Repair and Maint of unserviceable dispersal light, tarmac light, flood light and other allied works etc at 19 Wing and 14 BRD area under GE (AF) Borjhar.

Amount

Excavating in trenches manually not exceeding 1.5m wide and not exceeding1.5 mtr in depth/ width for laying under ground cable / foundations and getting out in soft / loose soil all as specified and directed. Note: During excavation no mechanical excavator is permitted at site, contractor will do the excavation through maually.

Returning, filling in incl spreading, leveling, watering and well ramming in layers not exceeding 25cm all as specified and directed.

Removing of surplus excavating material not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point all as specified and directed.

M&L for sand cushioning for protection of LT under ground cable with screen wash sand and punning to proper reqd cover all as specified and directed.

M & L brick protection with old size sub class ‘B’ brick for PVC under ground cable protection in trench with width equal to length of brick laid dry and flat joining each other for protection of LT under ground cable all as specified and directed.

M&L for re-laying heavy duty LT under ground cable of any sizes and types in pipe /trench /cable duct /fixed on wall by proper size shaped GI clamps with nut bolts etc and making good the disturbed surfaces by cement mortar/paint to match with the existing surface complete all as specified & directed.

M&L for taking out/removing old US cable of any sizefrom trench Note: Excavation shall measured under relavant items complete all as specified & directed.

M&L heavy duty round/flat wire armoured LT under ground cable 35 Sqmm, 3.5Core, 1100 V grade XLPE insulated , ,multi stranded aluminium conductor cable conforms to IS 7098/(Part-I) 1988 with latest ammendments in pipe /trench /cable duct /fixed on wall by proper size shaped GI clamps with nut bolts etc and making good the disturbed surfaces by cement mortar/paint to match with the existing surfaces,and aluminium terminal in cable end complete all as specified & directed.

M&L heavy duty round wire armoured LT under ground cable 25Sqmm, 3.5Core, 1100 V grade XLPE insulated, multi stranded aluminium conductor cable conforms to IS 7098/(Part-I) 1988 with latest ammendments in pipe /trench /cable duct /fixed on wall by proper size shaped GI clamps with nut bolts etc and making good the disturbed surfaces by cement mortar/paint to match with the existing incl, and aluminium terminal in cable end complete all as specified & directed.

M&L heavy duty round wire armoured LT under ground cable 16 Sqmm, 4.0 Core, 1100 V grade XLPE insulated , ,multi stranded aluminium condutor cable conforms to IS 7098/(Part-I) 1988 with latest ammendments in pipe /trench /cable duct /fixed on wall by proper size shaped GI clamps with nut bolts etc and making good the disturbed surfaces by cement mortar/paint to match with the existing surfaces and aluminium terminal in cable end complete all as specified & directed.

M&L heavy duty round wire armoured LT under ground cable 10Sqmm, 4.0Core, 1100 V grade XLPE insulated , multi stranded aluminium cable conforms to IS 7098/(Part-I) 1988 with latest ammendments in pipe /trench /cable duct /fixed on wall by proper size shaped GI clamps with nut bolts etc and making good the disturbed surfaces by cement mortar/paint to match with the existing surfaces, and aluminium terminal in cable end complete all as specified & directed.

M&L heavy duty round wire armoured LT under ground cable 10Sqmm, 2.0Core, 1100 V grade XLPE insulated, multi stranded aluminium conducto cable conforms to IS 7098/(Part-I) 1988 with latest ammendments in pipe /trench /cable duct /fixed on wall by proper size shaped GI clamps with nut bolts etc and making good the disturbed surfaces by cement mortar/paint to match with the existing surfaces, and aluminium terminal in cable end complete all as specified & directed.

M&L for boring under roads or any other specified location by reqd T&P without disturbing the top surface of the road for insertion of GI Pipe etc complete all as specified and directed.

M&L for tubes 50 mm bore light grade galvanized iron with all fittings laid in trenches/ wall/ pole through MS flat (25X3 mm), nut, bolt & washers [ where ever reqd ] of proper sizes for protection cables complete all as specified and directed.

M&L for fixing the cable junction boxes of size 255 x 355 x 122 mm, with PVC connector 4 way heavy duty for 50sq mm, 3.5 C, 1100V cable, IP 65/66, protection weather proof, outdoor installation type with threaded cable glands & pole mounting brackets etc incl taking out/removing old US cable junction box complete all as specified & directed.

M&L for fixing the cable junction boxes of size 225 x 295 x 122 mm, with PVC connector 4 way heavy duty for 35sq mm, 3.5 C, 1100V cable, IP 65/66, protection weather proof, outdoor installation type with threaded cable glands & pole mounting brackets etc incl taking out/removing old US cable junction box complete all as specified & directed.

