ADDITION / ALTERATION TO OTM ( OR LIVING ) BLDG NO 17,19,20,21,22 AND 23 OF 6TTR PONDA (GOA)

Amount

Dismantling of Single layer Mangalore pattern or similar tiles in roofing portions bedded in lime or cement mortar complete all as specified and directed.

Dismantling of Battens spaced exc 15cm for tiles, shingles etc, of any size including tilting fillets complete all as specified and directed.

Dismantling of timber scantlings 40 sq. cm and over in section, in any position fillets, rails, posts, rafters, purlins, trusses etc in unframed works complete all as specified and directed. (Note:- If flooring tiles of barracks will broken at the time of dismantling of roof contractor will rectify the same and match with previous flooring neat and clean on his own expence. No extra payment will be admissible for the same)

Dismantling of timber fillets under 40 sq. cm in section., in any position fillets, rails, posts, rafters, purlins, etc in framed works. Complete all as specified and directed.

S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. Make for item no 5&6 : (i) TATA (ii) JSW (iii) ESSAR (iv) HINDALCO (v) INDALCO (iv) ASSOCIATED PROFILES AND ALIMINIUM LT

Demolition of brick/stone masonry walls built in cement mortar including all quoins, arches, pillars, retaining walls etc. complete all as specified and directed by Engineer in charge.

M & L for laterite stone masonary of squared ruble, regular coursed well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed by Engineer in charge.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random ruble walling, uncoursed or brought upto courses, hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc. 20mm of squared ruble masonry regular coursed.

M & L rendering 15mm thick in CM 1:6 on fair faces of brick/stone wall or concrete surface finished even and smooth without using extra cement complete all as specified and directed by Engineer- in-charge.

Taking down cement or cement lime plaster in any description including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed by Engineer in charge.

M & L for 15mm thick plastering in CM 1:4 on external surfaces stone or concrete surfaces with using water proofing compound finished even and smooth without using extra cement complete all as specified and directed by Engineer in charge.

M & L for three coat of white wash on new palstered or undecorated surface of wall including preparation of surface complete all as specified and directed by Engineer- in-charge.

M & L for complete removal of existing treatment including preparation surface by washing, rubbing down or on newly plastered surfaces and applying two coat of weather proof acrylic emulsion exterior paint over a coat of weather proof acrylic emulsion exterior primer. Make - (a) Asian Paint-Apex Ultima Protek (b) Berger Paint-weather coat smooth (c) Nitco Paint-Outshine premium 100% acrylic exterior (d) ICI Dulux - weather sheild exterior

Material and Labour for preparation of old surface of external walls with complete removal of existing treatmentand applying 2 coats of cement base paint over a coat of alkali resistant primer and shade match with old paint on other surfaces complete all as specified and directed by Engineer- in-charge. Make- (i) Super Snowcem (ii) Duracem (iii) Aquacem (iv) Shalimar (v) Berger

M & L for applying two coat of oil emulsion distemper over a coat of chalk whiting as preparatoy to distemper including prepration of new surface or unplastered surfaces of wall with applying 3mm thick wall care putty complete all as specified and directed.

M & L for applying two coat of oil emulsion distemper over a coat of chalk whiting as preparatoy to distemper including prepration of old decorated surfaces of wall with applying 3mm thick wall care putty by complete removal of existing treatment complete all as specified and directed. Make for item No : 16 & 17 - (i) Nerolac (ii) shalimar Paints (iii) jenson & Nicholson (iv) Asian Paint

M & L for applying two coat of white wash on old decorated surfaces of walls and cornices including brooming, scrapping down with steel scrapper smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc. complete all as specified and directed.

Dismantling of ceiling boards (fiber, pulp, insulation, etc.) or insulation boards/slabs/blankets any thickness, including cover fillets all as complete all as specified and directed by Engineer in charge.

S&F Anodised aluminium snap grid (605mm x 605mm) frame work with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long and including necessary bolts, nuts and washers for false ceiling complete all as specified and directed by Engineer in charge.

M&L for 6mm thick non asbestos fibre cement building building boards fixed or laid/ inserted to Aluminium framework with screws complete all as specified and directed by Engineer in charge. (Note:- Aluminium frame work considered in item No 28 above) Make for item No 20 & 21 : Everest / Armstrong

M&L for cutting holes in stone walls exc. half brick but not exc one brick built in cement mortar or in cement lime mortar for inserting holdfasts and making good dismantled portion incement mortar 1:3 orcement concrete 1:2:4 Type B-1 as required complete all as specified and directed.

