MP LAD 2025-26 SUPPLYING AND INSTALLATION OF 12M HIGH MAST LAMP(6X150W) AT2ND WARD METTUPATTY SOUDAMMAN KOVIL GROUND IN CHINNALAPATTY TOWN PANCHAYAT.

HIGH MAST LAMP

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum

Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Supplying and erecting centering for vertical plain/ RCC concrete walls of supply channel, retaining wall etc upto 90Cm height with necessary supports,all cross bracing with mild steel size of 90cm x60 cm and gauge BG 10 stiffened with welded mild steel sheet angles of size 25 mm x25 mm x3mm for bearing laid silver Oak/ Country wood joist of size 7.50 cm x5.0 cm spaced @ about 90 cm C/C and supported by Casurina props of 10 cm to 13 cm spaced @ 75 cm C/C etc,, complete complaying with standered specfications and as directed by the departmental officers. - Plinth Beam

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever

Brick work in CM 1:5 (one cement & five sand) using II class ground moulded bricks of size 9"X43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT

Dadooing walls with Glazed tiles of sizes 300mm X 200mm X 6mm size of approved make and quality and colour Set in cement mortar 1:2 (One part of Cement and two part of M. Sand) over 10 mm base layer plastering and pointing with white cement neatly as directed.

Supply, Delivery,Erection and Commissioning of 12mt GI octangle light pole as per dimension - top dia 70mm, bottomdia 140mm,section-1(section length-10000m) thick 3mm. Baseplate 250mmX250mmx16mm with 4nos of M24 dia bolt(4nos) with safetyladder PCD 250mm with suitable RC works ,with 32AMps 2 pole MCB with MCB DB BOx and Door Arrangements at the bottom of the pole and Round ring arm at the top of the pole suitable for fixing of Flood light luminaries. 8 Nos of 150W LED flood lumiaries complete set with cast aluminium housing and anodized reflector complete with IP65 protection glass with necessary wire connection complete set as per standard specification. 7/20 CTS copper wiring from light pole to service box for power automatic ON/OFF timer switch box with 24x7 hrs programmable digital timer clock, 40 Amps, 4 pole contractor with 220 Volt Coil 64 Amps Miniature, Circuit Breaker, 16 Amps Neutral link fully wired with fibre glass wire 40 Amps double pole ISOLATOR main switch, 63 Amps fuse carrier, Fully wired on a wooden board in 1 Zinc coated box with lock and key arrangements and necessary clamps and angles with bolts and nuts etc complete 1x11.00 Nos (SOR PWD-2025-26) Unique Code-M2137

Supply and fixng of TNEB meter board suitable for 3 phase 63A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 63A fuse units (500V), 1 No. neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with 1 No 63 Amp 30 MA Four Pole RCD / RCCB (Higher End) with suitable necessary connection with earth connection complete (SD 131) SOR/PWD-Electrical Data 2024-25

Supply and Laying of 2x6sq.mm PVC LTUG Aluminium armoured cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refitting the earth to make good (SD 175) SOR / PWD -Electrical Data 2024-25)