GE 874/EWS-74/2022-23

Amount

E/M Portion

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Point wiring with 1.5 Sq mm multi standerd insulated copper conductor single core PVC insulated cable 1100 volt including casing and caping for one light point controlled by one switches including 2nd class hard wood rectangular block open recessed cover with 3mm thick plastic laminated sheet cover incl PVC insulated 1.5 Sqmm copper conductor as earth wire for one light controlled by one switch completed all as specified and directed. Make : , Plaza/Havells/Polycab or equivalent of approved make as approved by Eingineer-in-charge.

All as per item above but for 3-pin socket out let 5 Amps on independent board with other switches with continous PVC insulated copper conductor cable 1.5 Sqmm earth wire. Make : , Plaza/Havells/Polycab or equivalent of approved make as approved by Eingineer-in-charge.

All as per item above but for 3-pin socket out let 5 Amps on the same board with other switches with cable 1.5 sqmm size.

All as per item above but for 5-pin socket out let 15/16 Amps on independent board with 2.5 Sqmm Multi std.copper conductor PVC insulated cable 1100 volts grade with continous continous1.5 Sqmm earth wire. Make : , Plaza/Havells/Polycab or equivalent of approved make as approved by Eingineer-in-charge.

Supply and fixing of lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings suitable for, LED bulb 7 watt, as below. Make : Havells/Anchor/Siska/Philips

Supply and fix LED Bulb 9 Watt for Item No.12 Above . Make Havells/Bajaj

Supply and fix surface mounted decorative bulk head edge -lit LED Luminaire comprising of high brightness LEDs of 1x10 W LED having PF not less than 0.9 all as specified and directed. Make - Havells cat part No LHEOAOP7UZ6W010 & equivalent.

Supply and fixing in replacement of exhuast fan AC single phase 230/240 V of size /sweep 250 mm to 300 mm with louver as per require at site. Make :- Havells, Bajaj

S&F Switch piano flush type 5 Amps single pole one way. Make : Havells/Anchor/Philips

S&F ceiling rose surface bakelite 65x50mm two to three terminals (ISI Marked). Make : Havells/Anchor/Philips

M & L for sub main wiring with two single core 4 sqmm PVC insulated and unsheathed 1100 volts grade, stranded copper conductor (FRLS) ISI marked drawn into & including medium grade PVC conduit/ casing caping, with wooden or white coloured casing caping (as specified and directed) 25 mm dia with all fittings and accessories and one continuous run of 2.5 sqmm copper conductor PVC insulated (green colour) as earth wire fixed into PVC casing / conduit (not less than 25mm outer dia) with all fittings and accessories fixed conealed/ surface including taking down old unserviceable submain wiring and making good disturbe surface complete all as specified and directed.Make of cable- Havells ,Plaza, Policab.Make of Casing Caping - Poly plast/ pressfit/ Presto plast.

M & L for sub main wiring with two single core 2.5 sqmm PVC insulated and unsheathed 1100 volts grade, stranded copper conductor (FRLS) ISI marked drawn into & including medium gradePVC conduit/ casing caping, with wooden or white coloured casing caping (as specified and directed), 20 mm dia with all fittings and accessories and one continuous run of 1.5 sqmm copper conductor PVC insulated (green colour) as earth wire fixed into PVC casing / conduit (not less than 20mm outer dia) with all fittings and accessories fixed conealed/ surface including taking down old unserviceable submain wiring and making good disturbe surface complete all as specified and directed.Make of cable- Havells ,Plaza, Policab.Make of Casing Caping - Poly plast/ pressfit/ Presto plast.

Supply only heating element with new one capacity of 2000 Watts for 25/ 50 Ltr geyser(round/triangle type as per site requirement).

Supply Only of Thermostat 7''/9" suitable for 25/50 ltrs capacity water geyser with automatic thermal cutout fixed in repair and including testing, complete alla specified.

