COMPREHENSIVE REPAIR TO CERTAIN OTM ACCN AT SANGRUR UNDER GE (S) PATIALA

Amount

'Notes: (i) Please refer Schedule 'A' Notes of tender documents.

Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed.

Taking down chowkat with shutters (without taking off shutter ) area exc. 1.5 sqm but n exc. 4 sqm each complete all as specified and directed.

Taking down door/window shutter/cupboard shutter with frame (without taking off shutters from the frame) area up to1.5 sqm each complete all as specified and directed.

Taking down shutters of any description not exceeding 1 Sqm each complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed.

M&L for refixing of shutter in the same opening not exc 1 sqm each complete all as specified and directed.

M&L for refixing of shutter in the same opening exc 1 sqm but not exc 2 sqm each complete all as specified and directed.

Demolition of cement concrete in ground floor and paving n.exc 15 cm thick (below or above ground level) etc complete all as specified and directed.

Demolition of Concrete reinforced of any description and in any position not otherwise specifically provided for complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of Brick walling, stone masonary built in cement mortar including all quoins archas pillars etc and pre-cast block walling etc complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and as directed.

Dismantling water tank and removing to store exeeding 250 but n.exc 500 ltrs complete all as specified and directed.

Dismantling water tank and removing to store exeeding 500 but n.exc 1000 ltrs and removing to store complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and directed..

Dismantling of 110 mm dia CI/PVC pipes pipe jointed in cement mortar and taking out of trenches if required complete all as specified and directed.

Dismantling plain corrugated steel/AC sheeting any gauge thickness including Nainital and similar pattern complete all as specified and directed.

Dismantling of wall and ceiling board any thickness including cover fillets complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D 2 , (Using 40mm graded stone aggregate) in foundation etc complete all as specified and directed.

S&F for ERW or Induction butt weld M.S. tube black conforming to IS 1161-1979 grade Yst 240 including fabrication and erection and fixed in position complete all as specified and directed.

S&F for rolled mild steel section in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming to Fe-410-W (Gde E-250,quality- A) complete all as specified and directed.

M&L for reinforced cement concrete nominal mix 1:1.5:3 ( using 20 mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for reinforced cement concrete nominal mix 1:1.5:3 using 20 mm graded stone aggregate as in chajjas complete all as specified and directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, finshed flat rough finished surfaces etc.complete all as specified and directed.

M&L for Formwork to chullah hoods, chajjas, troughs and similar items including edges, finshed flat rough finished surfaces etc.complete all as specified and directed. complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Ditto- as per Item No. 28 here-in-before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

M&L for brick work with Fly ash bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and directed (as in manhole).

All as per Item no.30 but except brick complete all as specified and directed.

M&L for Providing precast cement concrete type 1:2:4 type B-1, (20 mm graded aggregate) as in landing, cover slab (for manholes etc) chullah woods, chajjas, water trough mangers, shelves, and similar articles with plain faces and steeing in cement mortar 1:4 complete all as specified and directed.

M&L PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in surface channel and drain complete all as specified and directed.

M&L for extra for forming fair finished drain and channel 30 cm inner grith in cement concrete using extra cement in forms mould mitred/stopped ends complete all as specified and directed.

Supplying and applying for two component elestomeric acrylic polimer modified cementitious water proofing coating on brick wall SmartCare Damp Block 2k or approved eqivalent having 1005 elengotation as per ASTMD412 , resisting 5 bars hydrostatic pressure as per DIN 1048 reduction to rapid chloried 70 as per ASTMC 1202 ,crack bridging up to 1.2 mmas per ASTM 4548.5 The Coating shall havefood grade Certificate from laboratories like CFTRI, will be applyon both Positive & Negative side and resist upto 5 Bars of Hydrostic pressure .The mixing ratio of coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing etc and sand will be sprinkled after coating complete all as manufacture specification and as directed. Note : Taking down plaster and rendering plastering work will be measured and paid seperately. Cost of Steel props adjustable (Suspended/Supported) Scaffolding (6m -7 m) Hight , safety equipment for labours (Belt, hook, Helmet) shall deemed to be included in quoted rates.

M&L for providing mixing & applying two component Epoxy resin concrete bonding coat on prepared RCC surface as per manufacturer instruction including preparation of surface by chipping and throughly cleaning of surfaces complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces with CM 1:4 finished even and smooth without using extra cement in external surfaces WPC shall be mixed complete all as specified and directed. Note-WPC Shall be measured and paid Separately

M&L rendering 15 mm thick on other than fair faces of brick work or concrete surfaces with CM (1:6) finished even and smooth without using extra cement in internal surfaces complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of oil emulsion distemper over a coat of 3 mm thick wall care putty complete all as specified and as directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of suitable primer complete all as specified and as directed.