M& L for dismantling of boarding of any description and fixed in any position with screws and refixing of 6mm thick non asbestos fiber cement building boards fixed or laid/ inserted to aluminium framework with screw including refixing of anodised aluminium snap grid frame work for false ceiling flat or sloping complete all as specified and directed.

M & L for applying two coat of OBD on new or undecorated surfaces of ceiling complete all as specified and directed.

M & L for applying one coat of OBD on old surfaces of ceiling complete all as specified and directed. Make for item No 24 & 25 : (i) Nerolac (ii) shalimar Paints (iii) jenson & Nicholson (iv) Asian Paint.

Taking down timber roof trussess clear span above 4m & up to 8m, coupled rafters or truss beam complete all as specified and directed.

S&F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings stging for water tanks and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of Fe 410-W (Gde E-250) quality A complete all as specified and directed.

Dismantling of post or struts (RCC) any section inclduing taking out embedded position of concrete and making good disturbed ground or portion complete all as specified and directed by Engineer in charge. Dismantling of timber scantlings 40 sq. cm and over in section, in any position fillets, rails, posts, rafters, purlins, etc in unframed works complete all as specified and directed. (Note:- If flooring tiles of barracks passage will broken at the time of dismantling of post or column, contractor will rectify the same and match with previous flooring neat and clean on his own expence. No extra payment will be admissible for the same)

S&F compound girders and stanchions, coloumns, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, slices etc. built up from two or more beams or channel sections or angles with plates, including all lattice bars and, stiffeners, gusset plates etc. complete all as specified and directed.

Material and Labour cement concrete Type B2, 1:2:4 (using 40mm graded aggregate) in foundation filling and mass concrete in any position complete all as specified and directed by Engineer- in-charge.

S&F for rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410-W (Gde E-250) quality A complete all as specified and directed.

M&L for Preparation of new steel surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Preparation of new steel surfaces not exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Make for item No 32 & 33 : (a) LUXOL (Berger paint) (b) BROLAC (Jhonson & Nicholson) (c) SUPERLAC (Shalimar paints) (d) NEROLAC (Goodlass Nerolac) (e) APCOLITE (Asian Paints).

S & F Mild steel flat iron as in hold fast 25x6 mm confirming to Fe 290 Gde E-165 complete all as specified and directed by Engineer- in-charge.

Demolition of PCC not Exc 15cm thickness ( below and above ground level ) including floor finishes complete all as specified and directed by Engineer in charge.

Material and labour for 75mm thick PCC 1:3:6 type C2, using 40mm graded stone aggregate as in plinth protection, surface finished even and fair without using extra cement complete all as specified and directed by Engineer in charge.

M & L for 75mm cement concrete type D2, 1:4:8 using 40mm graded aggregate as in sub base of floor complete all as specified and directed by Engineer in charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tile to store and rubbish off the premises complete all as specified and directed by Engineer in charge.

M & L for Coloured non skid ceramic tile 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match,including 20mm thick screed bed in CM 1:6 complete all as specified and directed by Engineer in charge.

M & L for coloured glazed ceramic tiles 300mmx200mmx6-7mm set & jointed in neat cement slurry and pointed in neat cement slurry and pointed in coloured cement to match over 10mm thick plastering in CM 1:4 as a backing coat of vertical surface complete all as specified and directed by Engineer in charge. Makes for Item No 39 & 40 : M/s HR Johnson / M/s orient Bell Tiles / M/s Kajaria / M/s Somany Tiles Ltd / M/s Nitco tiles / M/s Swastik Tiles

Taking up or down GI Steel water tubing 25mm bore and connections including fittings from floor/walls/centrings complete all as specified and directed by Engineer-in -charge.

Taking up or down GI Steel water tubing 20mm bore and connections including fittings from floor/walls/centrings complete all as specified and directed by Engineer-in -charge.

Taking up or down GI steel water tubing 15mm bore and connections including fittings from floor/walls/ceiling complete all as specified and directed by Engineer- in-charge.

S & F Galvanised steel tubing 25 mm bore medium grade with all fittings and fixed complete to walls ceiling or laid in floors complete all as specified and directed by Engineer- in-charge.