M&L for LED Batten 1x20 W for regal batten for LED Universal batten for G13 T with 18 W tube rods and Ultra bright LED Polycarbonate tube light very high efficiency suited for installation in existing T8 and connecting electrically using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required at site or directed by Engineer-in-Charge.Make :Havells Batten Cat part No LHEXARP7UN1W020 and LED Tube Rod Cat part No LHLDCLXNUL8X018 or Equivalent.

Supply only LED Tube Light Driver 6W/ 10W/ 18W/ 20W /36 Watt(as required), with surge protector, input voltage variation between 140V to 290V. Make :- Havells or equivalent

Supply and fix in replacement LED 6 to 36 w (as required at site) ,230v Indoor recess mounting down light circular/ square (as required at site) and flat type, Chip on Board, complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, all as specified and directed. Make Havells, Philips ,C&S

S&F Switch socket combination 5 in 1, 5 and 15/16 Amp flush type universal controlled by by one switch (ISI Marked). Make : Havells/Anchor/Philips

S&F socket outlet 2-in-1, 3 pin, 5 Amps flush type (ISI Marked) complete all as specified and as directed by Engr-in-charge. Make : Havells/Anchor/Philips

S&F Switch socket combination 2-in-1 5 pin 5 Amps flush type (ISI Marked) complete all as specified and as directed by Engr-in-charge. Make : Havells/Anchor/Philips

S&F rectangular boards/ Plastic blocks gangue box 30x25x4cm depth closed recessed, complete all as specified and as directed by Engr-in -charge.

S&F Sheet metal enclosure factory made for DBs single pole and neutral double door 240 volts 8 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed. Make : Havells/LEGRAND/SSK

S&F Sheet metal enclosure factory made for DBs single pole and neutral single door 240 volts 4 way & 6 Way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing, and commissioning and making good of wall, surfaces all as specified and directed Engr- in-charge.

S&F SPN, single pole and neutral, 240 Volts , 50 Hz 10 Ka, 6-40 Amps, 240 V all as specified and as directed. Make :- Havells,L&T or equivalent

S&F MCB single pole 240 Volts , 6 to 32 Amps all as specified and as directed. Make : Havells/Legrand/Philips

Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) connected to galvanized iron wire 4mm dia by means of bolts, nuts and washers of galvanized iron or steel, GI light grade protection pipe 15mm dia, GI medium grade water pipe 20mm dia with funnel all as shown in electric plate No 3 of SSR-2009 pt-I and testing complete including earth work in any type of soil PCC 1:2:L4 as in earthing pit CI pit cover 5.5mm thick common salt charcoal all as specified.

S&F 1100 volt grade heavy duty cable PVC insulated multistranded aluminum stranded conductor served with PVC tape and over all PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI suspension wire one twin core cable flat of circular of size 16 Sqmm complete all as specified and as directed by Engr-in-Charge. Make : Havells/Anchor/Polycab/Plaza

Repair/Replacement of PCB and thermatically protected compressor complete repair for Refrigerator capacity 400 Ltr. Make : Samsung Double door Refrigerator

S&F lamp holder angle type PVC/Poly carbonate type insulated body with back plate suitable for batten/wall fitting complete all as specified and directed. Make - Anchor/SSK/Cona Havells

S&F sheet metal enclosure for DBs (single door type) when MCBs to be used single pole and neutral 12 way incl blanking plate as reqd with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed. Make : Legrand, Havells/HPL.

S&F single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB 20 amp complete all as specified and directed. Make : Legrand, Havells/HPL.

MCB single pole & neutral 40 to 63 Amps 230 Volts'C' series, 10 KA complete all as specified and directed.Make: Havels /Legrand L&T.

