WBPWD/AE-NSESD/NIQ-31/2025-26

Amount

Electrical Installation work Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Polycab / Gloster /Havells/ Finolex / KEI/RR Kabel) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Legrand: Myrius/Arterior/ L&T/ABB as approved by E.I.C) fixed on Modular GI switch board with top cover plate and 2 no. suitable size “Ph & N” copper bar & earthing attachment fixed on wall incl. mending good damages to original finish. [E-24/1]

a) Avg. Run-8mtr [E-24/1(c)]

b) On board[E-24/3/(a)]

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Polycab / Gloster /Havells/ Finolex / KEI/RR Kabel) of the following sizes in the prelaid polythene/PVC rigid pipe and by the prelaid GI fish wire and making necy. connection as required [E-9/1]

i)3 x 22/0.3 (1.5 sqmm) [ E-9/1(b)]

ii)2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC [ E-9/1(s)]

iii) 2x56/0.3 (4 sqmm) + 2x36/0.3 (2.5 sqmm) as ECC [ E-9/1(v)]

Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] of following sizes on wall, ceiling with saddles and other accessories as required and mending good damages to building works [E-16/7]

a) 20mm size [E-16/7(a)]

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. [F-9]

i) 2.5sqmm [F-5/9(i)]

ii) 4 sqmm [F-5/9(ii)]

Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works. [E-17/1]

2 Row 18 Module [E-17/1(f)]

6 Module [E-17/1(b)]

4 Module [E-17/1(a)]

Supply & Fixing 240 V 6 A Modular type switch (Legrand: Myrius/Arterior or equivalent model of Crabtree/ROMA approved by EIC)on existing GI Modular type switch board having top cover plate and making necessaryconnections as required. [E-17/3(a)]

Supply & Fixing 240 V 16 A Modular type switch(Legrand: Myrius/Arterior or equivalent model of Crabtree/ROMA approved by EIC)on GI Modular type switch board having top cover plate and making necessary connections as required [E-17/3(b)]

Supply & Fixing 240 V, 6A, 5 pin Modular type plug socket (Legrand: Myrius/Arterior or equivalent model of Crabtree/ROMA approved by EIC), without switch & plug top, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [E-17/4(a)]

Supply & Fixing 240 V, 6/16 A, 5 pin Modular type plug socket (Legrand: Myrius/Arterior or equivalent model of Crabtree/ROMA approved by EIC), without plug top and switch, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [E-17/4(b)]

Supply & Fixing 240 V, 25A Modular switch type SP MCB (C-Curve) (Brand approved by EIC) on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [E-19/9(a)]

Supply & Fixing 240 V, 16/6 A, 3 pin Modular type plug socket with 16A Modular type switch of grey/brown/other colour as approved by the authority/E.I.C (Legrand: Myrius/Arterior or equivalent model of Crabtree/ROMA approved by EIC), without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [E-18/9(b)]

Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board [D-13/20(a)]

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with suitable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length [C-2/17]

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter:

(a) 23 cm (9")[C-4/28(a)]

Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length [C-4/29]

Fixing only SPN MCBDB (4 to 16 way) on flat iron frame on wall [C-1/3]

Supply of 4'ft LED Twin batten/Metal frame fittings incl. 2nos. 18W Polycarbonate/Aluminium LED tube having luminoius efficacy of 100lm/W [Philips/Crompton/ Wipro or manufacturer with own NABL accredited Lab with valid Test certificate as approved by E.I.C]

S & F of Recess Mounted square LED luminaire Wattage: Max. 18W Lumen output: Min. 100 lm/W, 1800lm/18W, PDC housing. Make: Crompton, Philips, Wipro or manufacturer with own NABL accredited lab with valid test certificate

S&F recessed mounting 2ftx2ft square 36 Watt LED luminaire of warm-white or cool day light(as per choice of the authority/E.I.C) with glare-free illumination having luminous efficacy- 100lm/W and complete with all accessories (Make : Crompton /Phillips / Wipro or manufacturers with own NABL acreedited Lab having valid Test certificate as approved by E.I.C] incl. inter connection & necy. fixing arrangement as per direction of EIC.

Supply of 18''(450 mm) Sweep heavy duty best quality AC Wall Bracket Full metal body Fan (Make : Orient / Crompton as approved by E.I.C)

Supply of 225 mm Light duty Full metal body Exhaust Fan (Make : Orient / Crompton / EPC as approved by E.I.C)

Supply & fixing of Blank Plate for modular box

Supply & fixing of Indicator for modular box

S&F of 32A timer controlled DB for 1 no. single phase AC in SS double door 12 way DB enclosure (Make: L&T/Legrand/ABB(E)) with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish. All connections should be made by copper wire of 4mm2 & 1.5mm2 and finishing with dowells solderless socket by crimping method incl. necy. connection & provision for earthing attachment incl. Ferruling & marking with S&F following Electrical accessories as per direction of EIC [for 2/1.5 TR AC] i) 240V, 32A DPMCB C curve breaking capacity 10kA - 1 no. ii) 240V, 22A, 2P Contactor with Auxilary Contact - 1 no. iii) 25A, 250V AC ON-OFF-ON SPDT toggle switch with marking-1no. (for Auto/Manual option). iv) 24Hr x 7 days programmble Digital timer - 1 no. v) On & Off Indicator LED lamp and Start & Stop push button switch (G&R)-2 set. vi) Din rail mounted Terminal Block for Outgoing & Incoming - 4 nos. vii) 6-32 A SP MCB C curve breaking capacity 10kA-1 no.

Supply & fixing automatic single phase AC starter of 21Amp capacity equipped with Timecheck, Voltcheck & Ampcheck and 3-digit display (Make- Electron-model no.-OPL-3+ or equivalent model of LT/Legrand as per dierction of E.I.C) to be fixed on wall with all fixing accessories complete as to G.S

Supply & laying 1.1 KV grade 3 core 4 sqmm flexible copper Cable with screw, saddle,drill machine nut bolt etc all necessary items needed for connection. (from starter to A.C outdoor Connection)(make: Havels/KEI/Polycab/Finolex as per approved by EIC)

Add. G.S.T.@ 18% on total value.

Add. LWC.@ 1% on total value

S. A. ENTERPRISE (BID ID -6647193)

ALPHA ELECTRICALS (BID ID -6640852)