801531/E8 ADDN ALTN TO OMQs PHASE III AT AF STATION TAMBARAM

Amount

Schedule 'A' Part - I (B/R ITEMS):-Dismantling floor hearth or existing wall tiling including cement mortar bedding including backing and removal of debris from the site, etc complete all as specified and as directed

Demolition of cement concrete of any description and in any position not otherwise specifically provided for and removing the debris complete all as specified and as directed.

Demolition Stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc and removing the debris complete all as specified and as directed.

Demolition of reinforced cement Concrete in roofs, floors(other than ground floors), beams, staircase, landing, chajjas, RCC jallies and similar suspended work(reinforcement cut as required to facilitate demolition) and removing debris as directed by Engineer-in-charge.

Demolition of mild steel works such as grills, gratings, guard bars of any description complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified.

Demolition of brick work built in cement mortar including all quions, arches, pillars etc complete all as specified and as directed.

Dismantling Single layer Mangalore pattern or similar tiles in roofing ,complete all as specified and as directed.

Taking down wooden roof trusses, coupled rafters or trussed beams with clear span above 8 Metres and upto 12 Metres all as specified and as directed.

Dismantling unframed timber scantlings 40 sq.cm and over in section, in any position,unframed work complete all as specified and as directed.

Description all as per item No 10 above but in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section.framed work complete all as specified and as directed.

S&F Structural steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of Fe 410-W (Gde-E- 250) quality-A complete all as specified and as directed

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with any size and shape self tapping screws as specified complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F Milld steel work as in wind ties for roof including securing bolts; etc including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed

S&F 4 mm thick designer pattern AC sheet ceiling boards of size 595 x 595 mm with powder coated GI frame work of grid 600 x 600 mm, fixed with 4 / 6 mm dia GI wires hanged from roof truss/roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia , 40mm long or as per site requirment,fixed in flat or sloping including two coats of oil bound distemper complete all as specified.

Material and labour for providing precast cement concrete louvres and jallies in repairs, 50 mm thick (mea sured solid), including all mouldings. set in Cement Mortar 1:4, Type B0, 1:2:4, using 12.50mm graded aggregate., complete all as specified and as directed.

Taking down chowkats frames with shutters (without taking off shutters from frames) not exceeding 1.5 Sqm each complete all as specified and as directed.

Taking down chowkats frames with shutters (without taking off shutters from frames) exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as specified and as directed.

Taking down shutters of any description of area exceeding 1.0 sqm but not exceeding 2 sqm each complete all as specified and as directed.

Material and labour for reinforced cement concrete 1:2:4 (nominal mix), type B1 (20 mm graded aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Material and labour for form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) finished rough to flat surface all as specified and directed.

Material and labour for form work to chullah hoods, chajjas, troughs and similar items including edges finished rough to flat surface all as specified and as directed.

Material and labour for form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5cm but not exc. 10cm wide, rough finished surfaces of concrete all as specified and as directed.

Material and labour for reinforced cement concrete (nominal mix) 1:2:4,type B1 (20 mm graded aggregate) as in Chajjas complete all as specified and as directed.

Material and labour for providing precast reinforced cement concrete 1:2:4, type B1 (20mm graded aggregate) as in cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, shelves and similar articles with plain faces set in CM 1:6 complete all as specified and as directed.

Material and labour for mild steel TMT bars 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as specified and as directed.

Material and labour for providing plain cement concrete type C1, 1:3:6 (using 40mm graded stone aggregate) 75mm thickness as in plinth protection and the like etc., finishing even and smooth without extra cement complete all as specified and as directed

Taking down of existing sunken slab treatment from the sunken portion and removing of existing filling cracks with sealing compound, brushing with neat cement slurry @ 3.00 kg/sqm and grouting 25mm thick cement concrete type B-0 (1:2:4) (using 12.50 mm graded stone aggregate) on sunken slab portion including filling of brick bats and finishing the top surfaces with 25mm thick in cement concrete 1:2:4, type B-0 ,using 12.5mm graded aggregate finished even and smooth without using extra cement and appplying two coats of acrylic cementitious water proofing coating (Dr FIXIT pidifin 2K manufactured by M/s Pidilite Industries Ltd or equivalent ) and followed by laying protective screed 15mm thick CM (1:3) alongwith liquid water proofing compound of approved make on top surfaces of sunken slab after preparation as mentioned above, method of application for acrylic cementitious water proofing coating shall be followed as per manufactures instructions complete all as specified and directed.

Material and labour for providing 30mm thick PCC 1:2:4, type B-0, using 12.5mm graded stone aggregate as in sub base complete all as directed.

Material and labour for Screed bed or bedding layer of cement mortar 1:6, 15mm thick for laying floor finishes complete all as specified and as directed.

Material and labour for rendering 10mm thick in cement mortar 1 : 4 on brick or concrete surfaces to receive as backing coat complete all as specified and as directed.

Material and labour for light shade Vitrified ceramic tiles 9 to 10 mm thick (square / rectangular) area of each tile not exceeding 0.36 sqm in floors, set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tiles , complete all as specified and directed.

Description all as per item No 33 above but in vertical surfaces complete all as specified and as directed.

Material and labour for Joint free Non skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. Note: Colour of tile will be finalized by Engineer-In-Charge)

Description all as per item No 35 above but in vertical surfaces complete all as specified and as directed.