Supply and fixing in replacement LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.Make:-Havells/Syska/Wipro

Supply and fixing in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. complete all as specified and directed.Make:-Havells/Syska/Wipro

Supply and fixing in replacement round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.all as specified and directed.Make:-Havells/Syska/Wipro

Supply and fixing in replacement LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.Make:-Havells/Syska/Wipro

S&F Bed side designer lamp, 5 watts, with LED lamp, including all wiring and switches required, with terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body.

supply and fix in replacement Decorative gate light made up of high grade unbreakable polycarbonate material suitable for retrofit LED 20W B22 basewitth 1x20 watt LED lamp complete all as specified and directed by Engr-in-charge . Make Havells, Philips ,C&S

supply and fix in replacement unique LED flood/ focus light 70 W LED 6500 K with IP 65 protection complete all as specified and directed by Engr-in-charge Make Havells, Philips ,C&S

M&L rewinding of exhaust fan with super copper enamelled wire with suitable gauge, varnishing, oiling and greasing of any make of size 450 mm sweep by dismantling its parts, capacitor 4 Mfd by replacing petty items such as nuts & bolts,bearing & washers, cleaning of exhaust fan body and its blade by cleaning agent, assembling, and connecting and testing Complete.

Supply and Replacement of unserviceable heating helemant with new one capacity of 1500 Watts (triangle type) for 25 Ltr geysers.

Supply and Replacement of unserviceable heating elemant with new one capacity of 2000 Watts for 25 Ltr geyser(triangle type).

Repair/Replacement of Thermostat 7''/9" suitable for 25/50 ltrs capacity water geyser with automatic thermal cutout fixed in repair and including testing, complete alla specified.

Repair/Replacement of copper Geyser Assembly with rubber paking for 25/50 ltrs capacity water geyser with automatic thermal cutout fixed in repair and including testing, complete alla specified.

Taking out old unserviceable UG cable of any size Supply, Laying , jointing and testing LT underground cable, heavy duty, 1100 Volts, XLPE insulated and sheathed, armoured with multi-stranded aluminium conductor cable , laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts duly encased in galvanised steel pipe of suitable sizes including cable gland of suitable sizes and aluminium lugs for connection complete all as specified and directed for 10 Sqmm 2.0 core.

All as per item above but 50 sqmm 3.5 core.

All as per item above but 70 sqmm 3.5 core.

All as per item above but 95 sqmm 3.5 core.

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m depth for foundation, laying of cables/pipes/poles etc., and getting out in hard/densesoil complete all as specified and directed.

All as per item above but exc 1.50 but n.exc 3.0m deep complete all as specified and directed.

Returning filling in including spreading levelling watering and well ramming in layers not exceeding of 25 cm thick in soft/loose soil complete all as specified and directed.

Removal of surplus soil as obtained from excavation to a distance not exc. 50 Mtr and depositing where directed at a level not exc. 1.5 Mtr above the starting point all as specified and directed.

Supply and laying dry river sand for cable cushioning in trenches to required width at bottom and top of cable including spreading levelling watering and consolidation complete all as specified and directed by Engineer-in-charge. Note:-Punned thickness only shall be measured and paid.

Supply and laying old size brick covering with width equal to length of brick as the mechanical protection to cable with well burnt sub class 'B' laid in trenches flat complete all as specified and directed by Engineer-in-charge.

Supplying and fixing, light grade, Galvanised mild steel pipe / tubing, complete with all fittings, laid under roads, drain, paths, fixed to poles/ walls with suitable mild steel clamps, bolts, nuts and washers complete all as specified and directed as for cable proction of 40mm bore. (Note:- Excavation & earth work shall be measured and paid for separately under appropriate item of this schedule).

All as per item above but 50 mm bore.

Restretching of LT /HT ACSR conductor and GI wire of any size and on any type of poles carrying upto six conductors in a span including disconnecting from insulator and rewinding to insulator after stretching with and including aluminium wire including re-fixing/re-adjusting line spans, line separators, cross arms on poles all as specified.

Cutting /Trimming/ Chopping of tree trenches along the overhead lines upto 3 m from elect lines clearance on both sides of HT/LT lines and disposing off the cut tree/ branches site to a distance not exc. 50 m and clearing the site as directed.

Material and labour of repair unserviceable LED Street Light/ Security Light of 25 to100 Watts, including replacement of driver with a new driver (having surge protector and lightning protector) with input Voltage variation between 140V to 300V (voltage in this region will not be considered as surge voltage), with after repair warranty of two years.

Supply only of suitable LED driver (having surge protector and lightning protector) with input Voltage variation between 140V to 300V (voltage in this region will not be considered as surge voltage) for LED Street/ security Lights upto 25 to 100 Watts, with warranty of two years.

M&L in replacement of ACSR conductor of any size and any type including stretching, fixing and binding to insulator on OH LT line service feeders all as specified including aluminium binding wire or aluminium tapes complete all as specified. This item includes all consumables (such as binding wire and replacement insulators and cross arms, etc., for replacement of damaged ones found after/ during replacement process).

Supply and replacement of MCCB 160 Amp 4 Pole 415 Volt breaking capcity 36kA. Make Havells or Equivelent Make of L & T or C&S.

Supply and replacement of MCCB 200 Amp 4 Pole 415 Volt breaking Capacity 36kA. Make Havells or Equivelent Make of L & T or C&S.

Supply and replacement of MCCB 250 Amp 4 Pole 415 Volt breaking Capacity 36kA. Make Havells or Equivelent Make of L & T or C&S.

Supply and replacement of MCCB 400 Amp 4 Pole 415 Volt breaking Capacity 36kA. Make Havells or Equivelent Make of L & T or C&S.

Supply Only of on load changeover switch 415 volt in sheet metal enclosure 4 pole of capacity 100,160& 250 Amp (as required) complete all as specified and directed by Engr-in-Charge.

M&L for Painting to LT poles, 9 mtr with cross arms, bracing and clamps with one coat of synthetic enameled paint over one coat of red oxide primer including scrapping the old paint carefully to make smoothen complete and painting strips of red and black from foot of pole upto 5 feet each strip of 30 cm height all as specified and directed.

S&F in replacement of Cross arms, bracing, supports clamps and back plates, fabricated from structural steel sections incl nuts, bolts, washer, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed incl one primer, one under coat and one finishing coat of aluminium paint over prepared steel surface.

M&L in replacement of Shackle type, porcelain, vitreous, white, brown or green insulators for working pressure 1100 volts grade, 90 mm dia 75 mm height including galvanized mild steel straps of 31 x 3 mm size, 12 mm dia insulator bolts, washers and nuts complete all as specified.

M&L in replacement of Pin type porcelain vitreous white brown or green insulator including one galvanized mild steel spindle, two galvanized iron, washers and one galvanized iron nut, 100 mm height, 65 mm dia for 1100 volt grade all as specified.

Supply only self Adhesive electrical insulation tape of size 2.5cm x 25m x 0.125mm, ISI marked. Make : Steelgrip/Kinjal/SSK.

Supply and fix street light Engineering plastic one piece moulding control box with locking arrangment made out of HDPE and FI clamp 25 x 3mm complete of dimensions in CM +/-10%(34x28x13) including MCB SP 6 Amp 240 Volts complete with 02 Nos aluminium busbar or terminal two nos (2P-R/Y/B and N) of rating 63 amps for single phase and neutral on porcelain based insulators. Make : Sintex/ Hensel/ SHI/BRITE

Supply, erecting and fixing the true vertical position,steel tubular swaged pole(410 SP-31), 09 mtr long, complete with cast iron base plate,pole cap/final taper plug, bolts, nuts and washers, welded reduced section and longitudinal weld throughout entire lenght of pole, including two coats of black bituminous paint externally upto planting depth and remaining exterior portion of pole shall be provided with one coat of red oxide primer and two coats of aluminium paint complete all as specified and directed. (Numbering of the poles shall be done with synthetic enameled painted letter of shape & size as directed). Note:- (a) Cost of numbering of pole shall be deemed to included in unit rate. (b) Excavation, Earth work and PCC foundation will be measured and paid for separately.

