COMPREHENSIVE MAINTENANCE OF B/R AND E/M SERVICES OF ALKAPURI, CQA (SV) AREA UNDER GE DEHU ROAD

Amount

Demolition of brick work built in cement mortar including all arches, pillars all quoins etc complete all as directed.

M & L for Pre - cast cement concrete 1:3:6 type C-1, (20mm graded stone aggregate) block masonary with solid blocks built in cement mortar 1:6 all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar.

M&L for Marble work green marble 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with green marble shade complete all as specified.

M&L machine cut kota stone slab flooring 20-25mm thick over and including cement screed based 15 mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting polishing and rubbing complete.

Dismantling wall/ ceiling boards(fibre pulp insulation etc.) or insulations boards /slabs/blankets any thickness incl. cover fillets and alum snip grid.

S & F Anodised Alu. Snap grid 605x605 mm frame wk for false ceiling and providing 9mm th Acoustical board/tiles for insulation 60x60 cm in size, fixed in celing with screws to frame work or with staples on snap grid including hangers 3 mm dia G.I. ( up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 X 3 mm size 60 mm long all as specified

Dismantling floor hearth or wall tiling incl cement mortar bedding/plaster (but not backing) and removing rubbish off the premises etc complete all as directed.

M&L for Non-skid coloured Ceramic tiles of size 300 x 300 x 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified.

M & L for ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.

All as per item No 11 above but on skirtings incl 10 mm th rendering in CM (1:3) complete.

M&L for vitrified ceramic coloured tiles (square/rectangular) polished area of each tile 0.30 sqm but n exc 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm th screed bed in CM 1:6 complete. complete all as specified and directed.

Ditto above item No 12 but on skirting over 10 mm th rendering in CM 1:3 complete.

M&L for glazed coloured ceramic tiles 350 mm x 250mm/450mmx300x7 to 7 mm thick as in vertical surfces set & jointed in neat cement slurry & pointed in coloured cement incl backing coat 10mm thick in CM 1:3 all as direced.

Demolition of concrete ( unreinforced ) in ground floors and paving nexc 15 cm thk (below or above ground level)

M & L 75 mm thk Cement conc type C-2, 1:3:6 (40 mm gr agg) as in plinth protection finished even and fair .

M & L PCC type D2 1:4:8 (40 mm Gr. Agg ) 75mm thick as in sub base complete all as specified.

M&L for laying machine pressed precast concrete interlocking reflective coloured pavers block any shape and size confirming to IS 15658-2006 of 55mm to 60mm thick, M-35 Grade over 30mm thick sand layer watering and ramming all as specified.

M& L Chequered Cement Concrete Tiles 30 CM x 30 CM X 25 mm th set and jointed in cement slurry and pointed in neat grey cement & pigment in floors over screed bed 15 mm thk in cm 1:6 .complete all as specified.

Taking down cement plaster of any description of brick or stone wall etc incl racking out joints and hacking for key, scrubbing down with water etc complete

M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick walls finished even and smooth w/o using extra cement.

M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or conrete surfaces finishing the surfaces even and smooth without using extra cement.

M&L for preparing new plastered surfaces & applying two coats of cement base paint on walls.

M&L for preparation of new surfaces plastered or unplastered new surfaces & applying two coats of oil emulsion distemper on walls.

M&l Complete removal of existing treatment of painted surfaces and priming with alkalie resistant priming paint & applying two coats of oil emulsion distemper on wall including preparation complete all as specified & as directed.

M & L for Preparing old decorated plastered of wall including cornices, pilasters etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of oil bound distemper complete all as specified.

M & L for Preparing old decorated plastered of ceiling including cornices, pilasters etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of white wash complete all as specified.

M & L Preparing old decorated plastered of wall of painted surfaces applying one coat of cement paint complete all as specified and directed.

M & L complete removal of existing treatment of painted surfaces applying two coats of cement paint complete all as specified and directed.

