Repair/Maintenance of existing defective indoor distribution LT panel, MCCBs and UG cables in Hangul Officers institute at BSF campus Humhama under FTR HQ BSF Kashmir

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 35 sq. mm (32mm)

2 X 25 sq. mm (22mm)

3½ X 50 sq. mm (35mm)

3½ X 70 sq. mm (38mm)

3½ X 95 sq. mm (45mm)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

Double pole

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way , Double door

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Providing and fixing 125 Amp 3 Pole pole MCCB of following specification :- Rated ultimate short- circuit Breaking Capacity Ics=100% Icu, Icu= 26 KA with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.Cat No.IHDA6OBT0125 ,conforms to IS/IEC: 60947-2 Make-Havells/L&T/C&S/ABB etc as required.

Providing and fixing 250 Amp 4 Pole pole MCCB of following specification :- Rated ultimate short- circuit Breaking Capacity Ics=100% Icu, Icu= 26 KA with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.Cat No.IHD2HOBF0250 ,conforms to IS/IEC: 60947-2 Make-Havells/L&T/C&S/ABB etc as required.

Providing and fixing 200 Amp 3 Pole pole MCCB of following specification :- Rated ultimate short- circuit Breaking Capacity Ics=100% Icu, Icu= 26 KA with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.Cat No.IHD2HOBT0200 ,conforms to IS/IEC: 60947-2 Make-Havells/L&T/C&S/ABB etc as required.

Supplying and fixing of 63 Amp DP MCB rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make-Havells/L&T/C&S/ABB etc as required.

S.I.T.C of outdoor type Compartmantalised , double door feeder pillar made out of 2mm thick MS sheet of size (450mm depth) having 300 amps, 04 nos insulated aluminium bus bar with front opening totally enclosed weather, damp proof with MS angle frame made out of 50x50x6 with 600 mm long legs suitable for 415V, 3phase 50 Hz AC supply complete with painting , connections, interconnections with aluminium conductors complete with cement concrete foundation i/c finishing etc. and having provision for fixing required accessories as required completein all respects . Make-Any approved make as per direction of engineer in charge.

S.I.T.C of indoor type cubical panel single door feeder pillar (wall mounted) made out of 2mm thick CRCA sheet of size (1050mm x450mmx300mm) with front opening totally enclosed weather, damp proof with MS angle frame made out of 40x40x5, deep having 200 amps, 04 nos insulated aluminum bus bars and to accomodate following accessories , suitable for 415V, 3phase 50 Hz AC supply complete with painting , connections, interconnections with copper conductors complete etc. and having provision for fixing required accessories as required complete in all respects . Make-Any approved make as per direction of engineer in charge.

Providing and laying of 3.5X70 Sqmm one number PVC insulated and PVC sheathed / XLPE armoured power cable of 1.1 KV grade of following size direct in ground (75 cm below ground level) including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.Make-Havells/Polycab/KEI

Providing and laying of 3.5X95 Sqmm one number PVC insulated and PVC sheathed / XLPE armoured power cable of 1.1 KV grade of following size direct in ground (75 cm below ground level) including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.Make-Havells/Polycab/KEI

Providing and laying of 3.5X120 Sqmm one number PVC insulated and PVC sheathed / XLPE armoured power cable of 1.1 KV grade of following size direct in ground (75 cm below ground level) including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.Make-Havells/Polycab/KEI

Dismentalling of existing wall mounting panel with all cable connections and making the connections of MCCBs, Bus bar etc as required.