Zone-1 chhata Zonal Chhata Office and toilet repair And painting work.

Dismentling Existing damage Plaster Including disposal of refuse as directed by E/IC with in a distance of 60 meters etc. all complete. {Chapter No. 17 S.I. No.16 (706)}

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. (17-Chapter SI.No.16)

Providing and laying Cement Concrete in 1:5:10 (1 cement :5 fine sand 10 Stone ballast 40 mm gauges) and curing complete, including cost of form work in foundation and floors. (5-Chapter Sr.No.1)

Class-150 Brick Work in 1:4 Cement and Coarse Sand, mortar in foundation and plinth including supply of all materials, labor and tools and plants, etc. Required for proper completion of the work. ( Chapter No. 06 Sr.No. 2)

12mm thick cement plaster in single coat of fair side of single of half brick wall for interior plastering up to floor two level including internal rounded angles chamfers and rounded angles not excluding 80mm in girth and finished even and smooth. No extra for mixing any additive. (c) 1 Cement : 4 Coarse sand. (Chapter No.13 Si.No.1)

Providing and laying Cement Concrete in 1:2:4 of not less than strength of M-15 stone grit (20 mm nominal size) approved coarse sand and cement. Curing complete including of cost of form work in foundation and floors.(5-Chapter Sr.No.6 Si.No..4.1.3)

20 mm cement plaster 1:3 (l cement:3 coarse sand) Finished with a floating coat of neat cement.{Chapter No.13 Si.No.11)

6mm thick Celling plaster 1:3 (1 cement :3 fine sand) cement & fine sand in F.M not less than 1.25, 1:3 including chipping of RCC surface before celing plaster. The cost of including at material, labor T&P and scafolding etc complete. (Chapter No.13 Si.No.13)

Providing and fxing lSl marked flush door shutters conforming to lS : 2202 (Part l) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.including ISI marked Stainless Steel butt hinges with necessary screws. (A) 35mm Thick. (Excluding cost of Flttings) (Chapter No.9 Si.No.1-9.21.1)

Fixing Door chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15x10x10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in- Charge. (Chapter No.9 Si.No.7a-14.2.1)