S & F Galvanised steel tubing 20 mm bore medium grade with all fittings and fixed complete to walls ceiling or laid in floors complete all as specified and directed by Engineer- in-charge.

S & F Galvanised steel water tubing 15 mm bore medium grade with all fittings concealed including cutting chases to brick wall/ceiling or laying in floors and making good complete all as specified and directed by Engineer- in-charge. Makes for Item No 44 to 46- (a) Tata (b) Swastik (c) Jindal (d) Surya (e) Prakash (f) Indian Tube Company (g) Zenith (h) BST (j) GST (Gujrat Steel Tube)

Supply and fix stop valves, cast copper alloy 15 mm bore high pressure with crutch or butter fly handle for iron pipe or for union and complete fixed in repairs complete all as specified and directed by Engineer- in-charge.

All as per item No 47 above but stop cock fancy type CP with long shank and cup concealed type complete all as specified and directed by Engineer- in-charge.

Supply and fix stop valves, cast copper alloy 20 mm bore high pressure with crutch or butter fly handle for iron pipe or for union and complete fixed in repairs complete all as specified and directed by Engineer- in-charge.

Supply and fix stop valves, cast copper alloy 25 mm bore high pressure with crutch or butter fly handle for iron pipe or for union and complete fixed in repairs complete all as specified and directed by Engineer- in-charge. Makes for Item No 47 & 50 : Jaguar/Soma/leader/Zoloto/Sieco/Prima/Prayag/GMP/Neta.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) n.exc, 1.5 Sqm each (PVC door+Ventilator+window) complete all as specified and directed by Engineer- in-charge.

All as per Sl Item No. 51 here in before but exceeding 1.5 Sqm and not exceeding 4.00 Sqm each complete all as specified and directed by Engineer- in-charge.

S & F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed by Engineer- in-charge.

M & L for preparation and treating ends of posts, back of chowkats etc area of tarred exc 0.10 Sqm but n.exc 0.50 Sqm complete all as specified and directed by Engineer- in-charge.

M & L for preparation and treating small articles, area tarred n.exc 0.10 Sqm each such as hold fasts end of posts, back of chowkhats complete all as specified and directed by Engineer- in-charge.

Supply and fix solid PVC door frames of size 50mm x 47 mm made out of 5 mm thick plain/printed coloured PVC sheet reinforced with MS square tube all as per specification & drg in SSR Pt II 2004 complete all as specified and directed by Engineer- in-charge.

Supply and fix factory made solid panel PVC door shutter 30mm thick (styles) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC "C" Channel having a PVC sheet strip of 20mm width stuck inside with solvent cementfor styles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitten in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading & jointed together with solvent cement, complete all as specified and shown in drgs in SSR Pt II 2004 complete all as specified and directed by Engineer- in-charge. Makes for Item No 56 & 57: - (i) M/S Rajshri Plastiwood (ii) M/S Sintex Industries Ltd (iii) M/S Accucell (iv) M/S Dura Plast Extrusion

S/F aluminum anodized window shutter including frame having fixed and lovered type ventilator, any type (sliding or open-able ) with frame , & other similar work etc fabricated by using the JINDAL / CENTURY section including necessary arrangement for sliding and locking & to receive 3mm thick sheet glass or wire mesh with aluminium channel beading & stainless steel screws including the cost of rubber gasket / rubber beading and all necessary fitting like mortice lock, aluminium tower bolt, handle, stopper, hinges etc complete . But the weight of the rubber gasket / beading will not be measured with weight of aluminium shutter complete all as specified and directed by Engineer in charge. Note :- Sheet glass & wire mesh shall be measured & paid separately. Make : (i) Hindalco (ii) Indal (Indian Al Coy) (iii) Jindal (iv) Associated profiles & Aluminium Ltd (v) Ajit India.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/ Aluminium shutters/frames or stone, concrete or brick sorrounds, glazed with oil putty or fixed with beads.

Supply & fix sheet glass ordinary quality 4mm thick and glazed with oil putty or fixed with beads in square n.exc 0.5 Sqm in each pane complete all as specified and directed by Engineer- in-charge.

Supply & Fix 3mm thick figured glass, pin head type and glazing with oil putty or fixed with beads in suqares n.exc 0.5 Sqm in each pane complete all as specified and directed by Engineer- in-charge. Makes for Item No 60 & 61: - (i) Hindustan Pilkington Glass works (ii) Saint Gobin (iii) Modi Float (iv) Modiguard

Taking down shutters of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and directed.

