EI Work

Amount

Supply & fixing of 250V, 185W LED street light (CT- 5700K-6000K) fittings on existing 9 mtr Steel Tubular pole. Fittings should have warranty of 5 years (60 months). [Make: Philips- Greenline Xtra BRP322 LED 186 CW HONR FG S4 PSU GR/ Crompton FALCON_150W/Equivalent Product of Wipro] .

Supply & delivery of 250V, 120W (Maximum) LED street light (CT- 5700K-6000K). Fittings should have warranty of 5 years (60 months). [Make: Philips-SmartBright Essential BRP033 LED120 CW SLR GR PSU SPD/ Crompton RAPTOR PRO_120W/Equivalent Product of Wipro] .

Supply & delivery of 250V, 90W (Maximum) LED street light (CT- 5700K-6000K). Fittings should have warranty of 5 years (60 months). [Make: Philips- SmartBright Essential BRP033 LED90 CW SLR GR PSU SPD/ Crompton RAPTOR PRO_90W/Equivalent Product of Wipro] .

Providing CC (6:3:1) base block (around the pole) dimension 0.60x0.60x0.76 mt. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) incl. drilled hole in pole suitable for alkathene/polythene pipe entry, for street light wiring, without Loop Box

Supply and Fixing pole cap on existing 9 mtr MS swaged pole.

Fixing outdoor type Compound LED light fitting on wall including S&F 40 mm dia x 1.68 mts. long GI Pipe (ISI-Medium) bracket with 40 mmx10 mm thick, MS clamp etc. and providing wiring with 3x1.5 sqmm PVC insulated & sheathed wire (single core) partly in PVC conduit & partly through Polythine pipe throuh the bracket from loopbox to the fitting, without control switch, incl. making connections and painting.

Supply and fixing of GI Cable Loop Box with front side opening door and locking arrangement having 250 x 200 x 105 mm (Inside) dimension.Each have consist of the following materials EARTH Stud, 4 WAY Stud Type Power Terminal – 32A Fuse link with base (L&T/ Havells)- 1no

S & F 415V, 63A timer controller in SS double door 6 way TPNDB enclosure (Legrand Ekinox TPN DB Cat no 507662) comprising of 100 A Fully insulated busbar Copper for each phase, shrouded Neutral bar, Earthbar and Cable ties for Cable management and S & F of the following electrical accessories & front door locking arrangement with all connection, earthing attachment on wall as per direction of EIC. i) 63 A FPMCB ---1no ii) 24Hr programmable Digital timer (LK make Cat no 67DDT0)----1no iii) 3pole power contactor (LK make cat no MNX70/415 V)--- 1 no iv) Metal Din Channel MCB supporter---2nos v) 2 module plate with cover (Make-Legrand/ Myrius)--- 1no vi) 25A On-Off-On toggle switch--- 2 no vii) LED indication lamp--- 2 Nos viii) Outgoing connector make ELMAX--- 2 nos ix) Mechanical locking arrangement --- 1no x) Necessary connection with 1.5 sqmm copper wire.

Supplying & fixing medium gauge 32 mm dia GI pipe ( ISI-Medium) Protection with necessary MS clamps. (from muffing to loop box to muffing)

Supplying & fixing medium gauge 32 mm dia GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required (for road crossing)

Supplying of 40 mm dia HDPE PIPES pe 63, 8kgf/cm2. Make-supreme, type-SDR-11/Hensel/ Harse or similar make.

Supply and delivery of the following armoured stranded Aluminium Conductor cable. [Gloster/Mescab/Havells] 4 core 10 sqmm cable (from panel room to outside pole and to loop box on roof)

3 core 6 sqmm cable (for loop connection of compound light on roof and for power supply to new Glow Sign Board)

Laying 4 core 10 sqmm cable as below: Laying of cable on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

Laying on existing cable tray

Laying only Cable upto 50 sqmm through existing RCC/Hume/ GI Pipe/open masonary trench.

Laying 3 core 6 sqmm cable as below Laying cable on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

Laying only Cable upto 50 sqmm through existing RCC/Hume/ GI Pipe/open masonary trench.

Supplying and fixing compression type gland for Al. Armoured cable complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : 4 core 10 sqmm cable

3 core 6 sqmm cable

Excavation of soil and filling & ramming, for Soft Soil, as per GS. (0.150x0.450x80= 5.4) (WxDxLength ) (for laying of cable protection pipe)

Excavation of hard jhama metal /RCC road with electric operated vibrator machine and necy. Tools & tackles to pass the cable protection pipe and mending good the damages to original finish by filling with Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) and ramming. [For laying of cable protection pipe & for earthing of pole]

Supply and fixing 3 core 1.5 sqmm PVC insulated and PVC sheathed copper conductor cable in 19 mm dia 3 mm thick polythene pipe including supply and fixing of 19 mm dia 3 mm thick polythene pipe. [Make- Mescab/Havells/Polycab] [From loop box to fittings]

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required by 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC (for new and existing Glow sign board supply)

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. 2.5 sqmm

Earthing with 50 mm dia TATA medium GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground. (For existing 9 mtr pole)

Supply and delivery durable Heavy Duty Industrial Aluminium Extension Ladder conforming to IS 3696-2 (1991). The ladder should have closed height of approx. 15 feet and extended height approx. 30 feet. The load bearing capacity of the ladder should be not less than 150 Kg.