S & F GI bracket made out of GI pipe light grade of size 40/32 mm 1.2 m long cut to length bend to the required shape and 02 Nos mounting flat iron clamps size 40mm x 6mm, 04 Nos hexagonal bolts 10mm dia 100mm long with nuts and washers complete all as specified and directed.

Supply and fixing LED street light luminaries 70/72 Watt having shall be made of single piece Aluminium Die cast with powder coated in RAL-7032 shade with heat distribution fins onhousing with UV stabilized toughned flass cover and should have secondary lens on each LED for better light distribution .The system luminaire efficacy should be > 110 LM/W with high power LED of Philips/Osram/Cree/Nichia Make.LED driver should be potted and BIS certified with efficiency > 85 % frequency 50 HZ,Operating voltage range 120V-270V,current not more than 0.320 Amp,PF 0.95, THD (I) < 10 %, supported with 5 KV internal and 10 KV external SPD, Humidity 10% to 90 % RH, working temperature - 20⁰ C to 50⁰ C lige expectancy of LED should be 50000 burning houres with minimum 70 % initial lumene maintained, CRI >70. Make:- Cat Part No LSTP-72-CDL-M OF Crompton or equivalent Make in Havells / Halonix / Phillips LED.

M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) in foundation of PCC poles/struts as specified including necessary form work, complete all as specified & directed.

M&L for plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) in foundation of stay assembly etc including necessary form work, complete all as specified & directed.

M&L for plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) for coping around poles, including necessary form work finishing even and smooth without using extra cement, complete all as specified & directed.

Supply and connecting 1100 volts grade heavy duty cable with PVC insulated solid aluminium conductor served with an inner sheathing of PVC tape and overall PVC sheathed of size 2.5/4 sqmm 3 core for pole box to street light fitting complete all as specified and directed.

S&F 1100 volt grade heavy duty cable PVC insulated multistranded/solid aluminum conductor served with PVC tape and over all PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI suspension wire one 2 core cable flat or circular of size 10 Sqmm including taking down old service connection and removing from the side complete all as specified and as directed.

B/R Portion

Demolition of cement concrete (un-reinforced) in ground floors and paving n.exc 15 cm thickness.

Dismantling of timber scantlings 40 sq cm and over in sec in any position in framed work,carefuly .

Dismantling of boarding, any description, fixed in any position with nails.

M &L for second class soft wood as in scantling clean sawn fixed in position.

Fixing in repair second class soft wood as in scantling clean sawn fixed in position but except wood.

Dismantling brick work or stone masonry built in cement mortar.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified.

S&F Welded steel wire fabric complete to wood or steel members (Weight per SQM exc.4 kg as per Direction of Engr -In- Charge) complete all as specified and directed.

M&L Mild stee round bars FE-410 W Grade 6mm dia and up to 10mm cut to length bent to shape required including crancking, bending spirally and binding with and including steel wire (annealed) not less than 0.90mm dia (quality confirming to TMT Fe 500D),

M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

M & L for rendering 10 mm thick on Brick masonry surfaces or surfaces other than fair face of brick work in cement mortar 1:6, to be finished even and smooth (without using extra cement). complete all as specified.

M & L for rendering 15mm thickin two layer on stone masonry surfaces or other than fair faces of brick work or on one side of lathing 1st layer in CM ( 1:6) & 2nd layer in Cement Mortar 1:4 using WPC as per manufacturars inatruction complete, finished even and smooth without using extra cement.

Supply only integral water proofing compound.(WPC)

M & L applying two coats of cement base paint including preparation of newly plastered surface of wall. complete all as specified.

M&L for applying two coats of cement base paint,white or tinted on old surface over a coat of chalk whiting,Complete removal of existing treatment (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces with putty wheraver reqd complete all as specified and directed.

M&L for preparation of old plastered sufaces of walls & applying one coat of cement base paint incl. clining /washing complete all as specified and directed.

M&L for preparation of old plastered sufaces of walls with Acrylic Smooth exterior emmelsion paint of required shade with Silicone additives of required shade,New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

M&L preparation of old plastered surface of wall & applying two coat of white wash complete all as specified.

