Repair/Renovation and altetration of room no 31 A 31 B first floor main building and 42 B third floor mini building at civil secretariat Jammu. CNO-353

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead : Of area of 3 sqm. and below

12mm Cement plaster of mix: 13.1.1 1 : 4 ( 1 cement : 4 fine sand)

"Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screw 35 mm "

"Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screw 30 mm "

Providing and fixing aluminium work in doors, windows, ventilators, partitions with standard tubular section with dash fastener of required dia and shape and size jointed mechanically including ACP sheet/5mm thick /plain glass/ frosted glass/ laminated board panel complete with hardware fittings, powder coated aluminium, minimum thickness of powder coated 50 micron and conforming to IS 733 & IS 1285 (16 guage) complete job.LMR

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead : Of area of 3 sqm. and below

providing and fixing 4mm thick natural teak ply including cutting ,wastage,fevicol,nails,carriage etc.complete (green,century,archid)

Providing and fixing of 19mm thick ply including cutting, wastage, fevicol, nails, carriage etc. complete item of superior make (green, century, amulya , orchid) conforming BWP 710...... LMR

Providing and fixing of 1mm thick summica including cutting, wastage, fevicols nails etc. complete (green, amulya, virgo)

wooden polish on doors ( fiiling voids with chalk mitti,smooth with sand paper & Including material complete job ) LMR

Providing and fixing ISI: 12817 marked Stainless Steel Butt Hinges with Stainless Steel screws etc. complete. 100x58x1.90 mm

Providing and fixing ISI: 12817 marked Stainless Steel Butt Hinges with Stainless Steel screws etc. complete. 75x47x1.80 mm

Providing and fixing ISI marked oxidized M.S. handles conforming to IS : 4992 with necessary screws etc. complete : 100 mm

Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

Providing and fixing of door closer to Aluminium doors by way of drilling screws etc. complete (ISI make) of standard makeLMR

Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : 100x58x1.90 mm

Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts and screws etc. complete : 300x16 mm

providing and fixing of stainless steel tower bolt 150 mm Heavy duty LMR

providing and fixing of stainless steel door handles 100mm of heavy duty of approved make with necessery fitting and fixture complete LMR

providing and fixing of stainless steel door handles 150mm of heavy duty of approved make with necessery fitting and fixture complete LMR

providing and fixing of stainless steel heavy duty door lock of approved make complete with all neceesary fitting and fixtures LMR

providing and fixing of stainless steel heavy duty dummy door lock of approved make complete with all neceesary fitting and fixtures LMR

Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : 25 mm dia

Renewing glass panes, with putty and nails wherever necessary including raking out old putty : Float glass panes of thickness 4.0 mm(weight not less than 10kg/sqm)

"Providing and fixing of UV shhets ( light weight , highly durable &standard make )for wall panels etc.including design with stips , cutting ,fixing ,wastage ,carriage ..complete job . "

"Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in-charge. (Cost of aluminum snap beading shall be paid in basic item.) With floating glass panes of 4.0 With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm) "

Providing and fixing of 5 to 6mm thick super heavy PVC wall panelling with PVC angles/ corners including all accessories/arrangement including cutting wasttage ..LMR.

Providing and fixing of 12.50 thick gypsum board wall tile of size 600x600 mm fully perforated as per approved design and drawing approparetly design powder coated G I T channel grid system as per instruction mannual of manufacture including cost of 50 mm thick internal / rock wood lining for accostics

Providing and fixing of Gypsumboard tile false ceiling sheets (9mm thick) 2'x2' as per pattern/design with G.I Channel frame work by way of drilling, fasteners screws, cutting wastage loading, unloading carriage etc. complete (boral or euivalent make) 6-8mm thick LMR

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth Including necessary repairs to scratches etc. complete.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.

.Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):2nd class D- wood

"Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a primin coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes 6.4 kg/m

"Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 1 mm thick

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 2 mm thick

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ liter

Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. completeSize of tile 600x600 mm (Khajaria, Somany or equivalent

8.31.Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Khajaria, Somany or equivalent )"

Engaging skilled for specilised job during execution of work at site

shifting of debries / cleaning site /other allied works at site by engaging skilled and unskilled labours ,unskilled

Engaging trolley for shifting of mulba from site to beyond the municipality limit incl. Loading and unloading complete job