Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.2 LAccepted-AOC 1ST FLOOR 100 FT ROAD NEAR HERO HONDA AGENCY OPP NARANG CHILDREN HOSPITAL BIBIWALA ROAD NORTH ESTATE | L1 | Accepted-AOC AWARD | |
| 2 | L2₹35.3 L+₹44,930 (1.29%)Rejected-Finance H NO 400 FLAT NO 13 A SEMATILLA DIMAPUR 797112 NAGALAND | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹36.3 L+₹1.5 L (4.19%)Rejected-Finance VILL PO MANOHAR CHHAPRA MOTIPUR DISTT MUZAFFARPUR PIN 843111 | MOTIPUR | MUZAFFARPUR | BIHAR | 843111 | L3 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹23.3 L
EMD Value
₹46,600
Closing Date
7 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE
GARRISON ENGINEER DANAPUR CANTT PIN 801503
SPL REPAIR TO BLDG NO P 01 OFFICE COMPLEX OF GE DANAPUR IN AGE BR II UNDER GE DANAPUR CANTT
2022_MES_537857_3
GE/DNR/T-36 OF 22-23 8606/E8
Open Tender
Civil Works
Item Rate
180 days
DANAPUR CANTT
AS PER NIT
8 documents required · 8 mandatory
₹500
GE DANAPUR
₹46,600
Yes
31 Mar 2023
11 Oct 2022
9 Nov 2022
11 Oct 2022
7 Nov 2022
25 Oct 2022
Amount
Dismantling of Lime Concrete (unreinforced) of any description incl tiles in any position of roof not otherwise specifically provided complete all as specified and directed..
Dismantling of timber scantlings 40 sqcm and over in section, in any position of unframed work complete all as specified and directed..
M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
~Ditto~ all as per Srl item No. 3.00 above but 5 to 8 mm dia TMT bars complete all as specified and directed.
M & L for providing reinforced cement concrete M-25 Design Mix using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and like complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)
M & L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exc. 200 mm thick horizontal or slopping in rough finished flat surface of concrete complete all as specified and directed.
M & L for use and waste of formwork to edges of concrete flats, treads, breaks in floor, window cills, concrete railing, opening in concrete wall, sides of RCC slab, RCC / PCC bends in walls or similar work thickness exc. 10 cm and not exc. 20 cm in rough finished surfaces of concrete complete all as specified and directed.
M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilvers, shelves inclding supports, overhangs,etc also splays between floors and beams, etc for rough finished flat surfaces of concrete complete all as specified and directed.
Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete all as specified and directed.
M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed
Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L rendering 15 mm thick on fair faces of brick wall in cement mortar (1:6) finished surface even and smooth without using extra cement, complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed. Note : Liquid WPC will be measured and paid separately.
Supply only water proofing compound (liquid),ISI marked complete all as specified and directed.
M&L rendering 10 mm thick in cement mortar (1:3) on ceiling/chajja's finished surface even and smooth without using extra cement, complete all as specified and directed.
M&L for preparation of newly plastered surfaces and applying two coats of oil bound distemper over a coat of primer including 2 mm thick Birla/ JK wall putty complete all as specified and directed.
M&L for two coat OBD over a coat of primer including 2mm thick Birla / JK wall putty on ceiling complete all as specified and directed.
M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint over a coat of primer complete all as specified and directed.
M&L for Preparation of old plastered surfaces of wall by complete removel of existing treatment and applying two coat of cement base paint complete all as specified and directed.
M&L for Preparation of old decorated surfaces of wall by complete removing of existing treatment and applying by roller application two coats Oil bound distemper over and including 2 mm thick Birla / JK Putty over a coat of primer of surfaces filing or cracks, holes on wall by putty etc complete all as specified and directed.
M&L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed
M&L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.
M&L for preparation of new or untreated steel surface of any description exc. 10 cm. in width or girth and applying two coats of synthetic enamel paints, over a coat of red oxide primer, complete all as specified.
M&L for Preparing surfaces of new wood and wood based materials of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Taking down chowkats or frames exc 1.5 Sqm but n.exc. 4 Sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed.
S & F steel window with side hung shutters including projecting or box stype hinges with steel handle peg stay and divided into square with glazing bars dovetailed or welded, to receive glazing, or gauzing including one coat of primer with including fixing of hold fast of size 25 x 5 mm flat iron etc complete all as specified and directed.
~Ditto~ all as per Srl item No. 26.00 above but without glazing bar
S&F 2nd class hard wood 35 mm thick glazed and gauzed skelton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed
S & F for Flush shutters 30 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed . Make Century Plywood / Kit Ply
S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing
S & F factory made solid Panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and gap insert for top and bottom rail; panelling of plain colour PVC sheet 5mm thick to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, all as per specification and drawing complete all as specified and directed.