M&L for applying one coat of acralic distemper oil emulsion paint (OBD), white or tinted Preparing old decorated surfaces of walls including washing, rubbing down and stopping complete all as specified and directed.

M&L for applying two coat of acralic distemper oil emulsion paint, (OBD) white or tinted Preparing newely plastered surfaces of walls including complete all as specified and directed.

M&L for applying two coat of acralic distemper oil emulsion paint (OBD), white or tinted Preparing old decorated plastered or unplastered surfaces of walls including washing, rubbing down and stopping of dietempered surfaces complete all as specified and directed.

M&L for applying 1.5mm thick wall care putty on wall as reqd.complete all as specified and directed.

Taking down cenent plaster on brick or stone walls, etc.including raking out joints, hacking for key, scrubbing down with water, etc.

Dismantling plain or corrugated steel sheeting any gauge thickness in roof covering.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.

All as per item above but plain sheet as in roof covering /cladding to wall fixed with tapping screws.

S&F Galvanised,corrugated mild steel sheeting of thickness 0.63 mm with two corrugations side lap, fixed with coach screws/ J hook and washers, in roofs, walls etc. with grade of zinc coating 275.

Taking down chowkhats or frame exe. 1.5sqm and n.exc. 4 sqm each with shutter (without taking out shutter from the fame).

Taking down chowkhats or frame not exc 1.5 Sqm each ( without taking off shutters from the frame).

Taking down shutters from the frame not exc 1.5 Sqm each .

M & L for second class soft wood plain, solid straight chowkhat and frames, wrought framed rebated on the solid rounded or chamfered, put together with glue penned and joints. complete all as specified.

S & F Plain, framed, panelled shutters 35mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified.

M&L for second class soft wood 30mm Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified.

M & L for applying two coats of synthetic enamel point over a coat of pink primer including preparation of new wooden surface exc 10 cm width or girths complete all as specified.

M&L for applying one coat of synthetic enamel paint Preparing old painted surfaces of wood and wood based materials of any description and any position over 10cm in width or girth andcomplete all as specified and directed.

S & F 300mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified.

S & F Mild Steel butt hinges 100mm long medium weight.

S & F Mild Steel butt hinges 75mm long medium weight.

S & F 150 Mild steel barrel tower bolts, stove enamelled black, with bright bolt

S & F 100 Mild steel barrel tower bolts, stove enamelled black, with bright bolt

S & F aluminum handles, cast type, anodized 150mm long.

S & F aluminum handles, cast type, anodized 125mm long.

Plain fillet, square, rectangular any section, clean sawn exc 3 Sqcm sand not exc 6 Sqcm secured with nails.

M & L sheet glass 4mm thick ordinary quality and glazing with oil putty or wooden beading of appropriate size in square/ rectangular n.exc 0.5 in each pane, 3mm thick. complete all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads

S&F plywood, grade BWR type BB fixed with screw to timber frame of 9 to12mm thick complete all as specified and directed.

S&F Eaves Boarding of 20mm thick of 2nd class Softwood fixed with nails in any situation (except flooring and skirting), Planed one side with butt joints. complete all as specified.

M&L hard core of guge n.exc. 63mm deposited spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface. complete all as specified.

M& L for Machine cut kota stone slab flooring 20-25 mm thick over cement screed bed laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with pigment to match the shade of the slab including rubbing and polishing complete including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for non skid ceramic tiles, joint free, coloured tiles 7mm to 8 mm thick (Square or rectangular) area of tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile laid over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed.

M&L Glazed ceramic colour tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tile on 10mm thick screed in CM 1:4 complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in kerb or mud stops rounded or chamfered on edges all as specified for copping, including weathering slightly rounded or chamfered using form work (Straight or curved).

M&L 75 mm thick plain cement concrete type D2 1:4:8 using 40 mm graded crushed stone aggregate as in sub base complete all as specified and directed by Engr-in-Charge.