M & L applying one coat of synthetic enamel paint on old painted wooden surface over 10cm of width or girth incl preparation complete

M&L One coat of synthetic enamel paint on old painted steel surfaces over 10 cm width or girth incl prepration of surfaces complete

M & L for Preparing old decorated plastered or unplastered surfaces of ceiling including cornices, pilasters etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of white wash complete all as specified.

M&L for prepartion of old plastered surface of wall applying one coat of weatherproof acrylic emulsion exteroir grade paint on external surfaces complete all as specified.

M&L for prepartion of old plastered surface of wall applying two coat of weatherproof acrylic emulsion exteroir grade paint on external surfaces including a coat of alkali resistant priming paint complete all as specified.

Dismantling asbestos cement (corrugated/ semi corrugated etc) sheet in roof covering complete all as specified and directed.

Dismantling MS works of any Desc. Not otherwise provided for

S&F Tubular Sections as in main cross beams , hip and jack rafters; purlins, where connected to common rafter , posts etc. conf to Fe-410-w(gdeE-250 quality-A)

M &L for MS work as in wind tie or any other work incl cutting, drilling holes etc.

S & F 0.5mm thick corrugated pre painted / coloured galvalume sheet in roofing fixing all as per manufactures instructions with all fittings and accessories etc complete.

All as per above above but plain sheet fix in valley gutter / ridge

M&L for preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer.

Dismantling of PVC water tank of capacity exc 500 litre and n. exc 1000 litre and complete all as specified and directed.

Dismantling of PVC water tank of capacity exc 250 litre and n. exc 500 litre and complete all as specified and directed.

S&F rotational moulded Polythene (HDPE) double layer water tanks, cylindrical & vertical type 500 Litres capacity hoisted and fixed in position including provision of 20mm/15mm dia. spouts for connecting inlet, outlet, over flow and washout pipes.

All as per above but 1000 litres.

Disconnecting existing PVC water tanks of capacity 500 litres, setting aside (or lowering if required) for replacement complete all as specified and as directed.

Fixing only water tanks of capacity 500 Ltr incl cleaning and removing all scale and dirt etc from tanks and mouth of circulating pipes.

Disconnecting existing PVC water tanks of capacity 1000 litres, setting aside (or lowering if required) for replacement complete all as specified and as directed.

Fixing only water tanks of capacity 1000 Ltr incl cleaning and removing all scale and dirt etc from tanks and mouth of circulating pipes.

Taking down chowkats or frames with shutters exc 1.5 sqm but n.exc 4 sqm each and removing to store.

Taking down chowkats or frames with shutters ( without taking off shutters from the frame) n'exc 1.5 Sqm each.

S&F Anodised aluminium Powder coating frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F Anodised aluminium window and ventilator shutters,(three track) fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, srews with powder coating of any colour (Thickness or powder coating not less than 50 micron) including stainless steel wirecloth 0.36 mm nominal dia of wire and average aperture 1.40 mm and fixed with stanless steel wire staples. and 3.0 mm th sheet glass ordinary quality plain and glazing Complete all as specified and directed.

S&F stainless steel wirecloth 0.36 mm nominal dia of wire and average aperture 1.40 mm and fixed with stanless steel wire staples.

S&F 3.0 mm th sheet glass ordinary quality plain and glazing with oil putty in square n'exc .5 sqm in each pane.

S & F in repairs Ball brass valve high pressure with polythene float and nuts complete screwed for iron pipe or brass furrule bore of pipe 20 mm dia complete all as specified.

Taking up or down steel tubes and connections including cleaning for refixing or removal to stones bore of pipe 15mm.

All as per above but bore of pipe 20mm

M&L Supplying and laying of 20mm OD CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified

M&L Supplying and laying of 25mm OD CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified

S&F in repair stop valves fancy type cast copper alloy with capstan heads screwed down high pressure screwed both ends for iron pipe or union fixed for 15 mm dia GI pipe.

S&F in repairs bib taps cast copper alloy with capstan headsscrewed down, screwed for iron pipe or for brass furrule and fixed for 15mm dia pipe.

S & F in repairs pillar taps fancy type ,chromium plated with capstan heads screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15 mm dia pipe.

S & F in repairs Brass cromium plated with capstan headsshower rose of 125 mm dia complete all as specified.