S & F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels commercial type on both sides complete all as specified and directed by Engineer- in-charge.

Supply & Fix Alu. Anodised barrel tower bolts of extruded section 100mm long dia. complete all as specified and directed by Engineer- in-charge.

Suppy & Fix Alu. Anodised handle 150mm long extruded fabricated type complete all as specified and directed by Engineer- in-charge.

Supply and fix in repair of aluminium sliding door bolt with hasp & staple bolt type & fixing clips sheet cast of extruded section and fixing bolts 300mm size complete all as specified and directed by Engineer- in-charge.

S & F 100mm long stainless steel butt hinges complete all as specified and directed by Engineer- in-charge. Make for Item No. 64 to 67 : Classic/ Shalimar/ CLIF/ARGET

Preparation of new or previously untreated, wooden surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer- in-charge.

M&L for Preparation of old painted wooden surfaces and applying one coat of synthetic enamel paint complete all as specified and directed. Make for Item No. 68 & 69 : (a) LUXOL (Berger paint) (b) BROLAC (Johnson & Nicholson) (c) SUPERLAC (Shalimar Paints) (d) NEROLAC (Goodlass Nerolac) (e) APCOLITE (Asian Paints)

Demolition of RCC concrete of any description and in any position for portion ordered to be dismantled by Engineer in charge complete all as specified and directed.

M & L for RCC 1: 1.5 : 3 (nominal mix) type A1 20mm graded aggregate as in lintels, slabs staging for water tanks etc complete all as specified and directed by Engineer- in-charge.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M & L for TMT bars 10mm dia and over cut to length bent to shape reqd including cranking bending, spirally for hooping for columns, henking end and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer- in-charge.

Ditto all as per item No. 73 herein before but 6 to 8 mm dia bars as in distribution bars complete all as specified and directed by Engineer- in-charge.

Dismantling of water tank capacity exc 250 & n exc 500 Ltrs complete all as specified and directed by Engineer- in-charge.

S & F rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part -I (2000Ltrs) capacity complete all as specified and directed by Engineer- in-charge. Make- (i) M/s Sintex (ii) M/s Infra (iii) M/s Ashish Plast (iv) M/s Yash Engineering Works, Pune 09422007879 (v) M/s Plasto (vi) Polycon

Supply and fixing ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed for bore dia of pipe 25mm complete all as specified and directed by Engineer- in-charge. Make:- Jaypee/ GMP/ Neta/ Zolota/ Prayag polimer/ Symet

Supply & Fix in repairs white vitreous china squatting pan orissa pattern of size 580mm x 440 mm, with integral foot rest and WC (SP) Complete in lean concrete fixed in repairs complete all as specified and directed by Engineer- in-charge. Make:Neycer Kermag (Standard)/Hindware (Ist Quality)/ Parryware (Super Fine)/ Cera (Ist Quality) /Jaquar

Supply & Fix 110mm PVC (SWR) WC connector with lipring complete all as specified and directed by Engineer- in-charge.

Supply and fix PVC (SWR) pipes single socketed in any length fixed to wall or laid under floor of 110 mm dia jointed with solvent cement complete all as specified and directed by Engineer- in-charge.

All as per item No 80 here in before but dia of pipe 75 mm complete all as specified and directed by Engineer- in-charge.

Supply and Fix PVC(SWR) access door any, radius 110 mm bore complete all as specified and directed by Engineer- in-charge.

All as per item No 82 herein before but bore of pipe 75 mm complete all as specified and directed by Engineer- in-charge.

Supply and fix PVC SWR floor trap plain with grating including jointing with solvent cement, dia of outer 75mm complete all as specified and directed by Engineer- in-charge.

PTMT grating doom 100mm dia complete all as specified and directed.

S & F high density polythylene pipe (HDPE) of pressure rating 6 kgf/Sqcm fixed complete to walls, ceiling or in trenches or floors etc bore of pipe 32mm complete all as specified and directed by Engineer in charge. Make for Item No. 79 to 86: Prince/Supreme/Kisan/Reliance/Finolex/Astral

Supply and fix in repairs PVC flushing cistern 10 ltr capacity high level with inlet ball valve float chain and pull and brackets and flush pipe 32mm dia PVC for high level PVC flushing tank complete all as specified and directed by Engineer- in-charge. Make: Commander/ Hindware/ Paryware/ CERA.

