VILLUPURAM - MEMORIAL BUILDING FOR 21 SOCIAL JUSTICE WARRIOR ELECTRICAL

Amount

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) ( 4 points / Coil) Higher End

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Higher End

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with painting of suitable colour for concealed PVC pipe Plug point ( 8 points / Coil) Higher End

Supply and fixing of Battern holder (bakelite) with 7 W LED lamp for BH point.

Supply and fixing of single box type 4' 18 W LED fitting complete with TW round blocks on wall or ceiling with 18 W LED tube light with Single side connection ( Havells / equivalant) with PVC unsheathed Copper leads from terminals to the fitting.

Supply and fixing of single box type 4' 18 W LED fitting complete with TW round blocks on wall or ceiling with 18 W LED tube light with Single side connection with conduit pipe suspension from the ceiling with PVC unsheathed copper leads from terminals to the fitting with tube.

Supply and fixing of Aesthetically desined ultra modern 24 W 1' x 1' High efficacy 1x1 Surface LED flat panel with high brightness LED for glare-free homogenous illumination. Also for POP ceilings LED fitting (Havels/ / Equivalent ) on wall or ceiling, with PVC unsheathed leads from terminals to the fitting.

Supply and fixing of Aesthetically desined ultra modern 15 W down Light (Havels / Equivalent ) on wall or ceiling, with PVC unsheathed leads from terminals to the fitting.

Supply and fixing of the 30 W LED Track light, along with necessary mounted accent light luminaire with compact housing and Gear Box fitting with 1 Mtr track on wall or ceiling with suitable necessary connections.

Supply and fixing of LED Indoor hanging light (Chandlier Light) lamp fitted on the ceiling with PVC unsheathed leads from terminals to the fitting.

Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting .

Supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 300 mm down rod on the existing fan clamp

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan

Supply and fixing of 1 no.6A two module 5 pin socket, 1 no. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End

Supply and fixing of 3nos.6A two module 5 pin socket, 3 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End

Supply and fixing of 1 no.6/16A two module socket, 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End

Supply and fixing of 20Amps DP Plug and Socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For AC Plug) (Legrand / Hager make).

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A DP MCB Isolator as incoming and 10 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A DP MCB Isolator as incoming and 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End

Supply and fixing of Vertical type 4 way Triple pole and neutral MCB Double door Distribution board in sheet steel enclosure with metal door with IP42 protection with 1 No. of 100A FP MCB Isolator as incoming 1 No 63A TP MCB, 2 Nos 32A TP MCB and 3 Nos. of 6A to 32A SP MCB outgoing on wall with suitable angle iron framework with Cable entry box on top or bottom with earth connection only. The MCB DB and MCB's should be with Legrand / Hager make only

Supply and fixing of Vertical type 4 way Triple pole and neutral MCB Double door Distribution board in sheet steel enclosure with metal door with IP42 protection with 1 No. of 32A FP MCB Isolator as incoming 12 Nos. of 6A to 32A SP MCB outgoing on wall with suitable angle iron framework with Cable entry box on top or bottom with earth connection only. The MCB DB and MCB's should be with Legrand / Hager make only

Supply and run of 2 of 1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling and making good of the concealed portion with suitable colour.

Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour.

Supply and Run of 2 of 4 sq.mm. (56/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour.

Supply and Run of 2 of 6 sq.mm. (84/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour.

Supply and Run of 4 of 10 sq.mm. (140/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 4 sq.mm. PVC insulated SC unsheathed copper wire with painting of suitable colour.

Supply and laying of 31/2 X 50 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.

Supply and laying of 31/2 X 25 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.

Supply and laying of 2 x 10 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.

Supply and clarnping of 31/2 X 50 sq. mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.

Supply and clarnping of 31/2 X 25 sq. mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.

Supply and clarnping of 2 x 10 sq. mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.

Supply and fixing of brass cable gland for 3 1/2 x 50 sqmm PVC armoured LTUG cable with earth connection

Supply and fixing of brass cable gland for 3 1/2 x 25 sqmm PVC armoured LTUG cable with earth connection

Supply and fixing of brass cable gland for 2 x 10 sqmm PVC armoured LTUG cable with earth connection

Supply and providing cable end termination of 3 1/2 x 50 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete

Supply and providing cable end termination of 3 1/2 x 25 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete

Supply and fixing of 3 Phase 100 A aerial fuse unit for 3 Nos 100 A fuse units (500V) on suitable MS sheet covered with 6mm thick hylem sheet on suitable angle iron work the tapping pole with necessary clamps.