Material and labour for Non skid ceramic coloured tiles 7-8 mm thick (square/ rectangular) area of each tile exc 0.11sqm but not exceeding 0.18 Sqm in floors etc .set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Material and labour for Joint free Glazed ceramic coloured tiles in vertical surfaces 450 x 350 x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to matchcomplete all as specified and as directed.

Material and labour for screed bed or bedding layer of mortar 20mm thick for laying floor finishes in CM (1:6) etc complete all as specified and as directed.

Material and labour for18 to 20mm thick granite slab (grey) machine cut bedded jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting, grinding & polishing all as specified and as directed .

Material and labour for rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed.

S & F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc. Minimum thickness of powder coating 50 micron complete all as specified and as directed.

S & F powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. Thickness of powder coating not less than 50 micron complete all as specified etc. complete all as specified.

S&F Framed work such as window grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors,ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

S&F Mild steel hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed.

Description all as per item No 47 above but figured or frosted glass, on one side complete all as specified and as directed..

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and as directed.

Material and labour for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 as in kerb stone and the like etc complete all as specified and as directed( B/R works- 35.17cum+Chain link fencing-330Cum)

Material and labour for half thick brickwork with sub class B bricks straight or curved on plan exc 6 M mean radius built in CM 1:4 complete all as specified and as directed.

Material and labour for rendering 15 mm thick on brick walls with CM 1:4 finished even & smooth without using extra cement including water proofing compound complete all as specified and as directed.

Material and labour for rendering 10 mm thick on brick walls with CM 1:4 finished even & smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 5 mm thick as on ceiling in CM 1:3 finished even & smooth without using extra cement complete all as specified and as directed.

Taking down of steel tubing and connections complete on walls floors etc for 15mm bore of pipe

All as per item No. 54 above but bore of pipe in 20mm dia.

All as per item No. 54 above but bore of pipe in 25mm dia.

Supply and fixing 16 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

All as per item No. 57 above but outer diameter of the pipe is 20 mm.

All as per item No. 57 above but outer diameter of the pipe is 25 mm.

Refixing of old steel tubing and connections in new or old positions (walls ceiling floors etc) bore of pipe 25mm.complete all as specified and as directed.

Cutting chases on brick walls, pinning in, making good to facings where required and pointing in CM 1:3 for concealed water tubing cutting not exc 10cm girth complete all as specified and as directed.

Supply and fixing in repairs white viterous china water closet pedestal pattern with P or S trap including heavy duty white EWC seat cover flat bottom solid with CP hinging device, nuts and bolts etc and including connection to flush and water pipe etc complete all as specified and as directed.

Supply only Seat Cover for EWC White flat bottom solid with CP hinging device, nuts & bolts etc complete all as directed

Supply and fixing in repair vitreous china squatting pan of Orissa pattern size 580 x 440 mm white with P or S trap and integral foot rests (excluding flushing cistern and flush pipe) including trap set in including provision of lime concrete bedding. complete all as specified and as directed.

Supply only PVC valveless, syphonic action type, flushing cistern of 10 ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe all as specified and as directed

Supply and fixing in repairs viterous china WHB flat back of size 550x400mm including GI Brackets, CP brass waste coupling with check nut and washers of suitable to be complete all as specified and as directed.

Supply and fixing CP soap dish, approximate size 160x 160x90mm , fixed to plugs with chromium plated brass screws on walls. complete all as specified and as directed.

Supply and fixing in repairs 15 mm bore, Cast Copper alloy Chromium plated angle Stop Valve with flange, screwed down , high pressure with fancy type screwed both ends of iron pipe , chromium plated with long shank and cup (concealed type). complete all as specified and as directed.

Supply and fixing 15mm dia PVC Connection 450 mm long with PTMT nuts complete all as specified and as directed.

Supply and fixing 15 mm bore brass chromium plated fancy type bib Taps long shank with flange, crutch or butterfly handle, screwed down , screwed for iron pipe complete all as specified and as directed.

Supply and fixing 15 mm bore brass chromium plated fancy type Pillar taps with capstan heads, screwed down high pressure ,with or without lettered 'Hot or Cold ' with long screwed shanks and fly nuts , screwed for iron pipe complete all as specified and as directed.

Supply and fixing 15mm brass chromium plated mixer for mixing hot & cold water screwed down for iron pipe with flange and fixed all as directed complete all as specified and as directed.

Supply and fixing CP toilet paper holder, fixed to walls with chromium plated (CP) brass screws complete all as directed.

Supply and fixing in repairs 125mm size brass chromium plated shower rose with swivel joints including fixing to steel/PVC pipes or unions complete all as directed.

Supply and fixing Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as directed.

Supply and fixing 75mm dia UPVC (SWR) floor trap with grating including jointing with solvent cement complete all as specified and as directed.

Supply and fixing in repairs 75mm dia UPVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as directed.

Supply and fixing in repairs 75mm dia UPVC (SWR) pipes single socketed in any length with rubber ring joint laid in trenches or in floors complete all as specified and as directed.

Supply and fixing in repairs 110mm dia UPVC (SWR) pipes single socketed in any length with rubber ring joint laid in trenches or in floors complete all as specified and as directed.

Supply and fixing 75mm dia UPVC (SWR) bend without access door complete all as specified and as directed.

Supply and fixing 110mm dia UPVC (SWR) bend without access door complete all as specified and as directed.

Supply and fixing 75mm dia UPVC (SWR) bend with access door complete all as specified and as directed.