Supply and fix in repairs PVC connections 15mm size with PTMT nuts, 600mm long complete all as specified and directed by Engineer- in-charge.

Supply and Fix bib taps cast copper alloy, fancy type CP with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferule and fixed of size 15mm bore in repair complete all as specified and directed by Engineer- in-charge. Make : Jaguar/Soma/Leader/Zoloto/Sieco/Prima/Prayag/GMP/Neta

Supply and fix in repairs urinal bowl type complete including providing and fixing plug bedding urinal against wall in cement mortar 1:2 securing urinal to plug with and including 60mm long brass screws pointing around urinal back in cement, including 15mm brass stop cock and waste coupling brass CP, (Urinal bowl flat back size of 465x355x265mm) white, with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed by Engineer in charge.

S & F in repair vitreous china wash basin, white flat back size 550 x 400mm including brackets,cutting for and pinning in ends of brackets and 32mm brass CP waste fittings etc complete; fixed in repais complete all as specified and directed by Engineer- in-charge. Make for Item No. 90 & 91 : Neycer Kermag (Standard)/Hindware (Ist Quality)/ Parryware (Super Fine)/ Cera (Ist Quality) /Jaquar

S & F in repair pillar taps, chromium plated fancy type cast copper alloy, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or cold with long screwed shanks and fly nuts screwed for iron pipe of bore 15mm complete all as specified and directed by Engineer in charge. Make : Jaguar/Soma/Leader/Zoloto/Sieco/Prima/Prayag/GMP/Neta

S/F floor door stopper 150 mm long aluminium alloy body anodized with hard drawn steel spring complete all as specified and directed. Make : Classic/ Shalimar/ CLIF/ARGET

Supply & fix in Alu wire mesh 0.45 mm nominal dia of wire and width of aperature 1.40mm & fixed with aluminium wire staple.

Supply & Fix in repairs towel rails 60 cm long brass chromium plated 20mm dia with brackets fixed to walls in repairs complete all as specified and directed by Engineer- in-charge.

Supply and fixing of soap dish vitreous china coloured approximate size (160mmx160mmx90mm) fixed in repairs complete all as specified and directed. Make : Neycer Kermag (Standard)/Hindware (Ist Quality)/ Parryware (Super Fine)/ Cera (Ist Quality) /Jaquar

M&L for screed bed or bedding layer of mortar 20mm thick for laying floor finish in cm 1:6 complete all as specified and directed.

M&L Chequered cement colured tiles 20x20x25mm thick set & jointed & pointed in neat cement slurry in floors complete all as specified and directed by Engineer in charge. Make- (i) M/S Mehtab Tiles, Indore (ii) National Tiles (iii) Bharat Tiles and Engg Coy, Bangalore (iv) Modern Tiles and Marbles Bangalore

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed.

Excavating in trenches, n. exc. 1.5m wide and n. exc 1.5m in depth for foundation etc getting out hard/desne soil complete all as specified and directed by Engineer in charge.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25cm Hard/dense soil complete all as specified and directed by Engineer in charge.

Removing of surplus spoil n. exc. 50 M & depositing where directed at a level n. exc. 1.50 M above the starting level in soil complete all as specified and directed by Engineer in charge.

M&L for preparing new plastered or unplastered surfaces of wall and applying 2 coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed by Engineer in charge. Make- (i) Super Snowcem (ii) Duracem (iii) Aquacem (iv) Shalimar (v) Berger

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed bed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and beewax polishing and 20mm thick screed bed in CM 1:6 complete.

M&L for machine cut kota stone slab in riser of steps, skirting, dado 20-25mm thick on vertical wall aurface over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror wax polishing complete with 10mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for cement concrete 1:3:6 type C1, (20mm graded aggregate) as in copings, include for use of formwork complete all as specified and directed by Engineer in charge.

S&F curtain rails 19mm dia anodised aluminium alloy with brackets stops rollers etc complete all as specified and directed. Note - Bracket will be paid under different item.

S&F curtain rails brackets etccomplete all as specified and directed.

Supply only Integral water proofing compound of make IMPERMO/ ACCOPROOF complete all as specified and directed.

