SPPWNIT 1 AAREY 02

Amount

Part A Work Portion

Item No. 1: Cutting down branches of trees , bushes etc. stacking the material neatly as directed (For Motarable Road) PWD SSR 2022-23 Item No.1.21 Page no 14

Item No. 2: Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness.

Item No. 3: Excavator (JCB JS 80 ) Sr no.10 Page no 547

Item No. 4: Static Road Roller 8 MT Sr no.28 Page no 547

Item No. 5: Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed..PWD SSR 2022-23 Item no.2.11 Ref No.MORTH 301 Page No.23

Item No. 6: Supplying hard murum/ kankar at the road site, including conveying and stackingcomplete.PWD SSR 2022-23 Item no.2.29a Page No.25

Item No. 7: Spreading hard murum/ soft murrum/ gravel or kankar for side width complete.PWD SSR 2022-23 Item no.2.30 Page No.25

Item No. 8: Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 0.00 to 1.50 m.) By Manual Means PWD SSR 2022-23 Item No. 21.01 BDA1 Page No.153

Item No. 9: Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50m) By Manual Means PWD SSR 2022-23 Item No. 21.05 BDA2 Page No.153

Item No. 10: Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc.PWD SSR 2022-23 Item no 21.38 Ref No. BDA12 page no 157

Item No. 11: Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for foundation and bedding / steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) PWD SSR 2022-23 Item no 24.04 Ref No. BDE2 page no 175

Item No. 12: Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including Steel centering formwork, cover blocks laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)) PWD SSR 2022-23 Item no 25.15 Ref No. BDF3 page no 178

Item No. 13: Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite/quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork,cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)PWD SSR 2022-23 Item no 25.35 Ref No. BDF5 Page no 180

Item No. 14: Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)PWD SSR 2022-23 Item no 25.54 Ref No. BDF6 page no 181

Item No. 15: Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) PWD SSR 2022-23 Item no 26.19 Ref No. BDF11 page no 185

Item No. 16: Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) PWD SSR 2022-23 Item no 26.23 Ref No. BDF12 Page no 185

Item No. 17: Providing and fixing in position HCRM / CRS (Corrosion Resistant Steel) bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.PWD SSR 2022-23 Item No.26.34 BDF17 Page No.188

Item No. 18: Providing and applying two coats of protective membrane over the cured concrete surface like R.C.C. footings, columns, plinth beams etc. which will be submerged under soil so as to protect the same. Apply two pack coal tar epoxy system of Sunepoxy Coaltar of approved make & approved by Engineer in charge, having solid content ranges from 80- 100%, Tack free time 4-6 hrs. Recoat after 16-24 hrs. Mix Part A and Part B of Sunepoxy Coaltar of approved make & approved by Engineer in charge in 1:1 ratio with slow speed stirrer and apply the same on a clean R.C.C. surface by brush. Allow to set for 8-10 hours and apply the second coat. The rate to include for application at all levels to various RCC elements to the satisfaction of the EIC etc. complete. PWD SSR 2022-23 Item no 50.06 page no 329

Item No. 19: Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted/welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc.complete.PWD SSR 2022-23 Item No.23.01 BDC2 Page No.173

Item No. 20: Providing and erecting in position 1.5m high wire fencing with seven rows of barbed wire supported on already fixed M.S.Angles at 2.00 metres,centre to centre fastening the wire with quarter pins etc.complete (Rate Analysis is as per statement attach)

Item No. 21: Providing and laying weep holes of 100 mm diameter PVC pipes as per drawing for abutment returns, return walls etc. Complete. PWD SSR 2022-23 Item no.17.37 Ref No.BR Page No.132

Item No. 22: Providing expansion joints with 25mm thick bituminous pad as per detailed drawings etc. complete..PWD SSR 2022-23 Item no.14.33 Ref No.MORTH BR43B Page No.95

Item No. 23: Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 600mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2and curing etc. complete PWD SSR 2022-23 Item no.11.09Ref No.CD7 Page No.81

Item No. 24: Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 3.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary)

Item No. 25: Providing and applying epoxy paint primer with middle coat and top coat to superstructure including scaffolding etc complete.

Item No. 26: Removing any kind of debris including loading in truck and conveying to approved dumping point

Part B Testing & Royalty Charges

Item No. 28: BASIC TEST OF CEMENT - Standard Consistancy, Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength, Soundness Test

Item No. 29: BASIC TEST OF AGGREGATE - Water Absorption, Specific Gravity,Impact Value, Crushing Value, Sieve Analysis, Abrasion Value.

Item No. 30: FINE AGGREGATE - Fineness Modulus ( Sieve Analysis ),Silt & Clay Content, Chloride & Sulphate Content, Silt Factor.

Item No. 31: Concrete mix design by Accelerated curing method. (By Accelerated curing method)

Item No. 32: Compressive Strength OF C.C. Cube (Set of 3 cubes).

Item No. 33: BASIC TEST OF STEEL - Upto 16 mm (Set of 3 Bars)

Item No. 34: BASIC TEST OF STEEL - Above 16 mm (Set of 3 Bars)

Item No. 35: Royalty Charges for Sand are to be paid to the contractor after producing receipt of royalty paid to the Govt. for the material used for this work.

Item No. 36: Royalty Charges for Other Minerals are to be paid to the contractor after producing receipt of royalty paid to the Govt. for the material used for this work.

YOGESH CONSTRUCTION (BID ID -6632588)

Force Construction Pvt Ltd (BID ID -6631940)