S&F Grating round 140 mm size of PTMT (Minimum weight 50gms.)

S& F in repairs stainless steel Sinks kitchen or laboratory with plugs, washers and wastes; including beding in cement mortar overall size 495mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete including fixing cantilever brackets and connecting union to waste pipe; upto 0.5 sqm each complete all as specified. (Note : Stainless steel sink to be provided in lieu of ground cemented washing area, hence no credit)

S/F in repairs Vitreous china wash basin white flat back size 550 x 400mm including , waste pipe and plug and porcelain stopper and brackets incl cutting for and pinning in ends of brackets or erecting stand along with 32mm dia CP waste coupling and PVC waste pipe complete all as directed.

S & F for PVC connection pipe 15mm dia with PTMT nuts of length 450mm

S&F as in repairs PVC low/high level flushing cristern white 10 litre capacity incl PVC inlet pipe with brass check low level full both sides alongwith PVC flush pipe 32mm dia jointed to WC and handle incl bracats fixed in repairs all as directed. (Note:- Removing existing fluhing system of CI or any other quality incl brackets).

S&F in repairs plastic water closet seat, black / White closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging deivce.

S&F vitreous china squatting pan ORRISA PATTERN size 580x440mm white with integral foot rests excluding flushing cistem & fush pipe fixed in repairs .

S&F in repairs 25mm chromium plated aluminium alloy anodised curtain rails or pipes fixed to brackets complete all as specified and directed.

S&F aluminium anodised brackets for 25mm dia curtain rods complete all as directed.

S&F in repairs Vitreous China wash down water closet pan (Pedestal pattern) white complete incl seat and cover, flush pipe incl all joints complete

S & F in repair 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete

M&L For plain cement 1:2:4 type B2(usig 40mm graded stone agregate)as in Cement concrete in surface channels and drains complete all as specified.

Extra for forming fair finished drain or channel 60 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stoped ends etc.

M & L in repairs 18 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work as in cup board shutters, partitions, shelves and similar work. Complete all as specified and directed.

S&F External teak wood lipping 6 mm thick for 18/19 mm thick particles board, block board or veneered particle board fixed with nails. complete all as specified and directed.

S&F, 100mm size Hasp and staple, safety type aluminium anodized stove enameled black with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed

Providing and carrying out water Proofing treatment to toilet, sunkan slabs, wet areas ets, after proper surface prepration, carry out cementitious injection grouting at leakage point using cebex 100 plasticised expanding grounding admixture, application of polymer modified at slab wall junction using Nitoband SBR latex screen modifier cum bonding agent and application of two coat of brushbond RFX two part acrylic polymer modified cementitious elastomeric waterproof and protective coating etc, complete including 15mm thick cement plaster in CM 1:4 all tools and plant as per manufacturers specification including removal & refixing of fixtures complete all as specified and directed.

M&L cement concrete type E-2 1:5:10 using 40mm, graded brick agg as in sub base.

S & F in repairs CP grating 125 mm round fixed on floor / nahani trap fixed with 1:1 CM complete

M&L PVC (SWR) floor trap with grating including jointing with solvent cement 75mm bore dia

Demolition & breaking up drain pipes (SWG, AC, RCC etc) set in CM int dia of pipe 100mm with all fittings .

.- ditto - all as per item No. 36 above but 75mm dia pipe with all fittings.

S&F PVC pipes (SWR) single socketed in any length with rubber ring joints laid in trenches ,floor or wall for 110mm dia pipe

S&F PVC pipes (SWR) single socketed in any length with rubber ring joints laid in trenches ,floor or wall for 75mm dia pipe

S&F PVC (SWR) bend 110 mm dia all as specified and directed

S&F PVC (SWR) bend 75mm dia all as specified and directed

M&L for rendering 10mm thick in CM 1:4 on concrete surfaces over roof slabs with admixture of integral water proofing compound @ 3% by weight of cement (WPC shall be measured & paid seperately)

Supply only integral water proofing compound

M&L for cutting into existing manholes for connecting new drains making good to pipe & rendering, cutting. Out existing benching for & forming branch channel in cement concrete 1:2:4 type B-1 smooth finishing & reforming benchine as required for bore of pipe 150 mm. Complete all as specified and directed.