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, pendant, lamp holder, regulators, switch socket outlet, bulk head fittings, tube light fittings etc and removing unserviceable materials from site of work after credit for the same is recovered by the dept and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etc complete all as specified and directed by Engineer-in- Charge

Taking down carefully copper/aluminum submain wiring complete including copper/aluminium/GI earth continuity conductor etc and making good disturbed surfaces of walls, floors etc with cement mortar and white/colour wash to match with existing surfaces etc complete all as specified and directed by Engineer-in- Charge

Taking down carefully MCB DBs with MCBs of any size and capoacity along with teak wood boards including all fittings/fixtures etc and making good disturbed surfaces of walls, floors etc with cement mortar and white/colour wash to match with existing surfaces etc complete all as specified and directed by Engineer-in- Charge

M & L for Point wiring with 1.5 sq mm, PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including rigid non-metallic PVC heavy duty conduit (ISI mark), 19/ 20 mm dia or higher size as required at site including cutting chases for conduits, sinking for boxes for concealed conduit wiring or on surfaces of trusses by means of saddles & clips etc with all fittings and accessories with 16 SWG factory made pressed steel sunken box, totally concealed in wall with 3mm thick industrial laminated sheet top cover, fixed flush with wall surfaces by means of brass screws and sunk/ cup weashers for mounting of switches, sockets, fan regulators etc including unsheathed (FRLSH) single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to mettalic bodies of luminaries/fan etc at one end to common earth dolly at other end and making good to the disturbed surfaces to match the existing surfaces complete (fill up cement in gaps, finishing with putti and apply two coats of paint, match with existing colour in disturbed surface area), as per IS specification and as specified in SSR Part-I complete for one light point controlled by one switch complete all as specified and directed by Engineer-in- Charge

Ditto all as per item No.114 but One ceiling /exhaust fan controlled by one switch

Ditto all as per item No.114 but One 5 pin socket point 5 Amps on independent board controlled by one switch

Ditto all as per item No 114 but One 5 pin socket point 5 Amps controlled by one switch on same board

Ditto all as per srl item No 114 here-in-before but for one socket point 15 Amp with 2.5 sq mm PVC unseathed FRLSH wire along with 2.5 sq mm green colour wire as earth contuinity conductor complete all as specified & as directed by engr-in-charge. NOTE for Item no. 114 to11 8 Make of Cable : (a) Havells (b) Finolex (c) Nicco (d) Plaza (e) Polycab (f) RPG (g) GLOSTER Make of PVC conduit- (i) Anchor (ii) Modi (iii) Pressfit (iv) Precision (v) Astral

S & F Switch piano, flush type, single pole, one way 5 Amp, white finish complete all as specified and directed by Engineer-in- Charge

S & F Switch piano, flush type, single pole, one way 15 Amp, white finish complete all as specified and directed by Engineer-in- Charge

S & F switch socket outlet, 5 Pin, 5 Amps, flush type, white finish complete all as specified and as directed by Engineer-in-Charge.

S & F switch socket outlet,2 in 1, 5/15 Amps, 3 pin, flush type, white finiosh complete all as specified and as directed by Engineer-in-Charge. Make : (i) Anchor (ii) Crabtree (iii) Leader (iv) Legrand (v) Havells (vi) C & S Electric Ltd

S & F ceiling fan regulator AC, 230 volts, electronic rotary step socket type, 5 speed step type regulator complete all as specified and as directed by Engineer-in-Charge.

S &F ceiling rose in repair, surface bakelite 65 x 20 mm, three terminals complete all as specified and directed by Engineer-in- Charge

S & F angle holder, PVC/Polycarbonate with back plate suitable for batten/angular fitting, complete all as specified and as directed by Engineer-in-Charge. NOTE for Item no. 119 to 125 Make :(i) Anchor (ii) Crabtree (iii) Leader (iv) Legrand (v) Havells (vi) C & S Electric Ltd

S & F B 22 base LED bulb, 13/15 Watt complete all as specified and as directed by Engineer-in-Charge. NOTE Make :(a) Phillips(b) Havells (c) Osram (d) Wipro (e) Bajaj (f) GE

S & F in metallic sheet metal enclosures, double door, for DBs when MCBs to be used, 240 volts, 8 way with 200 Amps rated bus bar, single pole and neutral, fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/ thimbles duly crimped for connection complete all as specified and directed by Engineer-in- Charge Make: (i) Larsen & Tubro (ii) Siemens (iii) Schneider (iv) ABB (v) Havells (vi) Legrand (vii) Indo ASIAN (viii) C & S Electric