Supply and fixing 110mm dia UPVC (SWR) bend with access door complete all as specified and as directed.

Supply and fixing 75mm dia UPVC (SWR) junction(Single T) equal or unequal with access door complete all as specified and as directed.

Supply and fixing 110mm dia UPVC (SWR) junction(Single T) equal or unequal with access door complete all as specified and as directed.

Supply and fixing 110mm dia UPVC (SWR) junction(Double T) equal or unequal with access door complete all as specified and as directed.

Supply and fixing in repairs rotational moulded triple layer polyethylene water storage tank (cylindrical Vertical with closed top) hoisted and fixed in position all as specified, 500 Ltr Capacity including dismantling existing water tanks , all as specified in SSR part–I and as directed

Supply and fixing in repairs rotational moulded triple layer polyethylene water storage tank (cylindrical Vertical with closed top) hoisted and fixed in position all as specified, 1000 Ltr Capacity including including dismantling existing water tanks , all as specified in SSR part–I and as directed

Supply and fixing 20 mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

Supply and fixing 25 mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

Supply and fixing stop valves for 25mm dia, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

Supply and fixing sinks with drainage board made of stainless steel 1mm thick, kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

Taking down chowkats or frames (PVC) of area not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frame) complete all as specified and as directed.

Supply and fixing wood free EPS factory made solid PVC moulded flush door shutter 28 to 30mm thick (style) with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm thick plain colour prelaminated PVC sheet on back face supplying & fixing in frame at site as per specification & drawingcomplete all as specified and as directed.

Material and labour for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube as specified and directed

Supply and fixing aluminIum anodised barrel tower bolt of size 150mm extruded section complete all as specified and as directed.

Supply and fixing extruded Aluminium alloy handle fabricated type, anodised of size 150mmcomplete all as specified and as directed.

Supply and fixing 2nd class Hard wood plain, solid, straight chowkats and frames wrought, framed rebated on the solid, rounded or chamfered, put togather with glue pinned at joint complete all as specified and as directed.

Supply and fixing 2nd class HW rail and style Plain framed, panelled shutter thickness of shutters 35mm with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

Supply and fixing Flush shutters 35 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

Supply and fixing 2nd class Hard wood glazed/skeleton shutters 35mm thick open rebated prepared to receive glass, gauze divided in squares with plain, chamfered or rounded, mitred and with out sash bars ,chamfered or rounded, mitred and rebated beads for securing glass gauze etc complete all as specified and as directed.

Supply and fixing non magnetic stainless steel wire mesh of nominal dia of wire 0.36mm and average width of aperture 1.40mm & fixed with stainless steel wire staples including wooden fillets/beadings, screws etc complete all as specified and as directed

Supply and fixing in repairs, 18/19 mm thick pre-laminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as cup board shutters, shelves, kitchen cabinets, partition etc complete all as specified and as directed

S & F in repairs continous (piano) hinges mild steel, 40mm width of flaps (when open), bright finish or electro galvanised complete all as specified and as directed.

S & F Mortice lock of Brass 4 lever, vertical type, size 100mm. Make : Godrej/ Harrison/ Link/ Navtal complete all as specified and as directed.

S & F Locks, cupboard, grade I, size 50 mm, Brass, 4 Lever. Make : Godrej/ Harrison/ Link/ Navtal complete all as specified and as directed.

S & F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, polished, bright finished complete all as specified and directed.

S&F Aluminium anodised barrel tower bolt of extruded section of size 150mm complete all as directed.

S&F Aluminium alloy, anodised sliding door bolt, with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolt of extruded section or cast alluminium alloy of size 300 mm complete all as specified and directed.

S&F MS butt hinges medium weight 100mm long to wooden frame. complete all as directed.

S&F MS butt hinges fixed in repairs medium weight 100mm long to wooden frame. complete all as directed.

Resecuring or easing & adjusting without taking down shutters of any description exc 1 Sq.m and n.exc 2 Sqm each complete all as directed

S&F in repairs Aluminium alloy anodised barrel tower bolts of extruded section 100 mm long and fixed complete all as specified and directed.

S&F Aluminium alloy anodised barrel tower bolts of extruded section 100 mm long and fixed complete all as specified and as directed

S&F in repairs Aluminium alloy anodised barrel tower bolts of extruded section 200 mm long and fixed complete all as specified and as directed

S&F Aluminium alloy anodised barrel tower bolts of extruded section 200 mm long and fixed all as specified and as directed

S&F in repairs Aluminium alloy anodised handle D type 150mm all as specified and as directed

S&F in repairs Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring 150mm long complete all as specified and as directed

S&F Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring 150mm longcomplete all as specified and as directed.

M&L for preparation of new plastered surfaces and applying two coat of OBD over a coat of wall care putty 2 to 3mm thick complete all as specified and directed by the Engr-In-Charge.complete all as specified and as directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint complete all as specified and directed by the Engr-In-Charge.

M&L for preparation of newly plastered ceiling surfaces and applying three coat of white wash complete all as specified and directed by the Engr-In-Charge.

M&L for complete removal of existing treatment from wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistance primer and wall care putty 2 to 3mm thick complete all as specified and directed by the Engr-In-Charge.

M&L for complete removal of existing treatment from wall surfaces and applying two coats of cement base paint complete all as specified and directed by the Engr-In-Charge.

M&L for complete removal of existing treatment from wall surfaces and applying three coats of white wash complete all as specified and directed by the Engr-In-Charge

M&L for preparation of old decorated surfaces of ceiling and applying two coats of white wash on ceiling evenly complete all as specified.