M&L for PCC 1:2:4 type B-0 (Using 12.5 mm graded stone aggregates) of 25 mm thick as in leveling course ,finished surfaces even and rough to receive floor finish complete all as specified and as directed.

M&L for ceramic coloured tiles 10 mm thick (square/rectangular) area of each tile n.exc 0.38 Sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in skirting over and including 15mm thick screed beeding in CM 1:6 complete all as specified and directed.

M&L for reinforcement cement concrete (Normal mix )1:1.5:3 Type B1 (20mm graded aggregate) as Chajja and the like complete all as specified and directed.

M&L for Non Skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed bed of 15 mm thick in CM 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450X 300X 7mm thick thick over and including 10 mm thick rendering in cement mortar 1:4 as in backing coat for tiles on vertical surfaces,set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Prepolished chequered cement concrete tiles 30cmx30cmx25mm thick, set, jointed and pointed and in need cement slurry in floor with grey cement and pigment and including over screed bed or bedding layer of mortar 20 mm thick laying floor finished in cement mortor 1:6 complete all as specified and directed.

M&L for PCC type C-1, 1:3:6 (using 20 mm graded crushed stone aggregates) as in plinth protection; 75 mm thick; finished even and smooth without using extra cement complete all as specified and directed.

S&F for Pressed steel frames for doors with one or more rebates (Size of frame 125x60mm) including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, complete all as specified and directed.

S&F for Pressed steel frames for doors with one or more rebates (Size of frame 105x60mm) including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, complete all as specified and directed.

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F for 35mm thick IInd class hard wood glazed and skelton door shutter divided into square, open rebated and prepared to receive glass/gauge etc (without sash barsi) edges of framing plain chamfered or rounded , fitted with cut and mitred beads for securing glass/gauge etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.20 (a) complete all as specified and as directed.

S&F for Solid PVC door frame of size 50 mmx47 mm made out of 5 mm plain colour PVC sheet re-inforced with M.S square tube, suppyling and fixing in opening as per specification and drg complete all as specified and directed..

S&F for factory made solid panel PVC moulded door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour of PVC sheet for top rail lock rail and bottom rail, on either side & gap insert for top rail bottom rail panelling of plain colour PVC sheets to be fitted in MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppying and fixing in the frame at site as per specification & drawing complete all as specified and directed.

M&L for providing and fixing factory made extruded aluminium casement windows with 50 micron powder coating doubled panelled and double shutters consisting of frame and mullion of 101.60X44.45X1.29 mm and shutters made of 63.5X31.75X1.29mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperature in inner shutters complete fixed in all respect as specified and directed including supply and fixing following items :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 2 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf. (c) Powder Coated Aluminium Handles 150 mm - 1 nos per leaf. Note:- For Cooler fixing arrangement 08 nos shutter Each window. (as per direction by Eng-in-Charge)

M&L for providing and fixing factory made extruded aluminium ventilators with 50 micron powder coating of frame of 63.5 X 38.10 X 1.29 mm including 5mm thick frosted glass in lower 55% portion of shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperture in upper 45% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and complete fixed in all respect as specified and directed.

S&F Aluminium anodised DG 102 "DECO" grill of size 100mm x 10mm x7mm thick, approved design for windows / ventilators with and including F/U channel, ,complete all as specified and as directed.

S&F for 5.5mm thick sheet glass of ordinary quality and glazing fixed to aluminium shutters in square n.exc 0.5Sqm in each pane complete all as specified and directed.

S&F for Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

M&L for hacking out old broken glass any thickness, size, quality and description from wooden frame, steel frame with putty or fixed with beads compelete all as specified and directed.

S&F for 3 mm thick sheet glass of ordinary quality and glazing fixed with oil putty in square n.exc 0.5Sqm in each pane complete all as specified and directed.

S&F for 4 mm thick Figured glass and glazing fixed with oil putty in square n.exc 0.5Sqm in each pane complete all as specified and directed.

S&F for butt hinges medium weight cold rolled mild steel 100mm complete all as specified and directed.

S&F for butt hinges medium weight cold rolled mild steel 75mm complete all as specified and directed.

S&F for 150 mm aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F for 100 mm aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F for 150 mm long anodised extruded aluminium alloy handles (D type), fabricated type. complete all as specified and directed.

S&F for 100 mm long anodised extruded aluminium alloy handles (D type), fabricated type. complete all as specified and directed.

