REPAIR OF DRAIN, COMPOUND WALL, FENCING, HARDSTANDING, PATH, REPAIR OF SEPTIC TANK AND SOAKAGE WELL AT 738 TPT AND ADJOINING AREA UNDER GE (NORTH) UDHAMPUR

M&L for systematically cleaning of blockage of WC Indian / Orrisa / European type/ pattern and bathroom / kitchen including cleaning of Nahani traps/ gully traps/ floor traps by removing of all the mud/ sludge and getting out including cleaning of SGSW or CI pipe upto 1st manhole and depositng the sludge in a pit of suitable size at a distance not exceeding 50 metres from the gully trap and covering the same with the soil obtained from excavation of pit, complete all as specified and directed by Engineer-in-Charge. Notes :- (i) Rates for excavation and earth work shall be deemed to include in the quoted rates. (ii) The contractor or his authorised representative shall collect the complaints of all blockage from complaint cell/ Engr-in-charge daily and all complaints will be rectified by the contractor within same day and returne the complaint slip after completion of complaint and get receipt from concerned JE/Engr-in-charge. If he fails to complete the work within same day then a recovery will be made @ Rs. 50.00 per complaint per day. (iii) The work shall be done in foul conditions and necessary precautionary measures/ equipments to be adopted by the contractor and rates for the same shall be deemed to include in the quoted rates. (iv) Any damage caused during cleaning shall be made good by the contractor to the entire satisfaction of Engr-in-Charge without any extra cost to Govt.

M&L for systematically cleaning of the sewage lines including gully traps by passing ropes, knots, bamboo/ wire/ kandi rotary cleaner etc. for any type and dia of sewage pipe, complete all as specified and as directed by Engr-in-Charge.

Cleaning and desludging of manholes of any size, shape and any depth including pumping out liquid waste if any and removing all solid waste materials such as stones, bricks, pipes, plastic muds etc, pluggings/ diverting of flow if required and removing the debries outside MD land etc. including all precautionary and safty measures, complete all as specified and directed by Engineer-in-Charge.

M&L for cleaning and desludging of existing septic tanks for 10 users to 500 users and opening covers and including inlet and outlet chambers and soakage well, taking out sludge & sewage water in any form alongwith all other foreign materials by mechanical equipment or by way of other suitable means and removing waste material/ sludge etc. to a distance not exc 50 mtr including digging, burrying in ground (Qty of desludging taken out not exc 12.0 Cum and dewatering not exc 12.0 Cum from each septic tank), complete all as specified and directed by Engineer-in-Charge. Notes :- (i) The solid or semi solid sludge shall be burried in pits and fully covered with a layer of lime powder and earth. (ii) Rates quoted by the contractor shall be deemed to have considered all such contingencies including removal and refixing manhole covers. (iii) The work shall be done in foul conditions and necessary precautionary measures/ equipments to be adopted by the contractor and rates for the same shall be deemed to include in the quoted rates. (iv) Any damage caused during cleaning shall be made good by the contractor to the entire satisfaction of Engr-in-Charge without any extra cost to Govt.

M&L for de-watering of existing septic tanks for 10 user to 500 users and opening covers and including inlet and outlet chambers and soakage well, taking out sludge & sewage water in any form alongwith all other foreign materials by mechanical equipment or by way of other suitable means and removing waste material/ sludge etc. to a distance not exc 50 mtr including digging, burrying in ground (Qty of desludging taken out not exc 12.0 Cum and dewatering not exc 12.0 Cum from each septic tank), complete all as specified and directed by Engineer-in-Charge. Notes :- (i) The solid or semi solid sludge shall be burried in pits and fully covered with a layer of lime powder and earth. (ii) Rates quoted by the contractor shall be deemed to have considered all such contingencies including removal and refixing manhole covers. (iii) The work shall be done in foul conditions and necessary precautionary measures/ equipments to be adopted by the contractor and rates for the same shall be deemed to include in the quoted rates. (iv) Any damage caused during cleaning shall be made good by the contractor to the entire satisfaction of Engr-in-Charge without any extra cost to Govt.