M&L for preparing new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by the Engr-In-Charge

M&L for preparing of old wooden surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint.complete all as specified and directed by the Engr-In-Charge

M&L for preparation new steel surfaces of any description and applying two coats of synthetic enamel paint over a coat of Red Oxide, Zinc Chrome, complete all as specified and directed. ( B/R items- 797.10Sqm & Chain link fencing - 496.65Sqm)

M&L for preparation of old steel surfaces of any description and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted surfaces of plastered walls of any description over 10cm girth or width, not otherwise described and applying one coat of plastic emulsion paint complete all as specified and as directed.

M&L for preparation of old treated surfaces of any description, over 10cm in width or girth and applying one finishing coat of varnish all as directed

M&L for cutting holes in to brick wall built in cement mortar exc half brick & n.exc full brick and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and as directed.

M&L for small articles such as hold fasts etc. of Flat Iron 25 x 3mm, Grade confirming to Fe-290 Gde E-165, complete all as specified and as directed.

M&L for preparing of creosote small articles such as hold fasts, end of posts etc. of area n.exc 0.1Sqm and treated with tar or coal tar black paint complete all as specified and as directed.

M&L for preparing of wood and wood based materials, steel, and iron work, new or old and treating ends of posts, backs of chowkats, etc, area tarred exc 0.1 sq m but n exc 0.5 sq m each and treated with tar or coat tar black paint complete all as specified and as directed.

Demolition of plain cement concrete in floors (other than ground floors) and similar suspended works including disposal of demolished materials exc 500m but n.exc 1000m all as specified and as directed.

Material and labour for PCC 1:2:4, type B0, using 12.5mm graded stone aggregate, 25mm thick as in levelling course, padding concrete on roof surface/ platforms of water tanks/ shelves etc. including use of necessary form work and finishing the exposed surfaces of concrete even and fair without using extra cement all as specified and as directed.

S&F in repairs pre laminated particle board 18/19 mm thick interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination with lipping as in pelmet boxes all as specified and as directed

M&L 2nd Class Hard wood / teak wood lipping, 6mm thick fixed with nails/adhesives to pelmet boxes including necessary varnishing/polishing etc complete all as specified and as directed

S&F 12 mm thick machine pressed veneered decorative plywood, grade 1 with decorative face veneers on both faces, fixed with hidden screws to frame work if any, including edge moulding, side lipping etc all as specified and as directed

M&L for removing existing water proofing treatment and applying water proofing treatment on horizontal or vertical surfaces by applying oil bound bitumen primer @ 0.20 Kg/sqm and providing 4mm thick APP modified water proofing membrane weighing not less than 4 Kg/sqm reinforced with non-woven polyester matt weighing not less than 160 gm/sqm including minimum 10cm side lap and 15 cm end lap torch sealed and bonded and applying a coat of blown grade hot bitumen 90/15 over and below the membarane @ 1.20 Kg/sqm in drying over the membarane finished with solar reflective bituminous aluminium paint/ primer @ 0.10 Kg/sqm over RCC roof slab/ parapet after cleaning the surfaces by removing dust, dirt etc., as per manufacturers instructions complete all as specified and as directed.

Description all same as item No. 142 above but except aluminium paint/ primer, for accessible roof, with cement concrete tiles 25cm x 25cm x 20mm thick with grey cement and no pigment, machine pressed, set jointed and pointed in cement slurry in floors and cut and polished over screed bed 15 mm CM 1:6 all as specified and as directed.

S&F stainless steel tubular 20mm external dia for curtain rod in pelmet box, curtain rods etc complete all as specified and as directed.

S&F 100mm long stainless steel handle for kitchen Cabinet/cupboad and the like complete all as specified and as directed.

S&F magnetic catches for kitchen cabinet doors and the like all as specified and as directed

S&F SS Plate rack of size 900mmx 1000mm thick of 1.00 mm, fixed in repair complete all as specified and directed. Make : Diamond/ Nirali/ Neelkand

S&F CP brass Bib tap Swival type, sink cock swinging spout with flange complete all as specified and as directed.

S&F stainless steel brackets incl fincals for item No 144 here-in-before complete all as specified and as directed.

S&F aluminium powder coated door seal fixed at bottom of the door complete all as specified and as directed.

S&F Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws size of hasp and staple 75 mm complete all as specified and as directed.

S&F brass Chromium plated Shower arm 375mm length, Make : Prayag Drizzle Cat No:BOS - 50 or equivalent in Jaquar/ SOMA/ Leader/ Zoloto/ Parryware complete all as specified and as directed.

S&F brass chromium plated health faucet with 1mtr Tube & Hook, Make : Prayag Droplets Cat No. BEA - 41 or equivalent inJaquar/ SOMA/ Leader/ Zoloto/ Parryware complete all as specified and as directed.

S&F100 mm long stainless steel butt hinges & screws for PVC doors complete all as specified and as directed.

S&F Toilet cabinet mirror of size 350 x 450mm with all fittings and complete fixed to wall : Make : Prayag Cat No : 551 or equivalent make as per list of manufacturers here-in-after complete all as specified and as directed.

S&F corrugated waste down pipe of polyethylene of low or high density or UPVC 31/32 mm dia,1150mm long for wash hand basin,Make: Prayag CAT No: 330 or equivalent make as per list of manufacturers here-in-after complete all as specified and as directed.