S&F for 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F for 150 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F for floor door stopper of aluminum alloy body and tongue, anodized with hard drawn steel spring, fixed in floor (140mm size), fixed as in repair complete all as specified and directed.

S&F in repair for 20 mm dia chromium plated Stainless steel pipes for curtain rods including brackets(02 N0s for fixing), stops ,roller complete all as specified and directed.

M&L for preparation of new steel surfaces of any description,over 10cm in width or girth, not otherwise describedand applying two coat of synthetic enamel paint on roof over a coat of red oxide primer complete all as per specified and directed.

M&L for preparation of old painted steel surfaces of any description,over 10cm in width or girth, not otherwise describedand applying two coat of synthetic enamel paint on roof over a coat of red oxide primer complete all as per specified and directed.

M&L for Preparation of new wooden surface of any description over 10cm width or girth applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Supply & laying of 25 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 with and incl fittings fixed on walls/ceiling or laying in floors complete all as specified and directed.

Supply & laying of 32mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 with and incl fittings fixed on walls/ceiling or laying in floors complete all as specified and directed.

S&F in repair vitreous china squatting pan 'Orissa' pattern size 580x440mm with white integral footrest (excluding flushing cistern and flush pipe including making good) complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolt, flushing cistern and flush pipe) including making good complete all as specified and directed.

S&F in repair plastic water closet seat, black and white closed pattern with flat bottom and cover and mild steel chromium plated plated or aluminium hinging device complete all as specified and directed.

Supply only Liquid water proofing compound complete all as specified and directed.

S&F in repair CP Shower roses 125 mm size with or with out swivel joints any size including fixing to pipe or union complete all as specified and as directed.

S&F in repair glass self assembly consisting of 5.5 mm thick sheet glass self 12 cm wide with chromium plated bracketguard and ralling 60 cm long any size including fixing complete all as specified and as directed

S&F in repair Soap dish approx size 160x160x90mm any type including fixed to plugs with CP brass screw complete all as specified and as directed

S&F for 15mm bore Health faucet with CP felxible pipe of 1.25metre long incl making connection and fixed in position complete all as specified and directed .

S&F in repair Vitreous china wash hand basin (550X400mm) white, flat back excluding taps, waste chain and plug and porcelain stopper but including brackets , Padestral complete all as specified and as directed.

S&F in repair 32mm bore waste fittings brass chromium plated for glazed ware sinks basins etc with long screwed shanks and fly nuts, flange and bedded in red lead cement and othter end fixed complete all as specified and as directed.

S&F in repair for 10 ltrs capacity PVC valve less syphonic action type flushing cistern low level white inlet ball valve, float , flush pipe and handle including brackets and fixed complete all as specified and as directed.

S&F in repair PVC connection 15mm dia and 600mm long complete all as specified and as directed.

S&F in repair PVC waste pipe 32mm dia complete all as specified and as directed.

S&F in repair 15 mm bib tap CP fancy type with crutch or butterfly handle screwed down for iron pipe or for brass ferrules and complete all as specified and as directed.

S&F in repair 15mm bore chromium plated brass angle cock fancy type screwed for iron pipe or union and fixed complete all as specified and as directed.

S&F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

S&F for frame work only for suspended false ceiling, GI exposed ceiling suspension system of grid size 600mm x 600mm with main runner 38mmx24mm, cross tee 29mmx24mm and wall angle 24mmx24mm. to form a grid of GI system duly suspended with 4mm dia GI/MS bar hanger fixing with steel dash fastner or iron purlins from the roof with adjustment clip providing position for light fixture etc complete all as specified and as directed.

S&F for false ceiling of pre painted high pressure steam cured designer boards of size 595 mm x 595 mm x 4 mm thick fixed on GI snap grid, complete all as specified and as directed.

S&F in repair for 15mm bore brass chromium plated WHB mixer for mixing hot and cold water screwed down for iron pipe and fixed to wall complete all as specified and as directed.

S&F in repair 15mm bore chromium plated brass Piller cock fancy type screwed for iron pipe or union and fixed complete all as specified and as directed.

S&F in repair 15mm bore chromium plated brass Stop cock fancy type screwed for iron pipe or union and fixed complete all as specified and as directed.

S&F for Multi layers rotational moulded polyethylene water storage tanks of 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position including 20mm dia HD polythene float (ball) and epoxy coated aluminium rod (fly nut) screwed for iron pipe or brass ferrule complete all as specified and as directed.

S&F for Multi Layers rotational moulded polyethylene water storage tanks of 1000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position including 20mm dia HD polythene float (ball) and epoxy coated aluminium rod (fly nut) screwed for iron pipe or brass ferrule complete all as specified and as directed.

