Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.7 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST BIDEDER | |
| 2 | L2₹15.1 L+₹6,495 (0.43%)Rejected-Finance | L2 | Rejected-Finance BEING OTHER THAN LOWEST | |
| 3 | L3₹15.3 L+₹23,270 (1.55%)Rejected-Finance | L3 | Rejected-Finance BEING OTHER THAN LOWEST |
Tender Value
₹19.9 L
EMD Value
₹39,840
Closing Date
3 Jul 2023, 6:00 pmClosed
GE AF JAMMU
GE AF JAMMU
CA NO GE/AFJ-16/2023-24 REPAIR TO SUNKEN FLOOR WITH REPLASTERING OF EXTERNAL WALL CHAJJA REPAIR REPLACEMENT OF CI PIPE ETC IN CERTAIN MD ACCN IN PCDA NC COMPLEX AREA UNDER GE (AF) JAMMU
2023_MES_601172_1
CA NO GE/AFJ-16/2023-24
Open Tender
Civil Works - Others
Item Rate
JAMMU
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE(AF) JAMMU
₹39,840
Yes
12 Sept 2023
5 Jun 2023
5 Jul 2023
5 Jun 2023
3 Jul 2023
19 Jun 2023
Amount
Demolition of cement concrete (unreinforced) any description and in any position, not otherwise specifically provided for, all as specified and as directed by Engr-in-charge.
Dismantling of RCC roofs ,shelves, facia beams ,chajjas and similar suspended work etc complete all as specified and as directed by Engr-in-charge.
Taking down cement plaster up to 4th storey bldg ht.on Brick/stone walls and raking out joints, hacking for key, scrubbing down with water built in cement mortar complete all as specified and as directed by Engr-in-charge.
M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or over roof concrete surfaces mixed with integral water proofing compound finished even & smooth without using extra cement up to 4th storey bldg ht complete all as specified and as directed by Engr-in-charge.. Note : WPC shall be measured & paid seperately.
M&L rendering 10 mm thick in cement plaster 1:3 on ceiling surface finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge.
Material and labour for 15 mm rendering in CM 1:6 on fair face of wall or on concrete surfaces finished even and smooth without using extra cement complete all as specified as directed by Engineer-in-Charge.
M&L for making good the surfaces of chajja/Facia/ roof projection etc visible with reinforcement or not by providing PCC 1:2:4 type B-0, including one coat of bounding agent on rusted reinforcment and necessary formwork scaffolding required (hight of builing up to 4th storey) complete all as specified and directed by Engr-in-charge.
M&L for repairing of chajja, concrete floor , balconies by providing and applying of water proofing of 3 coat pidicrete URP with Fibre cloth (Make Pedilite) and 2 coat of membrane of star chemicals in cement mortar as per manufactural instruction and directed by Engr-in-charge. Including cleaning the concrete surface with wire brush or scruber to remove dirt and loose particals and repair concrete portion and priming of concrete suface by using above material. Note:-The work is to be carried out at height upto 10m.The contractor shall make necessary arrangement for the steel scaffolding and safety provision and the cost of the same shall be deemed to be included in the rate quoted rates by the contractor and nothing extra shall be admissible on this account.
RCC 1:2:4 type B-1 (20 mm graded stone agg) as in shelves, facia beams ,chajjs and similar suspended work including necessary form work , scaffoholding upto 4th storey ht. of bldg etc complete all as specified and as directed by Engr-in-charge.
TMT bars 8 mm dia cut length bent to shape required including cranking bending spirally for hooping for column , hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia as specified and directed.
Rendering 15mm thick in CM (1:3) on sunken concrete floor surfaces mixed with integral water proofing compound finished even & smooth with using extra cement complete all as specified and as directed by Engr-in-charge. Note : WPC shall be measured & paid seperately
Supply only integral water proofing compound ISI marked
M& L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as specified and as directed by Engr-in-charge.
M & L for APP polymeric membrane minimum weighing 3 Kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/sqm) land on primed surface by forced application complete all as specified.
M & L Plain cement concrete (1:5:10 ypeE-2 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete in sunken floors complete all as specified and as directed by Engr-in-charge.
S&F GI Tubing medium grade 40 mm dia galvanised with all fittings fixed to floor complete all as specified and directed.
M & L 25mm th PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in sub base, floors, paving complete all as specified.
M&L for colored non skid ceramic tiles 7to 8 mm thick, area of each tile exc 0.11 sqm but n exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in colored cement over and incl 15 mm thick screed bed or bedding layers of cement mortar 1:6 to match Shade, pattern, laying etc of tiles complete all as specified and as directed by Engr-in-charge.
M&L for 300x450 x7 mm thick glazed ceramic tiles colored as in dado/ skirting and vertical surfaces set&jointed in neat cement slurry and pointed in colored cement over and incl 10 mm thick cement mortar 1:4 to match the Shade, pattern, laying etc of tiles complete all as specified and as directed by Engr-in-charge.
Supply and fixing for vitreous china squatting pan,Orrisa pattern of size 580mmx440mm white with integral foot rests including connecting to 'P' or 'S' trap and to flush pipe incl all jointsd and making good to the floor etccomplete all as specified and as directed by Engr-in-charge.
S & F for viterous china wash down water close (Pedestral pattern) EWC white incl plastic water closet seat cover and mild steels chromium plated or aluminium hinging device and connecting to 'P' or 'S' incl flush pipe 32mm dia connecting with flushing rim complete all as specified and as directed by Engr-in-charge.