S&F Cast Copper alloy, Chromium plated washing machine bib cock with flange complete all as specified and as directed.

M& L Post constructional Antitermite treatment, along external wall below concrete or masonary apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in apron complete all as specified and as directed.

M & L Post constructional Antitermite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed.

M & L Post constructional Antitermite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre / hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same. complete all as specified and directed.

M&L Roughening surfaces of old concrete floor by picking, sweeping, clean and washing down with water to remove dust etc including brushing neat cement slurry with 3.0kg of cement per sq. metrecomplete all as specified and as directed.

S&F Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed

Description all as per item No 162 above but for vertical surfaces as in riser of steps, skirting, dado and pillar laid over cement screed skirting/dado etc complete all as specified and as directed

M&L 100 mm thick Plain Cement concrete 1:4:8 as in sub base type D-2, complete all as specified and as directed

M&L Cement concrete 1:2:4 (20mm graded aggregate) as in floor, 50 mm thick type B-1, finishing cement concrete surface even and smooth using extra cement all as directed.

M&L Glass dividing strips, 3 mm thick and inserted in position, conform to design width of strip 38 mm complete all as specified and as directed

S&F Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges all as specified and as directed.

S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed all as specified and as directed.

S&F Double action spring hinges, mild steel with steel wire spring, stove enamelled, black,size of hinge 100 mm all as specified and as directed

S&F in repairs Mild steel, plain, black sheet 1.25mm thick, in wall cladding, steel gates and similar work, cut to size, fixed to steel framing with plain 40 mm lap joints welded seams, including bending or turning up, mitred angles, sheeting is welded to frame etc. as required complete all as specified and as directed.

Running welding in repairs,thickness of metal to be welded n.exc 6 mm complete all as directed.

Welding in repairs exc 2.5cm but n exc 5cm in length for hinges in old pressed steel door frame etc.complete all as directed.

S&F Joist, channel, angle, or tee sections,Fe-290 (Gde E165 fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated). NOTE:- Angle Iron Brackets for resting of AC components/compressors at ext wall of bed rooms complete all as specified and as directed.

S&F Brass chromium plated bottle traps,32mm bore for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed, complete all as specified and as directed.

S&F towel ring of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and as directed.

S&F 18/19 mmm thick colour solid PVC prelaminated board fixed to timber frame work as in cup board shutter/shelves and similar items fixed in repair complete all as specified and directed.

S&F Auto closing hinges 35mm of 0 Crank (KH-001 or 8 Crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete all as specified and as directed.

S&F Ball bearing runners 45mm Telescopic (KTS-20) full extension load capacity 50 Kgs, fixed in repairs complete all as specified and as directed.

S&F chromium plated stainless steel wire basket (AISI 304 grade) non magnetic multilayer feuba nickel chrome plated for multipurpose utensils container with (storage basket) pull out type for large utensils size 480x500x150 mm of Grade 304 with necessary fixing clips etc complete all as specified and directed.

S&F chromium plated stainless steel wire basket (AISI 304 grade) non magnetic multilayer feuba nickel chrome plated for multipurpose utensils continer with (Cup and Saucers Basket)) pull out type,size 380x500x100 mm of Grade 304 with necessary fixing clips etc, complete all as specified and directed.

S&F chromium plated stainless steel wire basket (AISI 304 grade) non magnetic multilayer feuba nickel chrome plated for multipurpose utensils container with (Plate Basket)) pull out type,size 380x500x100 mm of Grade 304 with necessary fixing clips etc,complete all as specified and directed.

S&F chromium plated stainless steel wire basket (AISI 304 grade) non magnetic multilayer feuba nickel chrome plated for multipurpose utensils container with ( Cutlery Basket)) pull out type,size 380x500x100 mm of Grade 304 with necessary fixing clips etc,complete all as specified and directed.

S&F chromium plated stainless steel wire basket (AISI 304 grade) non magnetic multilayer feuba nickel chrome plated for multipurpose utensils container with ( Grain Trolley Basket)) pull out type,size 380x500x100 mm of Grade 304 with necessary fixing clips etc, complete all as specified and directed.

S&F chromium plated stainless steel wire basket (AISI 304 grade) non magnetic multilayer feuba nickel chrome plated for multipurpose utensils container with ( Bottle Pull out Basket)) pull out type two self,size 380x500x100 mm of Grade 304 with necessary fixing clips etc, complete all as specified and directed.

ROAD- Surface dressing n.exc 15cm deep and getting out in hard / dense soil all as specified and as directed

M&L for 75 mm thick PCC 1:3:6, type C-2 (using 40 mm graded aggregate) as in sub base all as specified and as directed

M&L for Chequered cement concrete tiles 30 Cm x 30 Cm x 25mm thick, with grey pigment cement and pigments set, jointed and pointed in neat cement slurry as in floors complete all as specified and as directed

M&L for sand filling under paver blocks including watering and consolidation all as specified and as directed

M&L for rubber mould machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness,M-35 Grade with grey cement and pigment complete all as specified and as directed

Removing excavated soil n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point all as specified and as directed(Road/path-240.60cum&Chain link fencing-233.14cum)

M&L for PCC 1:2:4 (20mm graded aggregate) type B-1 in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed (Road/path-23.50cum&Chain link fencing-31cum)

Chainlink Fencing&Gate- Dismantling fencing wire mesh, any type

Dismantling RCC fencing posts or struts of any section embedded in concrete, including taking out embedded portion and making good disturbed ground complete all as directed

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cmall as specified and as directed.