M&L for Reinforced precast Cement concrete cover slabs and manhole covers in 1:2:4 Type B-1 set and jointed in CM 1:6 Complete all as specified and directed. Note:- Reinforcement shall be measured and paid separately.

M&L for mild steel deformed bars 6 to 8mm dia cut to length, bent to shape required incl cranking, bending, hooking ends & binding with & incl mild steel wire (annealed) not less than 0.9 mm dia. Complete all as specified and directed.

S & F in repair for CI nahani trap/floor trap incl jointing to waste pipe fixed in cement concrete 1:2:4 (Type B-2), 75mm diameter with gratings incl taking down old broken traps. Complete all as specified and directed.

M&L for PCC type B-1, (1:2:4, using 20mm graded stone aggregate) as in sunken floor incl water proofing liquid @ 200ml per 50Kg cement. (water proofing liquid to be measured separately) finished even and smooth. Complete all as specified and directed.

Cleaning/clearing & Maintanance of sewage lines, manholes including CI stacks, incl under ground sewage lines any depth by removing any type of blockage from sewage drain upto and including 100mm dia by rodding or any other means from manholes to manholes or from trap and flusing with water after cleaning including manholes. Sludge/sludge water to be disposed off through sludge in form of semi solid/loose state will be disposed off by burring with in a distance not exceeding 250 metres outside the perphery of defence land including taking off manhole covers and refixing the same after cleaning. Sewage lines cleared/cleaned under this item is to be maintained and kept fully functional by removing any type of blockage.

Comprehensive Maintenance, including day to day maintenance of Alkapuri ,CQA(SV) area, for functioning the electric supply and repair/maintanence of internal fiting/fixture complet all as directed . The quoted rates shall be deemed to be inclusive of the following: (a) To attend day to day complain for repair/replacement of internal wiring, the internal fitting,fixture including controling system. (b)Repair/ Replacement of unserviceable internal light fittings of any type. (c ) Repair/ Replacement of unserviceable celling fan,exhust fan,wall mounted fan of any type. (d ) Repair/ Replacement of unserviceable MCB,MCCB,DB of any type. (e) Repair/ Replacement of unserviceable Eectric meter of any type. (f) Repair/ Replacement of unserviceable earthing system. (g) Immediate repair of non functioning of no light complain. (h) To maintain the electric circuit as per IE Rules / Standard Engineering Practice . (i) Providing the skil electrician and helper for repair/maintanence internal electric system. (j) Providing tools and safty equiptment for repair/maintanence of electric wiring. Note: (i) For no light complain to be rectify immediately as and when required. (ii) The unserviceable /repair fitting,fixture within same day or next day maximum. (iii) The quoted rate icluding the trades men,helper all equiptment/tools,ladder. (iv)The replacement items will be easured and paid in respective Sch "A" items. (v) Insurence for tradesmen/helper also included the quated rate. (vi) The service to be provided all arround the day including sunday and holiday. (vii) Replace the items in place of unserviceable items will be issued by the department as free for fixing) (viii) The Unserviceable items deposited to MES store yard

Supply the folowing items for day to day maintanence.

Supply Modular switch 1 way 6A,1 modul, 220 V. Make :Belno, Legrand,Crobtree.

Supply switch piano flush button single pole one way 6 Amps, 220 V. Make : Belno,Legrand,Havells

Supply Modular socket 6A-2/3 pin combined 2 modulas flush type 220 V Make : Benlo,Legrand,Crobtree.

Supply socket outlet 2 in 1,3 pin,5A flush type 220 V . Make : Benlo,Legrand,Crobtree.

Supply Modular switch 2 way 6A,1 modul, 220 V. Make : Benlo,Legrand,Crobtree.

Supply Modular Bell Push 6A,1 Module single pole 220 V. Make:Benlo,Legrand,Crobtree.

Supply Bell Push flash type,5A,single pole 220 V. Make:Benlo,Legrand,Crobtree.