Supply and fixng of TNEB meter board suitable for 3 phase 100A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1-1/2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 100A fuse units (500V), 1 No. neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with earth connection complete

Supply and insallation maintenance free GI Earthing System comprising of 50mm dia and 2 mtr. long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs. of carbon based environment friendly backfill compound and suitable clamp

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection

Supply and fixing of 40 A DP MCB in flush with sheet enclosure in wall with earth connection [Legrand (MDS) / Hager (L&T) make]

Supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 48W LED street light fitting with LED (Higher end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED steet light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour .

Supply and erection of Aesthetically designed decorative hot dipped galvanised mild steel step pole with grey powder finish.Compatible for all Havells post top range. Window - Plasma cut & duly chamfered opening window of 300x110 mm for terminal connections & mounting accessories. Window cover is fitted with allen screws to the pole of 4 mtr length with Aesthetically designed decorative pole base cover, enhancing the appearance of the pole with construction of Masonry pedestal with 1 1/4" G.I. pipe for supply cable entry in/out arrangements and fixing the SMC Junction Box fire proof and shock proof with suitable clamp of size 275 x 150 x 100mm with door and lock and key arrangements in corporating 1 No 10A DP MCB for control and 4 way connector on suitable hylem sheet to be housed in the above junction box with painting and supply and fixing of Aesthetically designed 50 W LED post Top with aluminium enclosure, powered with high power LEDs as lightsource and die casted heat sink exhibits classic Victorian look with symmetrical light distribution and excellent heat dissipation for long life. complete on 0.5 mtr of 32mm dia G.I. pipe (class B) with suitable cowl arrangements and using 3 Nos of bolt fixing on the above post including inter connection with PVC unsheathed leads with coil earthing complete.

Supply and erection of 8 W LED Bamboo LED Bollard fittings (Havells / Equavalent) with New generation, energy saving, environmental friendly, long life aesthetically designed aluminium landscape IP 65 luminaire for diffused lighting with high power LED as light source.

Supply and fixing of two way down modern LED Wall light with aesthtically designed on the compund wall.

Supply, Erection, Testing, Commissioning and Handing over of 1no 20 KVA Diesel Generator set (Make Kirlokar/Asoke Leylend/Cummins) of 0.8 P.F three Phase 415V/420volts,50C/S 1500 RPM CPCB Approved capacity compressing of Developing 56 BHP Water cooled clock wise rotating with 10 KW / 20 KVA operating capacity Brush Less Alternator close coupled underneath fuel tank ,standard safeties, LLOP With stop solenoid ,battery with lead ,Electric start and Anti Vibration mountings and accessories and AMF control panel as detailed below including transporting and Unloading charges (A) ENGINE : Water cooled diesel engine suitable for Generator application with a shaft output of 25.2 BHP 1500 RPM under NTP condition . The Engine Shall Comprise the following standard fitting flexible coupling, fly wheel,air cleaner, fan blower radiator, water pump, fuel filter and lubricatingoil filter etc (B) 12/24 Volt Electronic Starting Equipment Complete with Starter motor dynamo standard batteries with cable flexible exhaust piping of 50cms Length ( C ) Engine Instrument Panel / Mounted Starting push button /starting key lubricating oil temperature gauge lubricating oil pressure gauge water temperature gauge safety control for low lubricating oil pressure , safety control for high water temperature safety control for over speed ,Hour meter (mechanical) and RPM indicator battery charging ammeter. The engine should be cabable of providing 10% over load for one hour for every 11hours continous run at full load

D.ALTERNATOR: 20 KVA / 16 KW Capacity Brushless Alternator AC 3phase 50c/s 415/420V 0.8PF 1500 RPM under NTP conditions conforming to IS 13364 (part - II) 1992 to be means of coupling (E) Fuel tank : Fuel tank of 150 litrs a Capacity and with Inlet and Outlet connections level indicator with scale etc .., (F) .BASE FRAME: The Base frame should be Fabricated MS channel frame of rigidly welded constrution for mounting of Generator set . The Engine and Alternator should be coupled by suitably designed diaphragm type flexible coupling with guard and mounted on the base frame with proper alignment . (G) ACOUSTIC ENCLOSURE The Acoustic enclosure self standing weather proof KG - CPCB typed Acoustic canopy KG20WS floor mounting type with modular construction with the provision to assemble and dismantle easily ad designed to suit all weather conditions . Erection of Acoustic enclosure suitable 40 KVA Diesel Generator complete with all accessories as above and suitable supports etc ..., 1). Supply of manuals for Operation & Maintanence of DG set with Warranty card etc …,

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection

Supply and fixing of 100 A Change Over switch on suitable angle iron frame work with MS cable entry boxes with earth Connection only .