75 mm thick PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in plinth protection, surfaces finished even and fair, complete all as specified and directed.

M&L 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand wherever required etc. complete all as specified and directed.

Demolision of old existing Stone slabs and tiles / paver block of any description or thickness in floors, aprons etc.

Taking down & refixing Repair & maint. Of Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and erected in position as indicated, complete: push pull or manual type exe.4sqm and n.exc.10 sqm each . with S&F new fittings likeSafety lever locks mild steel with 4 levers 01nos for rolling shutters ,Ball bearing for rolling shutters 02 nos & all other items reqd necessary oiling /Gracing complete all as specified and directed.

M&L for preparation of old steel Surfaces of any description, over 10cm in width or girth,& applying one coats of synthatic enamal paint complete all as specified and as directed.

M & L two coats of synthetic enamel paint over a priming coat with red oxide over steel surface over 10 cm width or girth all as specified.

S&F GI tube 15 mm dia medium grade galvanished with all fittings laid in floors /wall etc. incl taking down old u/s tubing complete all as specified and as directed.

Excavation in trenches n.exc 1.5m wide and n.exc. 1.5m in depth, for foundation, etc and getting out in any type of soil.

M&L SGSW line 150mm dia SGSW pipe laid in trenches and jointed all as specified.

M&L for concrete bed to drain pipe including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 (using 40mm graded agg) for 150mm bore pipe all as specified.

Returning, filling in, inculding spreading, levelling, watering & well ramming in layers n exc 25 cm with any tpye of soil

Removing ecxavated material n exc 50 m and deposting where directed at all level n exc 1.50 m above the starting point all as directed.

S & F vitreous china wash basin,white flat back , size 550mmx450mm with and including Waste fittings, brass, chromium plated for basins with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed with and including Supplying and fixing cast copper alloy chromium plated, fancy type, pillar tap, 15mm bore, scrwed down high pressure with or without lettereed hot or cold with long shanks, screwed for iron pipe complete all as specified and directed.

S&F Stop valves cast copper alloy,fancy type ,chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore pipe.

S&F Bib taps cast copper alloy ,chromium plated, fancy type, with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule of 15mm bore.

S&F vitreous china squatting pan, Orissa pattern, size 580 x 440 mm white with integral foot rests and connection with cast iron P trap and flushing pipe, including PVC valveless,syphonic action type, low level PVC flushing cistren 10 ltr cap white with flush pipe & all fitting with provision of lime concrete bedding complete all as specified and directed.

S&F 20mm bore gun metal globe or gate valve with iron wheel head, screwed both ends complete all as specified.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete.

S&F GI tube 15 mm dia medium grade galvanished with all fittings laid in floors /wall etc. complete all as specified and as directed.

S&F GI tube 20 mm dia medium grade galvanished with all fittings laid in floors /wall etc. complete all as specified and as directed.

S&F 110mm dia PVC (SWR) pipes single socketed, in any length, laid in trenches or in floors / fixed to walls

S&F 75mm dia PVC (SWR) pipes single socketed, in any length fixed to walls / floors or in trenches

S&F PVC (SWR) bends any radius, 110mm bore, fitted with oval access door

S & F 110mm dia PVC (SWR) pipe complete all as specified and as directed

S&F PVC (SWR) bends any radius, 75mm bore, fitted with oval access door

S&F 110mm bore PVC (SWR) junction, single (single T) equal or unequal with door access

S&F 110mm bore PVC (SWR) junction, single (single Y) equal or unequal with door access

PVC (SWR) vent cowl 75/110 mm dia

M&L PVC(SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement

POPULARHARDWARESTORE

M/S S. D. BUILDERS

M/S AB AHAD RATHER

M/S MOHD MAQBOOL RATHER

Bidder Name

M/S S. D. BUILDERS

M/S AB AHAD RATHER

POPULARHARDWARESTORE

GH MOHD SHAH AND CO

M/S MOHD MAQBOOL RATHER