Material and labour for plain cement concrete (1:3:6) type C-2 for foundation concrete (using 40 mm graded agg) any thickness, size or shape in pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and as directed.

Excavating in trenches for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc not exc 10 Sqm on plan and not exc 1.5 m in depth and getting out in hard / dense soil complete all as specified and as directed.

Material and labour for plain cement concrete (1:4:8) type D-2 as in foundation concrete (using 40 mm graded stone agg) complete all as specified and as directed.

M&L for Reinforced cement concrete1:2:4(nominal mix),type B1 using 20 mm graded aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc complete all as specified and as directed.

Material and labour for reinforced cement concrete 1:2:4(nominal mix), using 20 mm graded aggregates in columns, pillars, piers, posts, struts etc. complete all as specified and as directed.

Material and labour for form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sided and soffits of foundation and plinth beams and similar work, vertical or to batter for rough finished surfaces or concrete, flat, complete all as specified and directed.

Material and labour for form work to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces of concrete, square, rectangular or polygonal complete all as specified and directed.

Supply and fixing mild steel TMT bars 10 mm dia and over, cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified and as directed.

Supply and fixing mild steel TMT bars 5 mm dia and over up to and including 10 mm dia. in stirrups, spacers, binders etc. cut to length, bend to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified and as directed.

Supply and fixing mild steel round bars 10 mm dia, Fe 290, Grade E-165, cut to length, bend to shape required and hooking ends for fixing to chain link fencing complete all as specified

Supply and fixing mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screw end to be fitted with washers and one hexagonal or square nut, diameter of shank 11 to 15 mm, length of bolt not exc. 5 cm long, complete all as specified and as directed.

Supply and fixing Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing FE-410-W, (Gde-E-250) quality -A, complete complete all as specified and as directed.

Supply and fixing posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Supply only chain link MS galvanised fencing 3 to 4 mm dia wire, size of mesh 50 x 50 mm, made up to mattress or cages, all as specified and as directed

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc, including provision of binding wire complete all as specified and as directed.Note :- (a) Supply of Galvanized steel wire chain link fecncing, mild steel round bars, mild steel flat, nuts, bolts & washers will be measured and paid separately.

Material and labour for rendering 15 mm thick cement plaster in cement mortar (1:4) on fair faces of brick work or concrete surface in walls, rendering is to be finished even and smooth (without using extra lime or cement) complete all as specified and as directed.

Material and labour for rendering 5 mm thick on fair faces of concrete surfaces in CM 1:3 rendering is to be finished even and smooth (without using extra lime or cement) complete all as specified and as directed.

Material and labour for preparation of new wall surfaces and applying two coats of cement based paint over a coat of alkali resistance primer complete all as specified and directed by the Engr-In-Charge

Material and labour for applying two coats of Aluminium paint over a coat of red oxide zinc chrome primer on new steel and iron surface not exceeding 10 cm in width or girth including preparation of surfaces complete all as specified and as directed.

Returning, filling in of soil including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

Schedule 'A' Part - II (E/M ITEMS):- Taking down sub main wiring any description along with PVC conduit/Casing capping/wooden batten/metal conduit and made good the disturbed surface all as specified and as directed

Taking down carefully Ceiling Fan any size & type and refixing the same after painting , in situ with one coat of synthetic enamel paint by spraying including provision of cable from ceiling rose or connector to fan and filling cavities with filler after cleaning all dust etc all as specified and directed by Engr-in-charge.

Taking down Exhaust fan any size & type and refixing the same after painting , in situ with one coat of synthetic enamel paint by spraying including provision of cable from ceiling rose or connector to fan and filling cavities with filler after cleaning all dust etc all as specified and directed by Engr-in-charge.

Taking down old aluminium point wiring (light, fan, socket or power) complete fittings such as switches,sockets,ceiling rose, pendents, regulators etc complete as ordered and removing retrived materials and making good the disturbed surface of wall, floors, ceiling etc. complete all as directed and specified.

M&L for point wiring with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with copper conductor drawn in and incl non metallic rigid PVC conduit and all conduit accessories, concealed on walls suface or ceiling etc., with suitable clamps/ saddles, including provision of suitable 1.6 mm thick MS pressed steel terminal boxes suitable to modular sockets/switches including modular cover frame and plate in wall for housing of modular switiches, sockets, fan regulators etc and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuity conductor all as specified and as directed for One light point controlled by one switch

All as per item No. 219 above but for One ceiling fan/exhaust fan point controlled by one way switch

All as per item No. 219 above but for one light point controlled by two way switches

All as per item No. 219 above but for One socket point on Independent board

All as per item No. 219 above but for One socket point on same board with other switches

All as per item No. 219 above but for One call bell point controlled by one bell push

Description all as per item No 219 above but with copper conductor cable FLRS 2.5 sqmm for one 3 pin socket outlet,15 Amps concealed and including provision of 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board complete all as specified and as directed.

S&F Switch modular flush type, single pole, one way, 6Amps, one module complete all as specified and as directed

S&F modular switch piano flush type 5 Amps, single pole two way complete all as specified and as directed

S&F modular bell push 6 Amps 230 Volts complete all as specified and as directed

S&F ceiling rose surface PVC / Polycarbonate isolated body 65x50 mm type with three terminals all as directed.

S&F modular socket 6 Amps 2/3 pin combined 2 module, flush type all as directed

S&F modular switch socket outlet 2/3 pin 6 amps 240 volts, flush type all as directed

S&F modular switch socket outlet multi purpose , 3 pin, 16 Amps and 1 pin, 6Amps controlled by one switch all as directed

S&F modular fan regulator electronic type with 5 step control suitable for 1200/1400 mm ceiling fan all as directed

S&F Call bell 230 volts single pole A/C fancy type Ding Dong bell including taking out old unserviceable bell all as directed

M & L for lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as directed

S&F LED Lamp 5W (Make - Hevells Cat Part No-LHLDEUEEMC8R005 or equivalent make as per List of Manufacturers here-in-after)

S&F in repairs Wall mounted light fitting LED batten, extruded aluminium heat sink provided for effcient heat dissipation & integrated electronic driver with 18 W LED (4 ft) lamp including disconecting, removing, and connecting into electric circuit and testing complete all as directed . ( Make - Havells,Cat Part No : LUMILINEBS18WLED830SPCW or equivalent make as per List of Manufacturers here-in-after)

S&F Decorative LED wall light fitting stainless steel,rust free fixture with white glass diffuser including 15 W LED lamp complete all as specified and as directed. ( Make : Havells Cat Part No: LHFOAID1TZ11040 or equivalent make as per List of Manufacturers here-in-after)

S&F in repairs mirror light fitting LED luminares New generation energy saving IP65 Mirror light luminaire with opal diffuser with 10W LED including disconecting, removing, and connecting into electric circuit and testing complete all as directed ( Make: Havells ,Cat Part No : LUMILINEBS9WLED830SPCWH or equivalent make as per List of Manufacturers here-in-after)

S&F in repairs bulkhead light fitting LED luminares Environmental friendly, energy efficient,aesthetically designed, decorative round moulded body, wall/ceiling light LED fixture with opal diffuser to give glare free light with 10W LED lamp including disconecting, removing, and connecting into electric circuit and testing complete all as directed. ( Make: Havells ,Cat Part No : RUGBYNEONFT 10WLED860 SSYMTOPC or equivalent make as per List of Manufacturers here-in-after)

S&F in repairs security light fitting LED luminares New generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP65 roadway luminaire with high power LED as light source with 25W LED 5000K lamp including disconecting, removing, and connecting into electric circuit and testing complete all as directed.. ( Make: Havells ,Cat Part No : ENDURA PEARL SL 25LED757SASYTOPC or equivalent make as per List of Manufacturers here-in-after)

M&L for GI Bracket bend to shape in cold or hot 25mm bore medium grade and 1.50 M long with suitable MS clamps and nuts bolts etc, for fixing security light fittings to Bldgs complete after taking down the unserviceable GI bracket all as directed.

Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings steps, chills, sunshades, shelves, lintels etc and cutting chases for concealed conduit wiring etc. and making good cutting exceeding 10cm but not exceeding 20cm girth complete all as specified and as directed

M&L for sub main wiring two run of 4 sqmm single core PVC insulated unsheathed cable single core multistranded copper conductor 1100 volts grade drawn through and including suitable size of non metalic PVC conduit and conduit accessories concealed on floor/wall/ surface or ceiling with suitable clamps/saddles including one run of 4.0 sqmm PVC insulated copper cable for continuous earth conductor connected to common earth dolly complete all as specified and as directed. Note:- Two runs of FRLS cable, One run of earth continuity conductor cable and one run of non metalic PVC conduit shall be measured as one unit length / running metre.

M&L for sub main wiring two run of 6 sqmm single core PVC insulated unsheathed cable single core multistranded copper conductor 1100 volts grade drawn through and including suitable size of non metalic PVC conduit and conduit accessories concealed on floor/wall/ surface or ceiling with suitable clamps/saddles including one run of 6.0 sqmm PVC insulated copper cable for continuous earth conductor connected to common earth dolly complete all as specified and as directed. Note:- Two runs of FRLS cable, One run of earth continuity conductor cable and one run of non metalic PVC conduit shall be measured as one unit length / running metre.

M&L for sub main wiring two run of 10 sqmm single core PVC insulated unsheathed cable single core multistranded copper conductor 1100 volts grade drawn through and including suitable size of non metalic PVC conduit and conduit accessories concealed on floor/wall/ surface or ceiling with suitable clamps/saddles including one run of 10.0 sqmm PVC insulated copper cable for continuous earth conductor connected to common earth dolly complete all as specified and as directed. Note:- Two runs of FRLS cable, One run of earth continuity conductor cable and one run of non metalic PVC conduit shall be measured as one unit length / running metre.

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete one single pole MCB 20/30 Amps, 240V complete concealed on wall and connecting with all connections including taking out the existing U/S enclosures all as directed by Engr in charge

S&F of sheet metal enclosure with distribution board double Door 230 volts SPN 8 way with suitable Bus bar and provision for MCBs/ isolators fixed on wall and connecting with all connections including taking out the existing U/S DB all as directed by Engr in charge

S&F of sheet metal enclosure with distribution board 230 volts SPN 4 way with suitable Bus bar and provision for MCBs/ isolators fixed and including wooden board fixed on wall and connecting with all connections including taking out the existing U/S sheet metal enclosure all as directed by Engr in charge

S&F of vertical type sheet metal enclosure MCB DB TPN 4 ways double door type including 125 Amps MCCB 4 Pole 415 V,16 KA incomer with suitable bus bar surface/concealed on wall and connecting with all connections including taking out the existing U/S DB all as directed by Engr in charge

S&F of vertical type sheet metal enclosure MCB DB TPN 4 ways double door type including 63 Amps MCCB 4 Pole 415 V,16 KA incomer with suitable bus bar surface/concealed on wall and connecting with all connections including taking out the existing U/S DB all as directed by Engr in charge

S&F MCB SP 6 to 32 Amps, 240 volts, 10 KA, 50HZ, 'C' curve complete all as specified and directed.