S & F in repairs MCB SP , 240 volt, 6 to 32 Amps, 10 KA capacity, C series complete all as specified and directed by Engineer-in- Charge Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB

S & f in repairs MCB SPN , 240 volt, 16 to 40 Amps, 10 KA capacity, C series complete all as specified and directed by Engineer-in- Charge Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB NOTE for Item no. 127 to 129 Make: (i) Larsen & Tubro (ii) Siemens (iii) Schneider (iv) ABB (v) Havells (vi) Legrand (vii) Indo ASIAN (viii) C & S Electric

M & L for Submain wiring complete with and including 2 runs of 6 sqmm single core FRLSH PVC insulated and unsheathed multistranded copper conductor cable single core 1100 Volts grade and 6 sqmm green colour FRLSH PVC multistranded copper conductor cable as earth continuity conductor and connected to common earth dolly for housing the wires, drawn through and including PVC conduit of dia 19/ 20 mm dia or higher size as required at site totally concealed in walls/floors/ceiling or on surfaces of trusses by means of saddles & clips etc with all fittings and accessories complete all as specified and as directed by Engineer-in-Charge. Note : 2 runs of 6 sqmm PVC insulated cable and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one unit length. Make of Cable : (a) Havells (b) Finolex (c) Nicco (d) Plaza (e) Polycab (f) RPG (g) GLOSTER Make of PVC conduit- (i) Anchor (ii) Modi (iii) Pressfit (iv) Precision (v) Astral

M & L in repairs for earthing complete with galvanized steel plate electrode 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 deep below ground level with top edge of the plate not less than 1.50 m below ground level, connected to galvanised earth lead wire 4mm dia (upto 7.5mt), by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified incl excavation and earth work and disposal of surplus soil incl 15 mm GI tubing medium grade and necessary fitting for protection of lead wire incl laying of charcoal dust and common salt PCC (1:3:6) type C-1 using 20mm graded stone aggregate earth pit with 40x40x6mm MS angle iron frame, RCC cover 40mm thick (1:2:4) type B-0 using 12.5mm graded stone aggregate reinforced with 6 mm dia round bar @ 75mm C/C both ways with MS handle 12mm dia, plastering 15mm thick CM (1:6) internally and upto 150mm below ground level externally, PGI funnel with 20mm dia GI pipe med grade for watering and wire mesh complete all as specified and shown on electrical plate No 3 of SSR Par tI (2009) and connected to earth test incl testing complete all as specified and directed by Engineer-in- Charge Note :- (i) GI watering pipe of 20 mm bore light grade and earth lead protection pipe upto 7.5 Mtr shall be included in item quoted rate.

M & L for cutting/boring of PCC /Hard standing at a depth, not more than 15cm deep and 15cm in breadth for passing earthing conductor and making good the disurbed surfaces with PCC (1:2:4), type B) or cement mortar (1:3) complete all as specified and directed by Engineer-in- Charge

S & F in repair GI Tubing, light grade, 15mm dia for protection of cable on wall, trenches/floors, road crossing complete including fittings complete all as specified and directed by Engineer-in- Charge. Make- (a) Tata (b) Swastik (c) Jindal (d) Surya (e) Prakash (f) Indian Tube Company (g) Zenith (h) BST (j) GST (Gujrat Steel Tube)

M & L earth continuity conductor or main earthing lead 4mm dia GI or steel wire, fixed to wall or recess or chases or buried in ground or drawn in GI pipe or fixed to poles or any other indicated situation for loop earthing etc. as required including clamping jointing complete all as specified and directed by Engineer-in- Charge.