Painting of 9 meter Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint (i) 1st coat of aluminium paint over 1 coat of RO priming

(ii) 2nd coat of aluminium paint over 1st coat

B) Installation of new Glow Sign Board Supply & fixing of rectangular structure made of 75 x 25 x 1.2 mm thick hollow rectangular bar for fixing ACP sheet on front side and G.I. Sheet (22 SWG) on all other sides incl. necessary Al channel on all sides. The structure should have sufficient cross & radial support. The said structure should be welded on existing MS structure. Additionally the above structure have to be supported by 4 nos. 40x40x5 mm equal angle of length approximately 3.5 feet (2 nos at each end) and 40x40x5 mm equal angle (approx. 20 feet) as cross bar for support on the back side of the structure. The entire structure should be painted by synthetic enamel paint over 2 coats of red lead primer. The paint of the existing structure should be scraped out and should be repainted by synthetic enamel paint over 2 coats of red lead primer. The design should be approved by E.I.C. [approx. size 20’ x 3’ x 3’’-1 no. ]

Supply & fixing of 4 mm thick polyvenile coated Aluminium Composite Panel board (Aludecor / Alstone / Pratap Bond) of blue colour as the base for fixing raised letter duly fixed on the MS structure as per direction of EIC. The riser structure should be covered with ACP sheet incl. side portion on the board. [ 20ft x 3ft-1No.]

Supply & fixing of Superior Quality acrylic dimensional letters of sizes as given below on the pre- fabricated existing ACP board. The computerized processed letter in bold English fonts and milky white in colour shall be placed in horizontal line maintaining suitable space with Male & Female attachments for each letter and necessary interconnections as per direction of the EIC. The matter as follows and should be approved at the time of construction from the appropriate authority. [Upper Line] [Middle Line] [Lower Line] i) GOVERNMENT OF WEST BENGAL - [Total= 22 nos (6")]

ii) GARDEN REACH STATE GENERAL HOSPITAL - (10") iii) - (10") Total - 31 nos

iv) Z3/103, DR. A. K. ROAD, BADARTALA, KOLKATA - 700044 - [Total= 43 nos (6")]

S&F of imported 12 V DC IP-65 LED modules having three LED in a single base module and the LEDs will emit mild attractive blue colour light and the two run of LED for each letter base area and shall be properly fixed in the male part of the Acrylic letters including necessary interconnections. Specification of the LEDs is given as below: a) LED-white, GE/Samsung b) Type-Straight, 3 Nos. Led per module c) Life-70,000 burning hours. d) Visibility - 100 mtrs at least, for normal eye e) Power consumption 1.5 watt per module

S&F of imported heavy duty 12V DC, 400 VA SMPS power supply (Make-approved by EIC) with properly rated isolation transformer in suitable enclosure to be fixed with the signage frame for driving total LED system of the signage in a distributed manner for uniform load sharing in view of long run continuous use including necessary interconnections.

Hiring charges for scaffolding arrangement including ismantling at the end of work and carriage, for LC installation, per storey of building per vertical run

Transportation charges of Glow Sign board from workshop to installation site.

C) Repairing of Old Glow Sign Board Supply & Fixing Single LED T/L fittings inside the existing Glow Sign board incl. necy. Connnection with copper wire [Make- Philips TMC 501 P 1xT- LED/ Crompton or Wipro incl S&F 1 x 18 /20 watt Master LED tube lamp. Make: Philips, LED Tube 1200mm 18W 865 T8 or Wipro, cat no LL13-181-65SE or similar Specification of Crompton]

Painting of any steel/ iron surface with no. of coats of paints as given below with ready mixed paint/primer of approved make and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint (i) One coat of red lead/Zinc chromate priming

(ii) 1st coat of synthetic enamel paint over the primer

(iii) 2nd coat of synthetic enamel paint over the 1st coat

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required by 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC (for interconnection of tube lights inside glow sign board)

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. 1.5 sqmm (Make and model no. of each and every item to be approved by EIC) (Rates should be quoted inclusive of LWC, GST and all other related taxes and duties)

SIMPSON AND FERRIS PVT LTD (BID ID -5659803)

S. K. CHATTERJEE ELECTRICALS PVT LTD (BID ID -5657174)