S&F in repair 20mm bore Ball Brass valve high pressurewith polythene flote and flynut ,Screwed for Iron/CPVC pipe or brass ferrule and fixed a complete all as specified and as directed.

S&F in repair CP towel rail with hook 600mm long complete all as specified and as directed.

M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in concrete bed to 110 / 75 mm dia pipes including packing under and haunching against the side of pipes after they are laid and tested complete all as specified and directed.

S&F for 110mm bore PVC (SWR) pipe single socketed any length with rubber ring joints laid in trenches or in floor including taking down complete all as specified and directed.

S&F for 75 mm bore PVC (SWR) pipe single socketed any length with rubber ring joints laid in trenches or in floor including taking down complete all as specified and directed.

M&L for 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

M&L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.

M&L for providing PRE POLISHED machine cut Kota stone slab flooring of Size 550x550x20 mm thick laid over 20 to 25 mm thick cement mortar 1:4 screed bed laid and jointed with grey cement slurry mixed with pigments to match the shade of the slab including rubbing and polishing to mirror finish complete to be fixed in any position as described and specified

Same all as per ser item No. 109 hereinbefore but on vertical surfaces as in skiting /dado of size 550x550x20 mm thick over 10 mm thick rendering in CM 1:4 all as specified and directed.

M&L for granite (of any type in two piece ) tiles 20mm thick machine cut, on kitchen platfrom bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including griding and polishing types and laid over screed bed 15 mm thick in cement mortar (1:4) complete all as specified and directed

M&L for preparing old surface of wood and wood based material of any description not otherwise described over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

M&L for preparing old surface of steel material of any description not otherwise described over 10cm width or girth and applying one coats of synthetic enamel paint over a coat of priming complete all as specified and directed.

M&L for preparation of old plastered surfaces of ceiling and applying two coats of white wash complete all as specified & directed.

M&L for complete removal of existing treatment of wall and applying two coats of distemper oil emulsion over a coat of 2mm thick wall care putty filling complete all as specified and directed.

M&L for preparing existing treated surfaces of external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc including cornices and applying two coat of cement base paint @ 5 sq.m/kg/1 coat by using following brands of cement based paint by roller complete all as specified & as directed.

M&L for cutting into existing manholes for 110 mm dia pipe,connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed.

Taking down carefully copper/ aluminium point wiring (light fan socket or power) complete along with fittings such as switches, ceiling roses, Pendants regulators Tube fittings and other Kits & fittings/conduit from surface /wall .Removing the material from work site and making good the disturbed portion/ surface of wall/ floor/ ceiling etc by using cement mortar and colour/ white wash to match with the existing surface / location complete all as specified and directed. Note- Serviceable fitting / fixtures will be reused in the work as directed.

Taking down un-serviceable main switch, DB’s insulators, DB for MCB etc of any type and any capacity and further disposal including making good the disturbed surface and matching the colour of wall with the existing colour wash / paint / distemper wherever required (as per the existing ) complete all as specified and directed.

M & L for point wiring with FRLS PVC insulated unsheathed multi-stranded copper conductor 1.5 Sq.mm (nominal area ) single core cable 1100 Volt grade drawn in and Including new rigid non metallic concealed PVC Conduit of suitable size (not less than 20 mm) in wall , surface of ceiling with all fittings, such as tee, bend, elbow, socket etc including pressed steel sunken boxes (Terminal boxes) with earth dolly,duly galvanised, with white shade frame & cover plate of suitable module for modular switch / or sockets including FRLS PVC insulated unsheathed stranded copper conductor 1.5 Sq.mm (nominal area) single core cable as earth continuity conducter to common earth and connected to earth dolly, Including making good the disturbed portion of the wall complete all as specified and directed, for the following :-

One light/fan point controlled by one 1-way switch complete all as specified and directed.

One 3/5 pin socket outlet, 5 Amp on independent board complete all as specified and directed.

One 3/5 pin socket outlet, 5 Amp on same board complete all as specified and directed.

M&L for point wiring with FRLS PVC insulated unsheathed multi-stranded copper conductor 4.0 Sq.mm (nominal area ) single core cable 1100 Volt grade drawn in and including rigid non metallic concealed PVC Conduit in wall , on surface of ceiling with all fittings, such as tee, bend, elbow, socket etc including pressed steel sunken boxes (Terminal boxes) with earth dolly,duly galvanised, with white shade frame & cover plate of suitable module for modular switch / or sockets including FRLS PVC insulated unsheathed stranded copper conductor 4.0 Sq.mm (nominal area ) single core cable as earth continuity conductor to common earth and connected to earth dolly, and making the disturbed surface good again using cement mortar & colour/whitewash matching existing painted surface complete all as specified and directed. (For AC and Geyser)

M&L for point wiring with FRLS PVC insulated unsheathed multi-stranded copper conductor 2.5 Sq.mm (nominal area ) single core cable 1100 Volt grade drawn in and including rigid non metallic concealed PVC Conduit in wall , surface of ceiling with all fittings, such as tee, bend, elbow, socket etc including pressed steel sunken boxes (Terminal boxes) with earth dolly,duly galvanised, with white shade frame & cover plate of suitable module for modular switch / or sockets including FRLS PVC insulated unsheathed stranded copper conductor 2.5 Sq.mm (nominal area ) single core cable as earth continuity conducter to common earth and connected to earth dolly,and making the disturbed surface good again using cement mortar & colour/whitewash matching existing painted surface complete all as specified and directed.(For power points)

Dismantling/Taking down existing unsv sub main wiring from batten / conduit of any size all as directed. Removing the material from work site and making good the disturbed portion/ surface of wall/ floor/ ceiling etc by using cement mortar and colour/ white wash to match with the existing surface / location complete all as specified and directed.

M &L for sub main surface wiring with PVC insulated unsheathed copper conductor cable of size 6 Sqmm single core including concealed rigid nonmetallic PVC conduit of suitable size (Not less than 25 mm dia) in wall and surface of ceiling including 6 Sqmm PVC insulated unsheathed copper conductor cable for continuous earthing form main earth dolly including making good the disturbed potion of wall complete all as specified and directed. Note :- Two run of 6 Sqmm copper cable one run of 6 Sqmm copper cable and PVC conduit will be measured as a single length

S&F Switch Modular type, 6 Amp, 240 Volts , one way complete fixed as in repair all as specified and directed.

S&F Switch Modular type, 16 Amp,240 Volts , one way complete fixed as in repair all as specified and directed.

S&F Socket outlet, Modular type, 6 Amp complete fixed as in repair all as specified and directed.

S&F Socket outlet, Modular type, 6&16 Amp complete fixed as in repair all as specified and directed.

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 A complete all as specified and directed.

S&F Fan regulator, modular type electronic step type complete fixed as in repair all as specified and directed.

S&F ceiling rose surface bakelite two to three terminal 65x50 mm complete all as specified and directed.

Supply and fixing in replacement LED luminaire 600 mm x 600 mm, 40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified & directed.

S&F in replacement Tube light fittings LED type 1x20 Watt 4 ft long incl LED tube rod and incl 3 core flexible wire 0.75 Sqmm copper cable complete all as specified & directed.

S&F in replacement Tube light fittings LED type 1X10 Watt, 2 ft long incl LED tube rod and incl 3 core flexible wire 0.75 Sqmm copper cable complete all as specified & directed.

S&F in replacement LED bulk head,10 W complete all as specified & directed.

S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F MCB DB SPN 8 Way with acrylic double door complete all as specified and directed.

S&F including flushing in wall MCB distribution board vertical TPN 4 way 415 Volts AC double door type sheet steel phosphotised powder painted with bus bar neutral earth bar including of MCB TPN, FP 100 Amp conforming to IP 43 as incomer all as complete all as specified and directed.

S&F MCB SPN 240V 40 Amps C series 10 KA complete all as specified and directed.

S&F MCB SP 240V 6 to 32 Amps C series 10 KA complete all as specified and directed.

Taking down old U/S aluminium service cable of any size from trenches/pipe/floor/walls complete all as specified and directed.

S&F PVC insulated , armoured heavy duty electric cable with aluminium conductor , 1100 volts grade , cross sectional area 25 sq mm as in repairs complete all as specified and directed

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2 mtr deep below ground level with top edge of the plate not less than 1.4 mtr below normal ground level , connected earth wire 4 sqmm by means of bolts nuts check nuts and washers of galvanised iron or steel all as shown in electrical plate No 5 connected to earthing test point all as specified or indicated including PCC pit in PCC(1:3:6) type C-1 cast iron frame 50mm thick pre cast RCC(1: 1 1/2:3) nominal mix cover slab reinforced with 8 mm dia mild steel deformed bar 15cc and suitable handle of 10 mm Dia round bar including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance not exc 50m and funnel with watering pipe wire mesh copper lugs etc GI protection pipe of size 15 mm bore including testing complete all as specified & directed.

SAHIL CONSTRUCTIONS (BID ID -3377648)

NARINDER KUMAR SONS (BID ID -3363502)

AGGARWAL & CO (BID ID -3370032)