Supply switch piano flush button single pole Two way 5 Amps, 250 V.Make:Benlo,Legrand,Crobtree.

Supply Modular multi socket 6A/16A-2/3 pin combined 2 moduls flush type 220 V .Make :Benlo,Legrand,Crobtree.

Supply socket 6A/16A-2/3 pin combined flush type 220 V .Make : Benlo,Legrand,Crobtree

Supply switch 15Ampa flush type 220 V .Make : Benlo,Legrand,Crobtree.

Supply for repairing Ceiling rose, surface bakelite, 65mm x 50mm two to three terminals.Make :Benlo,Legrand,Crobtree.

Supply switch Neion indicator flush type 220 V .Make : Benlo,Legrand,Crobtree.

Supply Modular Switch ,16/20 amp fush type 220 V .Make :Benlo,Legrand,Crobtree.

Supply Switch socket combination 2 in 1,3 pin,6 and 16 Amp flush type universal type 220 V . Make : Benlo,Legrand,Crobtree.

Supply Modular fan regulator stepped type Electronics regulator flush type on the existing 120 watts,220 volt, 2 moduls and connecting complete all as specified and directed .Make : Benlo,Legrand,Crobtree.

Supply Electronics dimmer piono switch type 400 watts,220 volt flush type. all as specified and directed .Make : Benlo,Legrand,Crobtree.

Supply Modular white cover plate with frame suitable for 1 modul. Make:Benlo,Legrand,Crobtree.

Supply Modular white cover plate with frame suitable for 3 modul. Make:Benlo,Legrand,Crobtree.

Supply Modular white cover plate with frame suitable for 4 modul. Make:Benlo,Legrand,Crobtree.

Supply Modular white cover plate with frame suitable for 6 modul.Make:Benlo,Legrand,Crobtree.

Supply Modular white cover plate with frame suitable for 8 modul. Make:Benlo,Legrand,Crobtree.

Supply Modular Metal flush box suitable for 1/2 modul.:Make:Benlo,Legrand,Crobtree.

Supply Modular Metal flush box suitable for 3 modul.Make:Benlo,Legrand,Crobtree.

Supply Modular Metal flush box suitable for 4 modul. Make:Benlo,Legrand,Crobtree.

Supply Modular Metal flush box suitable for 6 modul. Make:Benlo,Legrand,Crobtree.

Supply Modular Metal flush box suitable for 8 modul Make:Benlo,Legrand,Crobtree.

Supply PVC rectangular block for mounting,switches,sockets, fan regulator etc with 3mm thick plastick laminated sheet cover of size 100 mmx 100mm and 50mm deep.

Supply PVC rectangular block for mounting,switches,sockets ,fan regulator etc with 3mm thick plastick laminated sheetbcover of size 175 mmx 100 mm and 50mm deep.

Supply PVC rectangular block for mounting,switches,sockets, fan regulator etc with 3mm thick plastick laminated sheetbcover of size 200 mmx 150mm and 50mm deep.

Supply PVC rectangular block for mounting,switches,sockets, fan regulator etc with 3mm thick plastick laminated sheetbcover of size 250 mmx 200mm and 50mm deep.

Supply buzzer,Ding Dong AC 230 volts single pole.Make.:Benlo,Legrand,Crobtree.

Supply bell multi musis AC 230 volts single pole.Make.:Benlo,Legrand,Crobtree.

Supply lamp holder,PVC/Polycar bonate type with back plate suitable for batten fitting.Make-:Benlo,Legrand,Crobtree.

Supply Distribution board, SP&N vertical ,Prewired ,Netural links,blanking plates ,single door 8 way, with provision for MCB SP&N as incommer and SP/DB MCB as outgoing and electrically connecting up complete all as specified and directed.,Make : Bentec/Havells / Legrand

Supply Distribution board, SP&N vertical ,Prewired ,Netural links,blanking plates ,single door 6 way, with provision for MCB SP&N as incommer and SP/DB MCB as outgoing and electrically connecting up complete all as specified and directed. Make : Bentec/Havells / Legrand

Supply MCB SP 6 to 32 Amps 240 volts 50 HZ having 10 KA complete.Make : Bentec/Havells / Legrand

Supply MCB SPN 40 Amps 240 volts 50 HZ having '10 KA complete.Make : Bentec/Havells / L&T/Legrand

Supply MCB DP 40 Amps 240 volts 50 HZ having 10 KA complete.Make : Bentec/Havells / L&T/Legrand

Supply MCB TPN 40 Amps 240 volts 50 HZ having 10 KA complete.Make : Bentec/Havells / Legrand

Supply MCCB ,TPN,415 Volt AC 50HZ 100 Amps , adjustable braking capacity 10KA complete all as directed.Make : Bentec/Havells / Legrand

Supply only condenser 2.5 Mfd/3.5 Mfd capacity Make Make :Havells,HPL, Asian.

Supply only Capacitor 4Mfd suitable for exhaust fan of sweep 300mm/450mm complete all as directed. Make :Havells,HPL, Asian.

Supply Inverter LED batten 20 watt with square profile and polycarbonate channel. Lithium Ion battery with charging time 8hours-10 hours and back up time upto 4 hours..Make:-Havells,,Philips ,wipro

Fixing of decorative surface / wall mounted/ LED batten/wall/celling light of any type .Note : Material will be issued under Schedule"B".

Fixing of LED Lamp any type any capacity .Note : Material will be issued under Schedule"B".

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, sockets, light fittings, MCB DBs,outlet boxes etc.removing material for taking credit and making good disturbed surfaces with match colour of walls, floors, ceilings etc all as specified.

M&L for casing capping point wiring suitable for One Light/Bell/Fan point controlled by one switch complete with 1.5 Sqmm single core multistranded copper conductor FRLS PVC insulated and unsheathed cable 1100 V grade confirming to IS 694 drwan through PVC casing capping of size heavy grade ISI marked including necessary casing capping with accessories, heavy duty PVC terminal including 1.5 mm PVC insulated FRLS copper conductor as in continious earth wire.

All as per item No-149 here in before but one Light controlled by two-way switch .

All as per item No-149 here in before but one 3 pin 5 Amps socket outlet on independent board

All as per item No-149 here in before but one 3 pin 5 Amps socket outlet on same board

All as per item No-149 here in before but above but with 4 Sqmm wire for 15 Amp socket outlet on independent board.

Taking down unserviceable sub main wiring of any size complete and making good disturbed surface with match colour of walls/floors etc complete as specified.

M & L submain wiring with two single core through PVC insulated unsheathed stranded copper conductor 2.5 sqmm (nominal area) drawing through PVC capping casing and 2.5 sqmm stranded copper conductor cable PVC insulated and unsheathed (green colour) 1100 volts grade for earth continuity conductor and connecting with main earth dolly(Note : Cutting chases for counduit and sinking"s for boxes and makeing good to walls ,floors etc for sub main wiring will be measured & paid separately in respective items).

All as per item No-155 herein before but of size 2X 4 sq mm and 1X4 sqmm

All as per item No-155 herein before but of size 2X6 sq mm and 1X6 sqmm

Taking down the ceilling fan/wall mounted fan,Exhust fan from ceilling,wall,cleaning the dust,drit ,greashing,serviceing ,repairing and refixing the original positin all as directed. Note:- Necessary spare for repairing will be issuedby the department as free for fixing.

Taking down unserviceable Ventil Air DB Green Fans and deposited to MES store yard Supply and fixing Ventil Air DB Green made with and accessories,230 volt,50 Hz,rpm copper winding of sweep 230 mm including necessary arrangement for fixing on plywood in proper size all as directed.Make-Havells,Crompton

Taking down unserviceable Ventil Air DB Green Fans and deposited to MES store yard Supply and fixing Ventil Air DB Green made with and accessories,230 volt,50 Hz,rpm copper winding of sweep 300 mm including necessary arrangement for fixing on plywood in proper size all as directed.Make-Havells,Crompton

Taking down unserviceable Ventilating Fans and deposited to MES store yard Supply and fixing Ventil Air - DX White made with sturdy engineering plastic complet and accessories,230 volt,50 Hz,rpm copper winding of sweep 200 mm. including necessary arrangement for fixing on plywood in proper size all as directed.Make-Havells,Crompton

Taking down unserviceable Ventilating Fans and deposited to MES store yard Supply and fixing Ventil Air - DX White made with sturdy engineering plastic complet and accessories,230 volt,50 Hz,rpm copper winding of sweep 200 mm. including necessary arrangement for fixing on plywood in proper size all as directed.Make-Havells,Crompton

Taking down unserviceable ceiling fan and deposited to MES store yard and Supply nd fixing ceilling fan complete with blades, down rods,electronic regulator and accessories,230 volt,1200 mm sweep, min air delivery 210 CFM with service value BEE star rated.Make-Havells,Bajaj

M&L for earthing complete with galvanized steel pipe electrode,40mmbore,medium grade,2.5 Mtrers length,buried directly and preferably vertically in ground with top edge not less than 1.25 meters below ground leavle cinnected with earthing lead of 4mm dia galvanised iron or steel wire all as shwn in Plate no-2 to the earthing test point all as specified and indicated including testing on completion.

S&F in repair Smart Integrated Solar All In One with > 140Lum/W, 09 Watt power Rating, MPPT Charge Controller, Tiltable LED panel,Including Lithinim battery Adjustable AIO mounting angle, MonoCrystalline Solar Panel, PIR motion Sensor, easy to install. MAKE :- Crompton,Havells,Bajaj,Jaquar

Supply and fixing of Environmental friendly, energy saving long life corrosion resistant, vertical surface mounting pressure die-cast aluminium housing (light engine) well glass luminaires with high power LED as light source LED 40 watt.6500 K .Make:-Benlo,Havells,Philips.

Supply and fixing Slim recess mounting luminaire with octane Plus 2x2 Panel LED 36 watt edge-lit luminaire suitable for armstrong/grid ceiling complete for low ceiling applications complet all as directed.Havels all as directed.Make:-Benlo,Havells,Bajaj,Philips

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, sockets, light fittings, MCB DBs,outlet boxes etc.removing material for taking credit and making good disturbed surfaces with match colour of walls, floors, ceilings etc all as specified.

M&L for consealed point wiring for One Light/Bell point controlled by one switch, complete with 1.5 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 V grade confirming to IS 694 drwan through PVC conduit of suitable size heavy grade ISI marked including necessary conduit accessories, sunken type pressed steel terminal boxes with plastic laminated sheet of approved shade 3mm thick including 1.5 mm PVC insulated FRLSH copper conductor as in continious earth wire for:

All as item no-169 here in before but one ceiling / Exhaust fan point controlled by one switch

All as item no-169 here in before but one Light controlled by two-way switch .

All as item no-169 here in before but one 3 pin 5 Amps socket outlet on independent board

All as item no-169 here in before but one 3 pin 5 Amps socket outlet on same board

All as item no-169 here in before but one but with 4 Sqmm wire for 15 Amp socket outlet on independent board.

Taking down unserviceable sub main wiring of any size complete and making good disturbed surface with match colour of walls/floors etc complete as specified.

M & L submain wiring with two single core through PVC insulated unsheathed stranded copper conductor 4 sqmm (nominal area) drawing through PVC coundit consil and 4 sqmm stranded copper conductor cable PVC insulated and unsheathed (green colour) 1100 volts grade for earth continuity conductor and connecting with main earth dolly (Note : Cutting chases for counduit and sinking"s for boxes and makeing good to walls ,floors etc for sub main wiring will be measured & paid separately in respective items).

All as per item no 176 herein before but of size 2X2.5 sq mm and 1X2.5 sqmm

DR J S CHADHA AND SONS (BID ID -3153932)

DINESH CONSTRUTION (BID ID -3151101)

H S TAKHI (BID ID -3153518)

RAMESH PATIL (BID ID -3154189)

Star Construction (BID ID -3154176)

KARPE AND SONS CONSTRUCTION (BID ID -3153536)