Supply and installation of 4k UHD 65" Interactive flat panel Display With Android Os consists of 1428.48 x 803.52 of Display Area, 16:9Aspect Ratio, Android 11 05 Type-ADS , 8ms Respones time, 3840x2160 Resolution, Viewing Angle 178Degree(H/V), 30000 Hours Life Time,I/O PORTS -HDMI IN-3, HDMI OUT-1, USB 2.0-1, USB 3.0-4, VGA in -1, AUDIO in-1, and USB Type-C-1, Touch 2.0-2 with Video mixing and safety arrangements Make and Model :Crown M22/ Raptor /Equivalent

Supply and fixing of 4 MP Fixed Mini Bullet Network Camera.High quality imaging with 4 MP resolution. Excellent low-light performance via powered-by-DarkFighter technology. Efficient H.265+ compression technology Clear imaging: Hikvision/equivalent

Supply and installation of 4U Metal Rack with front class door, Lock and Key, also with power manager.

Supply and installation of 6U Metal Rack with front class door, Lock and Key, also with power manager.

Supply and Installation of Switch 8 port POE Switch for CCTV IP camera with accessories. Make: Hikvision/equivale

Supply and installation of 8 channel 2-SATA NVR - (Network Video Recorder). Up to 16 Channel IP cameras can be connected. Supports decoding H.265+/H.265/H.264 Make: Hikvision

Supply and installation of 2TB visual HDD (Hard Disk Drive) with SATA interface. Engineered Specifically for surveillance security systems. Make: Western Digital/ equivalent.

Supply and Installation of 32" Full HD LED Smart Android TV. Make: Sony/Samsung/equivalent.

Supply and run of UTP Cat6 cable through suitable pipe in the wall/ceiling with necessary connection. Make : Dlink

Supply and Laying of ISI approved 20 mm PVC/Casing rigid pipe on wall and ceiling with painting of suitable colour.

Supply and installation of 240W amplifier which operates on Ac& Dc power with 7 Mic & 2 Aux Inputs,output taps of 4& 8 ohm,70V & 100V and frequency response of 50-15000Hz.IN Built Digital Player MP3 Player with USB SD and MMC Card Reader. Make and Model: Bosch/Equivalent.

Supply and installation of high fidelity 2-way speaker system with 163mm woofer,25mm tweeter,30W RMS, impedance of 8Ω on 100v line matching with power tapings of 30w,15w and frequency response of 80-20,000Hz. Make and Model: Bosch/ AHUJA / equivalent

Supply and installation of Handheld wireless perceptional microphone with wide frequency response of 50-16,000Hz and receiver. Make and Model: AHUJA 700U2 /Studio Master/equivalent.

Supply and installation of microphone with Stand shaft Make & Model Ahjua AUD 98XLR with DGN stand/ Equivalent

Supply and fixing of 12U Steel audio/Video equipment moveable Rack with which consists of all equipment and other accessories with front, back glass door lock/key facility

Supply and run of 2 core 1.5 sq.mm Speaker cable in 25mm PVC pipe of 1.8mm thickness with suitable base clamp on wall/ceiling with necessary connections.

Supply and run of 3 core 1.5 sq.mm microphone cable in 25mm PVC pipe of 1.8mm thickness with suitable base clamp on wall/ceiling with necessary connections

Supply and fixing of 230 V operation 1 KVA Voltage stabilizer with manul regulator audio equipments Make and Model: Studio master svc 1000 / equivalent

Supply and installation of 8 Port unmanageable 10/100/1000 Mbps switches with necessary connections. Make: D Link

Supply, Installation and termination of RJ 45 Cat-6 IO connector, Back box, face plate with surface mount metal box

Supply, Installation and termination of Cat 6 UTP Patch cord of 2 meters.

Supply and installation of 300 Mbps speed wifi router with Ethernet ports :2 10/100mbps LAN ports, 1 WAN port Make :TP Link/Tenda/D link

M/S FATHIMA ENGINEERING COMPANY

Padmavathi Electricals