S & F pressed steel frame of size 125 X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc., complete all as specified and directed.
M & L for plain cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate), as in back filling of pressed steel frames and similar work including necessary form work as required complete all as specified and directed.
M & L for plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate), as bed block, doping, cills, steps, kneelers, bed plates, apex stone kerbs and similar work including necessary form work as required complete all as specified and directed.
S&F Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed
S&F 200mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed..
S&F 150mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed..
S&F aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 300 mm long complete all as specified and directed.
S&F Aluminium handles, cast type, anodized 150 mm size comp ISI Marked complete all as specified and directed
S&F Butt hinges (ISI marked), medium weight, cold rolled mild steel of size 75 mm complete all as specified and directed.
S&F Butt hinges (ISI marked), medium weight, cold rolled mild steel of size 100 mm complete all as specified and directed.
S&F GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified.
S&F 3 mm thick sheet glass, ordinary quality, and glazing with oil putty in square/rectangle n exc 0.50 sqm in each pane, complete all as specified and directed
S&F mild steel, 300mm long ordinary helical door spring incl roller and roller plate complete all as specified and directed.
Dismantling of floor, walls tiles incl bedding but backing and rubbish off permises all as specified.
M&L for Non -Skid Ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm , in floors etc over and including 15mm thick screed bed in cement mortar 1:6. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed
M&L for Coloured glazed ceramic tiles (450 x 300)x 6 to 7mm thick (digital type) on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or colored cement to match complete including 10 mm thick rendering on fair faces of brick work or concrete surfaces, in cement mortar 1:4 all as specified and directed for shade, pattern and laying of tiles complete all as specified and directed.
M&L PCC 1:4:8 type D-2 (40mm graded agg) in fdn, sub base, mass concrete & cinder concrete etc. complete.
Supply and fixed Vitreous China wash basin white flat back size 450x300 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia,PVC flexible wastepipe of adequate length and dia and PVC connection 15mm size 450 mm length with brass CP nuts on both sides, all as spd.
Supply and fixing 15mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated , screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.
S&F in repair Bib taps, cast copper alloy, chromium plated , fancy type long body screwed down, high pressure, screwed for iron pipe or for brass ferrule of 15mm dia complete all as specified and directed.
S&F in repair 15 mm dia stop cocks, cast copper alloy, capstan head handle, screwed both ends for iron pipe or for unions complete all as specified and directed.
S & F in repair 15 mm dia angle cock, chromium plated, cast copper alloy, fancy type, screwed down high pressure with capstan head screwed both ends for iron pipe or for union complete all as specified and directed.
S&F in repair Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe complete all as specified and directed.
S & F in repair 600mmx450mmx6mm bevelled edge mirror mounted in 40mm wide PVC frame of approved size and colour on 6mm thick AC building board of commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed.
S&F in repair white vitreous china wash down water closet pan pedestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe complete all as specified and as directed. Make Parryware(Superfine), Cera (Ist Quality), Jaquar
S & F in repair PVC valve less, syphonic action type flushing cistern of 10 ltr capacity, low level with inlet, ball valve, float and handle including brackets incl PVC connection with CP brass nuts on both sides complete all as specified and directed.
Dismantling water tanks of capacity exc 250 and n exc 500 ltrs complete all as specified and complete all as specified and directed..
S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer hoisted and fixed in position all as specified in SSR Pt-I of 500 Ltr capacity including CP tank nipple complete all as specified and directed.
S&F Ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete all as specified and directed.
S & F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with brackets etc of 110 mm dia. complete all as specified and directed.
~Ditto~ all as per item Ser No 61.00 above but 75 mm bore complete all as specified and directed.
S & F PVC (SWR) bends any radius of 75 mm dia provided with access door complete all as specified and directed.
S & F PVC (SWR) vent cowl of 75 mm dia complete all as specified and directed.
S & F 75 mm bore PVC (SWR) floor trap, plain with grating including jointing to waste pipe, all as specified and directed.
S&F in repair two way angle cock 15 mm bore fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe. Make : Parryware/Prayag/Jaquar
S&F CP/PTMT grating 100 mm size (ISI Marked) complete all as specified and directed.
S&F steel tubular towel rail 20 mm dia "D" type 60 cm long between flange aluminium anodised.
S&F PVC connection 15mm dia size and 450 mm long with 2 Nos brass check nuts its washers complete all as specified and as directed.
Taking up or down steel tubing and connections, of 15 mm dia complete all as specified and as directed. .
S&F Tubes, ‘medium grade’ galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors of 15 mm dia complete all as specified and as directed. .
Removal of demolished material upto a distance of 5 km ( out of defence land) complete all as specified and as directed. .
M/S ANAND MOHAN ENTERPRISES
M/S ARVIND GROUP OF CONSTRUCTION & INFRASTRUCTURE
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .