which display voltage,current KW,PF,Frequencey,KWH. (iii) MCCB of suitable rating with short circuit protection. (iv) Indicating lamps for "Load On " and "set Running". (v) Current Transformer of suitable ratings. (vi)Copper Cables of suitable capacity with incoming and outgoing terminations. (vii) Control fuses duly wired and ferruled.
Material and labour for earthing complete with galvanized steel earth plate electrode 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of earth plate not less than 1.5m below normal ground level connected with galvanized iron earth strip 32 x 6 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel complete with 40mm dia GI light grade protection pipe, 20mm dia GI Medium grade watering pipe with funnel including charcoal, dust, salt, PCC M-15 type B1 in pit with angle iron (25x25x3)mm frame work with precast RCC 1:2:4 type B-1 cover reinforced with 8mm dia TMT bars @ 150mm C/C both ways and 12mm dia MS fabricated handle, test point etc. in and including light grade GI protection pipe 40mm bore up to 5m length for drawing in earth lead wire, all as shown in electric plate No. 3 of SSR Part-I complete with necessary earth work in any type of soil, removal to a distance not exc. 50m, testing on completion complete all as specified & directed.
EXTERNAL WATER SUPPLY WORKS
M& L for taping from Existing GI 40mm pipe including cutting, jointing and inserting Tee, and alll accessories on qouted rate. Note : Gate valve shall be measured and paid separately under respective items.
M & L valve pits and constructing of brick masonary pits of internal dimensions 600 mmx 600mmx 600mm(bottom PCC floor of the pit should be minimum 30 cms below the bottom surface of sluice valve flange to provide sufficient working space ), bottom floor of the pit be constructed in PCC (1:3:6) 51 cms thick with 20 mm stone aggregate , inner and exposed surfaces and bottom floor of the pit should be plastered in CM (1:4) 15 MM thick. The sluice valve and other fittings should be housed in center of the pit. The verticesof the pit should in right angle and champhered. The top cover of the pit will be made out of MS sheet min 2 mm thick with angle iron frame made out of MS angle 50 mm x50 mm x 6mm with galvanized steel hindges two nos and locking arrangements duly painted with two coats of water resistant synthetic enamelled paint over one coat of red oxide.
EQUIPMENTS
Supply and fixing of Composting Solution for Wet Waste of capacity 4 Sets / 8 nos of My Green Bin MGB 1000 with following specifications (i) Each MGB 1000 of size – L 6.70 m x 2.0 m x 1.40 m made out of FRP Panel Including Real time monitoring system for measurement of waste composted, CH4 & CO2 emissions with automated alerts & notifications and seamless integration with user friendly Dash Board. (ii) Smart composting with real time tracking,automated alerts,and remote access. (iii) Data analytics optimize processes,while a user -friendly dashboard ensures ease (iv) Scalable,modular and API-integrated for seamless expansion and connectivity (v) Low-maintenance design reduces manual effort,enhancing efficiencey and reliability (vi) FRP Panel of thickness 5 mm with the interior of the Composter finished with additional FRP ribs of width 200 mm with 8 mm aerator holes are made inside and outside,top and bottom,joined together with FRP Lining and SS fasteners. (vii)The Bottom tank to be height 100 mm and coverd with FRP Plates of thickness 5 mm with 8 mm holes for the Leachate to be collected. The bottom tank is provided with 20 mm Ball Valve-02 Nos. (viii)The Central portion to have FRP channels with 7 nos of 75 mm aerator pipes with 8 mm holes supported between top and bottom FRP channels with end caps. (ix) The Bin have 8 doors of rectangular shapes fixed with a door Locking system.The doors are reinforced with a metal frame of 2 mm thickness. (x) The top of the Composter is Provided with 8 lids,all of FRP of thickness 3 mm with SS stay.The Composter to be engulfed outside with 50mmx 25 mm Painted MS Section at 2 levels (xi) the Composters will be provided with 1 Blowers mounted on Platform-Blowers of specification : 3 Phase ,Power Input-1.5 HP,2900 RPM, Air flow 2000 cub.mtr/hr and the blower discharge size of 200 mm x 100 mm (internally) & coupled with FRP Ducting sized 150 x110 mm spaced at a distance of 400 mm.
(xii) The Composters are provided with an SS handle of size 250 mm and SS hinges Complete. We above package also includes Greenrich Microbes for usage of 1 month - Aerobic Microbial Composting Culture Specification- Composting agent formulated using cocopeat along with micro & macro nutrients and Cultured with Lignocellulolytic Organisms, Complete all as specified and directed Make : Greenrich .or equivalent make.
Supply ,testing and commosioning of Shredder Cum Predigestor of capacity 10 HP have Following Specification. (i) Predigestor with Working capacity 800-1000 Kg per Hour (ii) Motor 10 HP (5 HP+5HP) (iii) Material of the Shredder cum Predigestor is MS/Carbon steel (iv) MOC of Mesh & Hopper is Stainless Steel (ss) all as specified and directed by Engr-in-Charge. Make: Greenrich .or equivalent make.
Supply ,testing and commosioning of Churner of Capacity 5 HP have Following Specification- (i) Churner with Working Capacity : 800-1000 Kg per hr (ii) matreial of the outer Body is Mild Steel (MS) (iii) Material of inner Body is Stainless Stell (SS), Complete all as specified and directed by Engr-in Charge. Make : Greenrich or equivalent make.
Supply of Green rich microbes for 2 years (20 Ltrs Bags) ihave Following Specification- (i) Type of Bio culture-Aerobic microbial Composting Culture Specification- Composting agent formulated using cocopeat along with micro & macro nutrients and cultured with lignocelluloytic Organisms. (ii) Fungal Population Count- in the range of 105 to 106 Odour -Free Electrical Conductivity with in the range of 0.4 -3 PH With in the range of 5-6.5 For Composting Process is 30 days. Complete all as specified and directed. Make : Greenrich or equivalent make.
Supply ,testing and commosioning of Screw Conveyor 2.5 mtr length have Following Specification- (i) 600 mm Length x 750 mm width x800 mm Height (ii) Belt : PVC Green colour (iii) speed is 4 m/min (iv) Frames consist of Powder Coated Mild steel (MS) (v) Roller consist of Zinc coasted Mild Steel (MS) , (vi) Power Input : Single phase 230V (vii) speed is variable through VFD Complete all as specified and directed. Make: Greenrich or Equivalent make.
Supply ,testing and commosioning of Dust Remover Machine Following Specification- (i) 10 HP Moto New Standard Company (ii) Roll heavy Duty 115 MM (iii) 45 MM pedestal Bearing Heavy duty (iv) Heavy duty machine fabrication (v) Starter have Star Delta with on /off Button (vi) Benifits of these Additions; Complete all as specified and directed. Make : Greenrich or equivalent make.
Supply ,testing and commosioning of Flat Conveyor – 6 mtr length have Following Specification- (i) 600 mm Length x 750 mm width x800 mm Height (ii) Belt : PVC Green colour (iii) speed is 4 m/min (iv) Frames consist of Powder Coated Mild steel (MS) (v) Roller consist of Zinc coasted Mild Steel (MS) , (vi) Power Input : Single phase 230V (vii) speed is variable through VFD Complete all as specified and directed. Make: Greenrich or equivalent make.
Supply ,testing and commosioning of Plastic Waste Shredder have Following Specification- (i) Working capacity of 750-800 kg per hr (ii) Moter is 15 HP (7.5 HP +7.5 HP Dual motor) (iii) material of the outer Body consist of Mild steel (MS) (iv) material of the inner Body consist of Stain less steel (SS), Complete all as specified and directed Make: Greenrich.or equivalent make.
Supply ,testing and commosioning of Naturemate Zero Fuel Solid Waste Incinerator have Following Specification- (i) Capacity 100 Kg/hr (ii) Effectice height (from level )-10 mtrs (iii) Green rich Naturemate Zero Fuel Soild Waste Incinerator (400-500 Kg per day) (iv) Combustion Chambers : The Incinerator will include separate Combustion chambers for controlled burning of soild waste. the chamber will be designed to mximize combustion efficiencey and minimize emission. (v) diemension : dia.1000mm ,Height 1530 mm , thickness 8 mm for combustion chamber. (vi) Material : Fine Grain free steel plates,quenched and tempered for tougher and higher impact energy. (vii) volume is 1 cubic meter /35.32 CFT (viii) Thermal insulation (a) inner core : Premium quality cement using reinforce ment TMT -V (b) outer core :Glass wool -50 mm thick protected with aluminium plate 1.00 mm .thick (ix) Other Feathers: Waste loading door,Emergencey door,Peep hole,Ash Chamber with door all as specified and directed. Make: Greenrich or United Saini Builders,Saram Enviro Services Pvt.Ltd.or equivalent make.
Supply ,testing and commosioning have Following Specification: (i)Chimney Material : Carbon steel pipe seamless (ii)Chimney Dimension: A 200 mm diameter Chimney will be installed with a height of 10 mtrs.The chimney will be equipped with emission control devices to ensure compliance with environmental standard. (iii) Emissiion Control devices : Wet scrubbing system with diffuser,Secondary burning with the help of additional airinlets tubes. (iv) Water consumption: 100 lts/ cycle. (v) Additional features : (a) Port hole and access ladder for routine maintenance and emission tests (b) Specially designed diffuser prevents rain water entering the chamber, complete all as specified and directed. Make: Greenrich or United Saini Builders,Saram Enviro Services Pvt.Ltd.or equivalent make.
SEWAGE DISPOSAL WORKS
S&F on site LLDPE conventional septic tak designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete with upflow filter including media for 10 Users, complete all as specified and directed
M&L soakage well of size 1.20m dia and 3.0m effective depth excavation in any type of soil foundation in PCC 1:3:6 walls of honey combed masonry with top ring M-25 concrete including intercepting chsmber made of brick masonry in CM RCC cover slab in M-25/ SFRC cover interconnecting pipes of RCC/DWC complete with brick bats complete all as specified and directed
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.25 MB
TenderDocuments81099.pdf
Tender Documents • 2.56 MB
BOQ_837012.xls
BOQ • 0.35 MB
STD2.rar
Additional Documents • 14.88 MB
SD_WD_DRGS.rar
Additional Documents • 2.06 MB
TD.rar
Additional Documents • 16.50 MB
STD1.rar
Additional Documents • 13.87 MB
Download all tender documents and submit your bid