Excavation in trenches, not exc 1.5 mtr wide and not exc 1.5 mtr in depth for foundation, shafts, wells, cesspits, manholes, pier holes etc. and getting out in any type of soil, complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25cm thick, complete all as specified and directed.

Removing excavated material (soils) to a distance exc 50 mtr but not exceeding 100 mtr and depositing where directed at level not exc. 1.5 mtr above the starting point, complete all as specified and directed.

Demolition and breaking up 150mm bore drain pipes (salt glazed ware, AC or reinforced pipes), set in cement mortar, complete all as specified and directed.

M&L for 150mm bore SGSW (salt glazed stoneware) drain pipe, Grade-A, laid in trenches and jointed in CM 1:1 and tested, complete all as specified and directed.

M&L for concrete bed in PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) to 150mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested, complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to open and rendering, cutting out existing benching for and forming branch channel 1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1, smooth finished and reforming benching, complete all as specified and directed.

Dismantling / taking out of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out from trenches/wall, upto & including of internal dia of pipe 100/75mm, complete all as specified and directed.

S&F 100mm bore sand cast iron soil, waste and vent pipes in any length with or without ears with cement joints, laid in floor or in trenches or fixed to walls, complete all as specified and directed.

S&F 75mm bore sand cast iron soil, waste and vent pipes in any length with or without ears with cement joints, laid in floor or in trenches or fixed to walls, complete all as specified and directed.

S&F in replacement of 100mm bore sand cast iron bends/ reducer/ Tee (any radius) with access door diminishing pieces or tapers (larger bore measured), complete all as specified and directed.

S&F in replacement of 75mm bore sand cast iron bends/ reducer/ Tee (any radius) with access door diminishing pieces or tapers (larger bore measured), complete all as specified and directed.

Taking down cement plaster of any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water including remaval of derbis from site, complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on fair face of brick work or concrete surfaces and finished the surface even and smooth without using extra cement, complete all as specified and directed.

Demolition of brick work or stone masonry, built in cement mortar including all quoines, arches, pillars etc. but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed.

M&L for brick work with sub class ‘B’, old size bricks, straight or curved on plan exc 6 mtr mean radius, built in CM 1:6, complete all as specified and directed.

All as per serial item No. 21.00 here-in-above but except bricks.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted stone masonry, built in cement mortar 1:4, complete all as specified and directed.

All as per serial item No. 23.00 here-in-above but except stones.

M&L for flush pointing to random rubble, uncoursed on brought upto course stone masonry or concrete block walling in cement mortar 1:4, complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in coping, benching, kneeler etc. including necessary formwork as required, complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in surface channel or drains including necessary form work as required, complete all as specified and directed.

Providing precast RCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in cover slabs for manholes with plain faces, finished fair and smooth, set in CM 1:6 including necessary formwork if required including demolition of old slabs, complete all as specified and directed.

M&L for mild steel TMT bars 8mm dia and over as in reinforcement for concrete, cut to length, bent to shape required including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and directed.

Demolition of cement concrete (unreinforced) as in ground floors and pavings, not exe 15cm thickness (below or above ground level), complete all as specified and directed.

M&L for chequered cement concrete tiles of size 30cm x 30cm x 25mm thick / 20cm x 20cm x 25mm thick each, coloured with grey cement and admixtures, laid / fixed over and including 15mm thick screed bed in cement mortar 1:4, set, jointed and pointed in neat cement slurry as in floors, complete all as specified and directed.

M&L for machine pressed rubber moulded manufactured/ compacted by vibrating table method precast concrete interlocking paver block, Laquor finish, any shape and size, confirming to IS:15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment and joints filled with sand, complete all as specified and directed.

M&L for sand filling under floors or in foundations or under paver blocks including watering and consolidation, complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base, floors, foundation and mass concrete etc, complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant cement base primer, complete all as specified and directed.