S&F MCB SPN 6-32 Amps, 240 volts 10 KA 50 HZ complete all as specified and directed.

S&F wall mounted fan 400 mm sweep esteem type along with speed control complete with all accessories including mounting fabricated MS flat and anchor fastner nuts and bolts all as per design given by Engr-in-Charge all as directed.

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, copper winding of sweep 250mm and connecting including provision of cable 3 core of 0 .5 sqmm from ceiling rose to fan all as directed.

S&F BLDC ceiling fan for 5 star rating of size 1200mm sweep complete with down rod including cable 3 core of size 0.5 sqmm from ceiling rose to fan, writing MES No 2cm height with synthetic enamel black paint complete all as specified and as directed.

S & F ceiling fan hook made out of MS bar 10 mm dia bar bend to shape for hanging ceiling fans all as directed.

Material and labour for earthing complete with GI plate electrode 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of plate not less than 1.5m below ground level connected to earth lead of 4.0 mm GI wire means of bolts, nuts, washers of galvanized all as shown in electrical plate No.3 of SSR Part-I including necessary excavation and earth work. PCC 1:3:6 type C1 chamber, RCC cover in 50mm thick 1:2:4 type B1 with 8mm CTD 140mm centre to centre with suitable handle, watering pipe 20mm dia light grade pipe with funnel, charcoal salt connected to earthing test point all as specified including testing and commissioning on completion.Note: (i) Cost of GI earth wire and GI protection pipe upto 7.5mtr length shall be deemed to be included in the rate quoted for this item. (ii) The unit rate shall also includes for Wire mesh, funnel, excavation, returninng & filling, PCC chamber pit, RCC cover & test point

M&L for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop earthing etc. as required GI wire 4.0 mm thick for inter connecting of earth electrodes complete all as specified and as directed.

S&F in repairs of PVC connection pipe 15mm dia 450mm long heavy duty suitable for hot / cold water with two brass union and washer complete all as directed.

Removing carefully tamper proof electronic meter and handing over in AGE E/M store yard including refixing the same at the same location or at new location all as directed by Engr-in-Charge

Disconnecting,removing carefully electric water heater of capacity 50/25 Ltrs and handing over in AGE E/M store yard and refixing the same including provn of suitable nut and bolts grouted in wall complete including connection all as directed by Engr-in-Charge

S&F electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate,NRV, including grouted with suitable size of nut & bolts,making good the surface, PVC connection piece complete all as specified and directed

S&F PVC non metallic rigid conduit not less than 20 mm dia with its conduit accessories concealed on floor/wall/ surface on ceiling with suitable clamps/saddles rigid non-metallic PVC conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends,elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.complete all as specified and directed

S&F modular telephone socket 1 module ( Make : Havells Crabtree,Cat Part No: ACWKNWW111 or equivalent make as per List of Manufacturers here-in-after)

Taking down carefully old serviceable wall mounted LED fittings of any size for reuse at site or carrying to the store all as directed and refixing the same fittings including connecting up the three core flexible copper cable of suitable size complete all as directed.

Taking down carefully old serviceable DECORATIVE LED fittings of any size for reuse at site or carrying to the store all as directed and refixing the same fittings including connecting up the three core flexible copper cable of suitable size complete all as directed.

Taking down carefully old serviceable MIRROR LED fittings of any size for reuse at site or carrying to the store all as directed and refixing the same fittings including connecting up the three core flexible copper cable of suitable size complete all as directed.

Taking down carefully old serviceable BULKHEAD LED fittings of any size for reuse at site or carrying to the store all as directed and refixing the same fittings including connecting up the three core flexible copper cable of suitable size complete all as directed.

Taking down carefully old serviceable SECURITY light LED fittings of any size for reuse at site or carrying to the store all as directed and refixing the same fittings including connecting up the three core flexible copper cable of suitable size complete all as directed.

Taking down carefully old serviceable MCB's SP of any size for reuse at site or carrying to the store all as directed and refixing the same MCB's including connecting complete all as specified and as directed.

Taking down carefully old serviceable MCB's SPN of any size for reuse at site or carrying to the store all as directed and refixing the same MCB's including connecting complete all as specified and as directed.

S&F 4 Pole MCCB 200 to 250 Amp 50 HZ 415 V with rupturing capacity 35 KA all as specified and directed ( Make : Havells , Cat Part No : IHD2HTBFO250 or equivalent make as per List of Manufacturers here-in-after)

S&F modular White cover plate with frame, 1 module complete all as specified and as directed

S&F modular Metal flush box 1 module, all as specified and as directed

NOTE:- (a) Quantities of similar items of various schedules of BOQ have been clubbed together and the breakdown of the quantities have been mentioned in the relevant items (b) Parts to which Sch'A' is divided is for purpose of information/Guidance only

HARI ENTERPRISES

C R R CONSTRUCTIONS

UNITED TECHNO PROJECTS PVT LTD

Phoenix Infra

RNR CONSTRUCTIONS