S&F for flush pipe if polyethylene of low or high density or PVC, 32mm dia for low level cistern complete all as specified and as directed by Engr-in-charge.
Taking down eaves gutters and rain water pipes (any size 75mm to 110mm of any pattern) ,of any description and in any position, including all fittings , heads, shoes, bends, swan necks, etc., (measured overall as fixed along the centre line over fittings and accessories)complete all as specified.
S & F PVC (SWR) pipes single socketed in any length with rubber ring joints in trenches bore of pipe 110 mm with PVC clamps and saddles including taking down existing (SGSW/PVC) pipe and fittings complete all as specified and as directed by Engr-in-charge.
S & F PVC (SWR) pipes single socketed in any length with rubber ring joints trenches bore of pipe 75 mm with PVC clamps and saddles including taking down existing (SGSW/PVC) pipe and fittings complete all as specified and as directed by Engr-in-charge.
S & F PVC (SWR) pipes 110mm single socketed , in any length with rubber ring joints fixed to walls complete all as specified and as directed by Engr-in-charge.
S & F PVC (SWR) pipes 75mm single socketed , in any length with rubber ring joints fixed to walls complete all as specified and as directed by Engr-in-charge.
S & F in repairs stack clamp cut of 50 x 5mm flat iron and 16mm dia round iron stays including bolt and nuts and securing ends of stay to water pipes suitable for 100 mm dia pipe including taking down unservicable clamp complete all as specified and as directed by Engr-in-charge.
S & F cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors / walls, 100mm dia, fixed in repairs, complete all as specified and as directed by Engr-in-charge.
S & F cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors / walls, 75mm dia, fixed in repairs, complete all as specified and as directed by Engr-in-charge.
S & F cast iron bend (any radius) diminishing pieces or tapers (larger bore measured) 100mm dia, fixed in repairs, all as specified and as directed.
S & F cast iron bend (any radius) diminishing pieces or tapers (larger bore measured) 75mm dia, fixed in repairs, all as specified and as directed.
S & F cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches 100mm dia, fixed in repairs, all as specified and as directed.
S & F cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches 75mm dia, fixed in repairs, all as specified and as directed.
S & F cast iron sockets (double) collars 100mm dia, fixed in repairs, all as specified and as directed.
S & F cast iron sockets (double) collars 75mm dia, fixed in repairs, all as specified and as directed.
S & F cast iron cowls 50mm dia, fixed in repairs, all as specified and as directed.
S & F PVC (SWR) door bends of any radius bore of pipe 110 mm all as specified and as directed.
S & F PVC (SWR) door bends of any radius bore of pipe 75 mm all as specified and as directed.
S & F PVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 110 mm
S & F PVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 75 mm all as specified and as directed.
S & F 110mm bore PVC (SWR) vent cowl all as specified and as directed.
S & F 75mm bore PVC (SWR) vent cowl
PVC (SWR) branch piece (single Y) equal or unequal 110mm bore all as specified and as directed.
PVC (SWR) floor trap , plain with grating including jointing with solvent cement all as specified and as directed.
PVC (SWR) reducers 110mm bore.
M & L 75mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in plinth protection, finished even and smooth with out using extra cement including forming and filling of joints 12mm wide with bituminous filler complete all as specified and as directed.
Dismantaling of wrought iron or mild steel work of any description not otherwise provided for framed work etc complete all as specified and as directed.
S&F framed work as in gates of angle or other section with gusset plates,rails,braces etc complete drilled for fixing of steel sheeting or other coverings.etc fastening and fixing Fe-410W all as specified and as directed.
S&F mild steel rolled ection in roof trusses (framed) trussed purlins,crane, gantries ,rails and fasterings and heavy bracket framing (Beam ,tee,angle channel or flat sections) including distance pieces,cleats etc confarming to Fe-410-W(Gde E-250) all as specified and directed.
M&L preparation on new steel surfaces of any description exc10cm width or girth including preparation and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.
Taking down steel tubing and connection 15 mm bore incl cleaning for refixing or removing from site complete all as specified and directed.
Taking down steel tubing and connection 20 mm bore incl cleaning for refixing or removing from site complete all as specified and directed.
M&L for GI tubing 15mm dia medium grade galvanised with all fittings fixed to wall and floor complete all as specified and directed.
M&L for GI tubing 20 mm dia medium grade galvanised with all fittings fixed to wall and floor complete all as specified and directed.
Refixing old steel tubing and connections in new or old positions (walls, ceiling, floor etc), bore of pipe 15 mm complete all as specified and directed.
Refixing old steel tubing and connections in new or old positions (walls, ceiling, floor etc), bore of pipe 20 mm complete all as specified and directed.
SCHEDULE 'A' PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder. :Note:-(i)The work is to be carried out at height upto 10m.The contractor shall make necessary arrangement for the steel scaffolding and safety provision and the cost of the same shall be deemed to be included in the rate quoted rates by the contractor and nothing extra shall be admissible on this account. (ii) The repair has to carried out as and when required basis and accordingly site will be available in piecemeal wise and as directed by Enginer-in-Charge in the PCDA(NC) Complex under GE(AF)Jammu.
PAKAYA BUILDERS AND DEVELOPERS PVT LTD
M/s Sunny Gupta
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .