REPAIRS OF CERTAIN WOODEN AND STEEL FURNITURE AT OTM/MD ACCN OF 515 ABW UNDER BSO (SOUTH) OF GE (SOUTH) BANGALORE

Amount

BED PLYWOOD TOP WITH MNF SET (Applicable to item No 01 to 05): (Drg No. FD-246) Removing the existing unserviceable broken wooden long rail and supply of first class hard wood (Teak wood) new long rail of size 35mmx90mmx1980 mm including 35 mm x 5mm flat iron of mild steel bent to right angles complete as shown on drg and all as specified and directed.

Removing the existing unserviceable broken wooden head board including legs and supply and fix 900x400mm new head board including teak wood legs of size 60mmx60mmx400mm complete as shown on drg and all as specified and directed.

Removing the existing unserviceable /broken foot board including legs and supply and fix 900x300mm new foot board including teak wood legs of size 60mmx60mmx30mm complete as shown on drg and all as specified and directed.

Removing the existing unserviceable /broken wooden stiffeners (supporting pieces) and supply and fix first class hard wooden stiffeners of size 40cmx60cm complete as shown on drg and all as specified and directed.

Removing the existing unserviceable plywood and supply and fix 900mmx1800mm x 12mm thick plywood commercial BWR grade bearing ISI marked complete as shown on drg and all as specified and directed.

TABLE WRITING (Applicable to item Nos 06 to 11): (Drg No. FD-249 FD-33 FD-275) Removing the existing unserviceable broken top and supply and fix new top made out of 18mm thick prelaminated particle board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination with 6mm thick teak wood edging, size 1145mmx600mm complete as shown on drg and all as specified and directed.

Removing the existing unserviceable/ damaged cupboard shutter and supply and fix new shutter made out of 18 mm thick prelaminated particle board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, size 400mmx700mm, including piano hinges and brass lock complete as shown on drg and all as specified and directed.

Removing the existing unserviceable drawer and supply and fix new drawer size 300mmx600mmx75mm, made out of teak wood plank 12 mm thick for sides and back and 18mm thick prelaminated particle board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination for front and 6mm thick plywood for bottom of drawer (Plywood, grade BWR, type BB with no. of ply 5) including fittings such as knobs complete as shown on drg and all as specified and directed. Note:- Each drawer will be measured as single unit.

Removing the existing unserviceable back and supply and fix new back size 1145mmx700mm, made out of 6mm thick Plywood grade BWR, type BB, no. of ply 5, with two coats of synthetic enamel paint over a coat of primer complete as shown on drg and all as specified and directed.

Removing the existing unserviceable side and supply and fix new side size 600mmx700mm, made out of prelaminated particle board, 18mm thick exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination complete as shown on drg and all as specified and directed. Note:- Each side will be measured as single unit.

Removing the existing unserviceable leg and supply and fix new teak wood leg size 35mmx55mmx717mm, etc complete as shown on drg and all as specified and directed.

TABLE DINING 6 PERSONS 1500mm x 900mm (Applicable to item Nos 12 to 15): (Drg No. FD-273 FD-239) Removing the existing unserviceable damaged top and supply and fix with a new prelaminated particle board 18mm with 6 mm thick teak wood edging all round of size 1500mmx900mm complete as shown on drg and all as specified and directed.

Removing the existing unserviceable damaged front and back rails & supply and fix new teak wood front and back rails of size 25mmx100mmx1500mm complete as shown on drg and all as specified and directed.

Removing the existing unserviceable damaged leg and supply and fix new teak wood leg of size 75mmx40mmx760mm complete as shown on drg and all as specified and directed.

Removing the existing unserviceable damaged side rails and supply and fix new teak wood side rails of size 25mmx100mmx900mm complete as shown on drg and all as specified and directed.

TABLE DINING 8 PERSONS 1800mm x 900mm (Applicable to item Nos 16 to 19): (Drg No. FD-273 FD-239) Removing the existing unserviceable damaged top and supply and fix new top with a new prelaminated particle board 18mm with 6 mm thick teak wood edging all round of size 1800mmx900mm complete as shown on drg and all as specified and directed.

Removing the existing unserviceable damaged front and back rails & supply and fix new teak wood front of size 15mmx100mmx1800mm and back rails complete as shown on drg and all as specified and directed.

Removing the existing unserviceable damaged leg and supply and fix new teak wood leg all as specified and as shown on drg of size 75mmx40mmx700mm complete as shown on drg and all as specified and directed.

Removing the existing unserviceable damaged side rails and supply and fix new teak wood side rails of size 25mmx100mmx900mm complete as shown on drg and all as specified and directed.

TABLE PEG (Applicable to item Nos 20 to 23): (Drg No. FD-384 FD-25 FD-236) Removing the existing unserviceable top and supply and fix new top of size 450x300 mm made out of 18mm thick pre-laminated particle board and 4mm thick teak wood edging round the top of table complete as shown on drg and all as specified and directed.

Removing the existing unserviceable bottom rail and supply and fix new teak wood bottom rail of size 20x 40x300mm complete as shown on drg and all as specified and directed.

Removing the existing unserviceable front/back rail and supply and fix new teak wood front/back rail of size 20x 40x450mm complete as shown on drg and all as specified and directed.

Removing the existing unserviceable leg and supply and fix new teak wood leg of size 30x50x380 mm complete as shown on drg and all as specified and directed.

TEAPOY (Applicable to item Nos 24 to 27): (Drg No. FD-34 FD-278 FD-232 FD-382) Removing the existing unserviceable top and supply and fix new top of size 600mmx450mm made out of 18mm thick pre-laminated particle board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination with 4mm thick teak wood edging al-round the top of teapoy complete as shown on drg and all as specified and directed.

Removing the existing unserviceable leg and supply and fix new teak wood leg of size 515mmx45mmx45mm complete as shown on drg and all as specified and directed.

Removing the existing unserviceable front rail and supply and fix new teak wood front rail of size 450mmx50mmx20mm complete as shown on drg and all as specified and directed.

Removing the existing unserviceable side rail and supply and fix new teak wood side rail of size 390mmx50mmx20mm complete as shown on drg and all as specified and directed.

SOFA SETs (Applicable to item Nos 28 to 36): (Drg No. FD-281) Removing the existing unserviceable tapestry cloth, cushion and replacing with new tapestry cloth as per sample with foam cushion of size 560mmx530mm, 40 density, 100mm thick, including inner cloth complete as shown on drg and all as specified and directed. Note :- Each cushion for seat or back will be measured as single unit.

Removing the existing unserviceable leg from Sofa and supply and fix new teak wood leg of size 35mmx75mmx510mm complete as shown on drg and all as specified and directed.

Removing the existing unserviceable arm rest from sofa and supply and fix new teak wooden arm rest complete as shown on drg and all as specified and directed.

Removing the existing unserviceable side rail from sofa and supply and fix new teak wood side rail of size 35mmx100mmx690mm complete as shown on drg and all as specified and directed.

Removing the existing unserviceable bearer from sofa long pieces and supply and fix new teak wood bearer of size 590mmx50mmx22mm complete as shown on drg and all as specified and directed.

Removing the existing unserviceable bearer from sofa short pieces and supply and fix new teak wood bearer of size 440mmx50mmx22mm complete as shown on drg and all as specified and directed.

Removing the existing unserviceable battens from sofa and supply and fix new teak wood battens of size 570mmx50mmx22mm complete as shown on drg and all as specified and directed.

Removing the existing unserviceable front rail from sofa long pieces and supply and fix new teak wood front rail complete as shown on drg and all as specified and directed.

Removing the existing unserviceable front rail from sofa short pieces and supply and fix new teak wood front rail of size 22mmx102mmx1740mm complete as shown on drg and all as specified and directed.

ALMIRAH LARGE STEEL: (Drg No. FD-1031) Removing the existing unserviceable three way locking device and supply and fix three way locking device with cover for almirah large steel complete as shown on drg and all as specified and directed.

ALMIRAH SMALL STEEL: (Drg No. FD-1032) Removing the existing unserviceable three way locking device and supply and fix three way locking device with cover for almirah medium steel complete as shown on drg and all as specified and directed.

ALMIRAH LARGE STEEL/SMALL STEEL (Applicable to items Nos 39 to 47): (Drg No. FD-1031 FD-1032 FD-67) Removing the existing unserviceable lock and supply and fix new lock of appropriate size, 6 levers with duplicate keys chromium plated or equivalent as suitable in almirah large/ medium steel complete as shown on drg and all as specified and directed. Make: Link/Harrison Notes: (i) Unit rate quoted shall include for provision/repairs to back plate, cover to key hole, back side cover, locking device etc. (ii) Removing the existing steel chromium plated handle and supply and fix new handles shall be measured and paid separately.

Removing the existing unserviceable handle and supply and fix new chromium plated M S handle 125mm long to almirah large/medium steel complete as shown on drg and all as specified and directed.

Removing the existing unserviceable clamps for shelves and spot welding the shelves to almirah sides as directed and shown on drgs for almirah large/medium steel complete as shown on drg and all as specified and directed. Note:- Welding each shelf completely will be measured as a single unit.

Material and labour for preparation of old painted steel surfaces and applying one coat of synthetic enamel paint on all external and internal surfaces of almirah large steel of Size 920 x 485 x 1985mm including fixing new 3mm hard rubber pad in the bottom of legs etc complete all as specified and as directed.

Material and labour for preparation of old painted steel surfaces and applying one coat of synthetic enamel paint on all external and internal surfaces of almirah medium steel of Size 760mm x 440mm x 1270 mm including fixing new 3mm hard rubber pad in the bottom of legs etc complete all as specified and as directed.

Removing the existing unserviceable/ damaged shelves for almirah large steel and supply and fix MS sheet CRC 1mm thick bent to shape and applying two coat of synthetic enamel paint over a coat of red oxide primer including welding to the almirah complete as shown on drg and all as specified and directed.

Removing the existing unserviceable/ damaged shelves for almirah medium steel and supply and fix MS sheet CRC 1mm thick bent to shape and applying two coat of synthetic enamel paint over a coat of red oxide primer including welding to the almirah complete as shown on drg and all as specified and directed.

Removing the existing unserviceable/ damaged/ broken legs for almirah large and supply and fix new legs and applying two coat of synthetic enamel paint over a coat of red oxide primer including welding to the almirah complete as shown on drg and all as specified and directed.

Removing the existing unserviceable/ damaged/ broken legs for almirah medium and supply and fix new legs and applying two coat of synthetic enamel paint over a coat of red oxide primer including welding to the almirah complete as shown on drg and all as specified and directed.

LOCKER STEEL (BUILT IN) (Applicable to items Nos 48 to 52): (Drg No. FD-1029) Material and Labour for cleaning/preparing the existing surfaces of locker steel including inner and outer surfaces and applying one coat of synthetic enamel paint by spray process to achieve a uniform finish complete as shown on drg and all as specified and directed.

Removing the existing unserviceable/damaged/broken legs for lockers steel and supply & fix new legs and applying one coat of synthetic enamel paint over one coat of red oxide primer including welding to the locker and providing rubber pad 3mm thick for legs complete as shown on drg and all as specified and directed.

Removing the existing unserviceable/damaged hanging rod and supply and fix new hanging rod 20 mm dia steel chromium plated conduit pipe and two sockets shall be provided at the end of hanging rod complete as shown on drg and all as specified and directed.

Removing the existing unserviceable/damaged handle and supply and fix new chromium plated handle 100 mm long to locker steel fixed to shutters complete as shown on drg and all as specified and directed.

Removing the existing unserviceable/damaged Hasp and staple and supply and fix new cromium plated hasp & staple 75 mm long to locker steel complete as shown on drg and all as specified and directed.

Vivek Engineers

Global Furnisherts