Open e-tender for the work of "Provision of Foot Over Bridge at Dasharathpur, Kajra and Bakudi stations over Malda Division under Senior Divisional Engineer- III/Malda".

Item Breakup - A-Non Schedule Item

Earth work in filling in embankment, trolley 10 refuges, level crossing approaches, platforms cum etc with all classification of approved soil done in layer not exceeding 300 mm thick with breaking all size of clods 1 filling of loose pocket and hand ramming as directed by engineer in charge complete in all respect. With Contractor's earth of approved quality and specification obtained from outside Rly earth with all lead lift as per site condition.

Casting of precast RCC slabs for floor & steps cum for FOB as per drawing & design or as directed by Site In-charge with M-25 (design mix) including cutting, erecting, bending etc. of reinforcement with correct spacing & binding properly including scaffolding, manufacturing of wooden / steel shuttering, all materials are to be supplied by the contractor by his own arrangement cement and reinforcement steel will be paid separately and slabs and steps will be precast.

Erecting, fitting & fixing of precast RCC slabs cum both floor and steps in position by bituminous packing as required at the existing FOB steel structure including all tools and plants and scaffolding to be arranged by the contractor.

Erection/launching of newly assembled girders MT and placement of the same on proper alignment line and level under traffic block with the help of Road crane/crane or any other means arranged by the contractor at his own cost duly maintaining safety. The erection scheme is to be submitted by the contractor and the work will be carried out after approval of the scheme by the railway authority. The rate is inclusive of all men and materials like tools & plants & amp. trackless, heavy machineries road cranes etc. required to carry out the work as required .All ancillary works as required for erection and launching of girders will be bone by the contractor and no extra payment will be made for erection and launching of girder (if the launching scheme is approved with rail crane, hire charge of rail crane as demanded by Mechanical deptt will be deducted from contractora bill) Total 3278206.10

Item Breakup - B1-DSR 2023 Item

40 gms 21.0 ALUMINIUM WORK 21.1S General Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. 21.3 complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.1 With float glass panes of 4.0 mm thickness Sqm 150 1176.8 176520 79 (weight not less than 10kg/sqm) Total 70346232.00

Item Breakup - B2-DSR 2023 Item

Item Breakup - B3-USSOR- 2011 Item

Item Breakup - B4-USSOR- 2021

On new girder during fabrication Total 2834640.00