S & F in repairs 22 watts LED tube light fitting for surface or wall mounted LED batten with polycabonate housing & integrated electronic driver of 22 watt LED luminaires with lamp and electrically connecting with three single core 23/0.0076 PVC insulated, multi strandard, copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) and one for earthing complete all as specified and directed by Engineer-in- Charge. Make:- Havells Delite Plus Tube Set , Model No. LHEXBTP7IN1S022 or in equivalent model in WIPRO / Philips/ GE/ BAJAJ

S & F in repairs LED Street light fitting 20 watt, new generation energy saving & enviormental friendly long lifie, versatile pressure-die-cast aluminum IP65 Roadway luminaire with mid power LEDs as light source & electronic driver of capacity 20W LED 5700K complete all as specified and directed by Engineer-in- Charge. Make - Havells, model- ENDURAPEARLSL20WLED757SASYTOPC or in equivalent model in WIPRO / Philips/ GE/ BAJAJ/CROMPTON

M & L for bracket made out of GI pipe 25 mm dia medium grade, 0.6 metre long, bent to shape fixed with MS flat iron clamps made out of 40mm x 6mm thick, nuts, bolts complete all as specified and directed.

M & L for Cutting chases for ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., pinning in, making good to facings in brick walls where required and pointing in cement mortar 1:3 and making good, cutting not exceeding 10 cm girth complete all as specified and as directed by Engr-in-Charge.

S & F exhaust fan, AC, single phase, 230V, 300mm sweep, 1300 RPM, single phase with double ball bearing , 5 blade, metallic robust rust proof body & blade with louver for protection of bird and rain water including cutting round shape in wall, grouting the foundation bolt in the wall, making good the disturbed surfaces of wall including rendering, painting to match the existing surfaces and connection with three core copper flexible wire 23/0.0076 from ceilling rose/connector to fitting complete all as specified and as directed by Engr-in-Charge. Make- Crompton Greaves, Bajaj, Havels, Usha

M & L for taking down carefully old serviceable ceiling fan, in any position after disconnection of all electrical connections and putting in safe custody at AGE E/M store at Ponda and re-fixing the same after addn/altn of buildings by providing new ceiling fan down rod made up of 15mm GI tubing, medium grade, 1.5mt long (as required at site), threaded, welded and making necessary fixing arrangement like fan hook, clampsd, bolts and nuts complete required at site including provision of 3 core flexible wire connected from ceiling rose to ceiling fan and testing complete all as specified and as directed by Engr-in-Charge.

Supply, lay, connect and commissioning LT under ground cable, heavy duty, XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts, grade cross sectional area 10 sq. mm X 2 core in trenches or passing through pipes or fixed on saddle by means of nut and bolt including connecting with suitable size of cable glands lugs etc including taking down of old unserviceable cables complete all as specified and all as directed by Engr-in-Charge. Note : Excavation will be measured and paid separately under respective item. Make:- (i)Havells (ii)Universal (iii)Gloster (iv)Polycab (v)Asian Cable Co.(vi) CCI (vii) Finolex (viii) RPG Cables Ltd Notes:- (i) Earth work, Road cutting/Hard standing will measured separately on relevent items. (ii) All site should be cleared immidiately after cable laying.

Excavating in trenches, n exc1.5 m wide and n exc 1.5 m in depth; for laying of cables, n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and all as directed by Engr-in-Charge.

Returning, filling in including spreading leveling watering and well ramming in layers n.exc 25cm thick complete all as specified and all as directed by Engr-in-Charge.

Removing excavated surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and all as directed by Engr-in-Charge..

Supplying & laying DWC HDPE pipe of outer dia of 50mm and inner dia of 40mm polyethylene(PE) with smooth internal and profiled external surface for non pressure for underground cable including bends complete all as specified and all as directed by Engr-in-Charge. Make- (a) Rex Polyextrusion Ltd (b) Finolex (c) Prince Pipes and fittings ltd (d) Kisan (e) Supreme (f) JAIN IRRIGATION SYS (g) Astral

Supplying & fixing DWC HDPE pipe coupler for pipe of outer dia of 50mm and inner dia of 40mm polyethylene(PE) complete all as specified and all as directed by Engr-in-Charge. Make- (a) Rex Polyextrusion Ltd (b) Finolex (c) Prince Pipes and fittings ltd (d) Kisan (e) Supreme (f) JAIN IRRIGATION SYS (g) Astral

S & F GI Tubing, light grade, 40mm dia for protection of cable on wall, road crossing, under floor including fittings as required all as specified and all as directed by Engr-in-Charge. Make- (a) Tata (b) Swastik (c) Jindal (d) Surya (e) Prakash (f) Indian Tube Company (g) Zenith (h) BST (j) GST (Gujrat Steel Tube)

M/s Hari Construction

kajal construction

SHREE THATWAMASSY CONSTRUCTIONS PRIVATE LIMITED

pk janardhanan