SITC of Automatic Fire Detection and Fire Alarm system at INS Hamla RSU, Malad West, MTNL, Mumbai.

Amount

Supplying, Installing, Testing & Commissioning of Multi criteria Photoelectric Type Smoke Detectors i/c base complete as per attached specifications.

Supplying, Installing, Testing and Commissioning of polarity insensitive twin LEDs Response Indicators with suitable 16 Gauge MS Box/ ABS (Acrylo Nitrite Bitudine Styrene) box with die pressed anodized aluminum/ ABS (Acrylo Nitrite Bitudine Styrene) facia plate and LED mounted.

Supplying, Installing, Testing and Commissioning of Manual Push Button Station with Hammer & Chain (Pill Box) in Aluminum Cast/ M.S box as per specifications.

Supplying, Installing, Testing and Commissioning of polarity insensitive Electronic Hooter with speaker with ranges of 25 to 30 Mts. with 3 Watt speakers as per specifications.

Supplying, Installing, Testing & Commissioning of microprocessor based Main Control Panel as per specifications suitable for wall/floor mounting, fabricated from 16 SWG CRCA Sheet incorporating audio visual indications for each zone mains operated with 24 Volt sealed Maintenance Free rechargeable battery and battery charger complete as required as per specification attached. (Note: 4 nos. (2 NO & 2 NC) potential free points may be provided for extending infrastructure of fire detection alarm). a). 2 Zone Panel without PA system with battery of not less than 7 AH Capacity.

Providing & Fixing following type of Fire Extinguisher with hose of suitable length including first charge /refilling & providing Hook Hose Clamps etc. with ISI Mark on the Extinguisher a CO2 type (4.5 kg) wall mounting type.

Supplying & Fixing following size of PVC insulated PVC sheathed Copper Conductor FRLS Armoured Cable of 1.1 KV grade on surface i/c clamping as required. a) 2 x 1.5 Sqmm Cable (FRLS)

Supplying & Making End Termination with Brass Compression Gland for PVC insulated PVC sheathed copper Conductor FRLS Armoured Cable of 1.1 KV complete as required. a) 2 x 1.5 Sqmm Cable (FRLS)

Supply & Fixing of M.S. Box suitable for fixing of Detector Base complete as required.

Supplying & Fixing laminated floor plans mounted on hard board showing areas covered by each zone along with Control panel etc. complete as required at site.

Exit Sign Board Made out of 16 SWG CRCA Sheet Powder Coated Box housing electronic circuit with high intensity Red LED showing escape route by showing arrow, Operation in voltage 24 VDC of size 8" x 4"