REPAIR/RESURFACING OF ROAD, ROAD FURNITURE AND ROAD MARKING AT BEG AND CENTRE, AJIT VIHAR, TB II KIRKEE UNDER AGE B R II IN GE CENTRAL KIRKEE

Amount

M & L Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat with bituminous emultion RS-1 @ 5 kg per 10 sq m, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings). depth of potholes exc 30 mm complete all as specified and as directed by Engr-in-Charge.

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc 400 sqm exc 50mm and n.exc100 mm deep, all as specified and directed by Engr-in-Charge.

M&L for 7.5 CM thick (compacted thickness) WMM, with coarse aggregate of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size) using granite, trap or basalt stone of grading spread and rolled and consolidated to gradient and camber required including rolling by using mechanical power road roller of 8 to 12 tonne cpacity complete all as specified and as directed by Engr-in-Charge.

All as per item No 3 above but except materials. Note: Serviceable material obtained from item No 2 shall be used under this item.

Preparing unsurfaced wet mix macadam (WMM) surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc & M&L for applying evenly a priming/tack coat with bituminous emultion RS-1 at 10 Kg/ 10Sqm with sprayer over existing surface etc complete all as specified and directed by Engr-in-Charge.

M&L for premixed bituminous macadam with binder content @ (VG-30) 4% by weight of total mix (Job Mix) laid / rolled with 8 to 12 tonne power roller and compacted to required gradient and camber (consolidated thickness 75 mm or less as per site requirement of site ) complete aall as specified and directed by Engr-in-Charge. Note :- The contractor quoted the rate shall be deemed to include the follwing elements:- (i) The contractor shall get the mix design done through Govt approved lab and shall get the same got approved from GE before incorporating in the work. (ii) Contractor shall submit the authenticated weigh batch receipt for every load of materials brought at site duly marked vehicle Number. (iii) In case variation in bitumen content as per approved mix design in comparison with the bitumen in qty shall be adjusted with price adjustment

M&L for applying evenly a priming/tack coat with bituminous emultion RS-1 at 3 Kg/ 10Sqm with sprayer over existing surface etc complete all as specified and directed by Engr-in-Charge.

M & L for preparing old existing bituminious surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc & M&L for applying evenly a priming/tack coat with bituminous emultion RS-1 at 5 Kg/ 10Sqm with sprayer over existing surface etc complete all as specified and as directed by Engr-in-Charge.

M&L for bituminous premixed asphaltic semi-dense concrete using paving bitumen (VG-30 grade), 30mm thick (Consolidated thickness) using binder content @ 5.5% by weight of total mix (Job mix), using mechanical paver rolled with 8 to 12 tonne power roller & compacted to required camber and gradient complete complete all as specified and directed. Note :- The contractor quoted the rate shall be deemed to include the follwing elements:- (i) The contractor shall get the mix design done through Govt approved lab and shall get the same got approved from GE before incorporating in the work. (ii) Contractor shall submit the authenticated weigh batch receipt for every load of materials brought at site uly marked vehicle Number. (iii) In case variation in bitumen content as per approved mix design in comparison with the bitumen shall be adjusted with price adjustment

S & F in repairs for solar stud made out of aluminium housing and precast construction solar powered by SIEMENS monocrystal solar panel 2 V 120 MA type of battery NI-CD 1.2 V 250 MAH and flash rate 2 Hz or 70 Hz view distance over 300 mtr fotted with 2 HZ EL-805-3 pieces each side on 2 ends total 6 pieces LEDs, flashing upto 12 hours of light at night and solar battery automatically charge in day/sun light duly fixed with cement and hardner size of stud 125 X 125 X 85 mm in red/yellow colours complete all as specified and as directed by Engr-in-Charge.

S&F in repairs for round solar delinator of red coloured made out of aluminium housing and 1100 mm height precast construction solar powered by SIEMENS monocrystal solar panel 2 V 120 MA type of battery NI-CD 1.2 V 250 MAH and flash rate 2 Hz or 70 Hz view distance over 300 mtr fotted with 2 Hz EL-805, LEDs, flashing upto 12 hours of light at night and solar battery automatically charge in day/sun light duly fixed with including excavation of post holes of size 250 X 250 X 500 mm in soil and fixed in PCC 1:3:6 type C1 (using 20mm graded stone aggregate) complete all as specified and directed by Engr-in-Charge.

S&F in repairs in cat eyes ABS body with scratch and abrasion resistant micro prismatic polycarbonate and ultrasonically welded lens, temperature resistant body and lens, size 90 mm X 110 mm X 17 mm (Red/yellow colours) complete all as specified and directed by Engr-in-Charge.

M&L for preparation of New/existing black bituminous road/concrete surface and painting lines dashes (continuous/interrupted), arrows,letters etc on road 2.00 mm thick and exc 10cm wide with one coat of hot applied white/golden/yellow auto retro-reflective thermoplastic road marking paint with reflectory glass beads on bituminous road all as specified in clause 803.40 of MOSRT&H specification over a coat of self primer using special applicator machine as per IRC pattern including cleaning of road surface free from dust & moisture and putting in duly mixed with 8% mica sign special applicatore machine complete all as specified and as directed by Engr-in-Charge.

Demolition of precast concrete block walling built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles as in kerb stone complete all as specified and as directed by Engr-in-Charge.

S&F informatory reflective Sign boardn of size 900mm x 1200mm each single side writing with stainless steel pipe frame on 2 mm thick Aluminium Composite Panel (ACP) sheet size as fit to board with high intensity prismatic reflecting tape including 2 Nos of of stainless steel post in each board having 76 mm dia/square post with 16 guage steel duly polished for best shine fitted round globe on top of height 2.1m each. complete all as specified by Engineer-in-Charge. Note:- Cat No SE-1007 at suneye product or equivelent make shall be approved by GE.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed by Engr-in-Charge.

Demolition of cement concrete of any description and in any positon not other specifically provided for as in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed by Engr-in-Charge.

M&L 75mm thick cement concrete 1:2:4 type B2 , using 40mm graded stone aggregates as in sub base complete all as specified and as directed by Engr-in-Charge.

M&L for 60mm thick machine pressed precast concrete interlocking paver block refelctive type coloured,with grey cement and pigment any shape and size conforming to IS-15658-2006 of M-35 grade with glossy finish colour shade in floor/pavement laid over and including 50mm thick crushed stone sand cushioning laid dry to the profile including dismantling old tilescomplete all as specified and as directed by Engr-in-Charge.

M&L for two coats Painting lines, dashes, arrows, letters,etc. on roads, pavements, Kerb stones and the like exc 10cm wide with road marking paint, white or golden yellow including cleaning and preparation of existing surface or on new surface complete all as specified and as directed by Engr-in-Charge.

AADARSH BHARAT ENVIRO PRIVATE LIMITED

MOHANLAL MATHRANI CONS. PVT. LTD.

Sunshine Ventures