M&L for fixing the cable junction boxes of size 205 x 255 x 112 mm, with PVC connector 4 way heavy duty for 10 - 25 sq mm, 4.0 /3.5 C, 1100V cable, IP 65/66, protection weather proof, outdoor installation type with threaded cable glands & pole mounting brackets etc incl taking out/removing old US cable junction box complete, all as specified & directed.

M&L for installation of high efficiency 100 W, 230 V flameproof LED floodlight luminaire with aluminium diecast housing and high grade diffuser, IP 65 in aluminium pressure die-cast housing for better heat dissipation with efficacy 100 Lumen/ Watt, CCT 5700K, CRI >70, power factor > 0.95, LED module incl taking down old unsv one complete all as specified and directed. Crompton FFL1315-100-CDL/60-HB-M/Orient LFFLP-100-C-H / Havells / Philips Note: i) Any fastener bolt, steel clamp, nut & bolt reqd for installation of luminaires on the ceiling, steel structure, PCC Foundation etc are deemed to be included in the rate quoted ii) Flame proof connection pipe for connection between junction box to luminaires is deemed to be included in this rate quoted.

M&L for installation of high efficiency 120 W LED Highbay luminaires, IP 66 in aluminium pressure die-cast housing for better heat dissipation with efficacy 120 Lumen/ Watt, CCT 5700K, CRI >70, power factor > 0.95, LED module with SMD LED package; mounted with PC lens to ensure better uniformity of light distribution with surge protector 10 KV incl taking down old unsv one complete all as specified and directed. Crompton LNB-11-120-CDL/60HPM, Orient LHPNP-120-C/ Havells SAUCER GENXPROHBP120W LED 757P60DBOLTG/ Philips BY415P LED145S CW HE NB FG PSU GR XTFCL S5 120W LED/ Jaquar LHBLDUL120XC Note: i) Any fastener bolt, steel clamp, nut & bolt reqd for installation of luminaires on the ceiling, steel structure, PCC Foundation etc are deemed to be included in the rate quoted ii) Any connector reqd for connection of wiring cable to fittings are deemed to be included in the rate quoted.

M&L for installation of high efficiency 150 W LED Highbay luminaires, IP 66 in aluminium pressure die-cast housing for better heat dissipation with efficacy 150 Lumen/ Watt, CCT 5700K, CRI >70, power factor > 0.95, LED module with SMD LED package; mounted with PC lens to ensure better uniformity of light distribution with surge protector 10 KV incl taking down old unsv one complete all as specified and directed. Crompton CIP-325-150-57-60D-HL-5-LM-NSG, Orient LHPNP-150-C/ Havells SAUCER GENXPROHBP150 W LED 757P60DBOLTG/ Philips BY415P LED145S CW HE NB FG PSU GR XTFCL S5 150W LED/ Jaquar LHBLDUL150XC Note: i) Any fastener bolt, steel clamp, nut & bolt reqd for installation of luminaires on the ceiling, steel structure, PCC Foundation etc are deemed to be included in the rate quoted ii) Any connector reqd for connection of wiring cable to fittings are deemed to be included in the rate quoted.

M&L for installation of high efficiency 300 W LED floodlight luminaires, IP 66 in aluminium pressure die-cast housing for better heat dissipation with high lumen efficacy, CCT 5700K, CRI >70, power factor > 0.95, LED module with SMD LED package; mounted with PC lens to ensure better uniformity of light distribution with 4 KV internal and 10 KV external surge protection incl taking down old unsv one complete all as specified and directed. CFS-501-300-57-30HD-HL2-GL-NGG/Orient LFDT-350-C/ Havells JETAVALOURFL350W3MLED757MODNBLTG/ Philips BVP485 LED370 CW AWB PSU SPD GR/ Jaquar LFLD02S350XC Note : i) Any fastener bolt, steel clamp, nut & bolt reqd for installation of luminaires on the ceiling, steel structure, PCC Foundation etc are deemed to be included in the rate quoted ii) Any connector reqd for connection of wiring cable to fittings are deemed to be included in thie rate quoted.

M&L for installation of high efficiency 200 W LED floodlight luminaires, IP 66 in aluminium pressure die-cast housing for better heat dissipation with high lumen efficacy, CCT 5700K, CRI >70, power factor > 0.95, LED module with SMD LED package, mounted with PC lens to ensure better uniformity of light distribution with 4 KV internal and 10 KV external surge protection incl taking down old unsv one complete all as specified and directed. Crompton LFLN-200-CDL/60-M/Orient LFAP-250-C/Havells JETAVALOURFL240WLED757MODNBLTG/Philips BVP410 LED 260 CW HE AK55 FG S4 XTFCL/ Jaquar LFLDSLM240XC Note : i) Any fastener bolt, steel clamp, nut & bolt reqd for installation of luminaires on the ceiling, steel structure, PCC Foundation etc are deemed to be included in the rate quoted ii) Any connector reqd for connection of wiring cable to fittings are deemed to be included in the rate quoted

Supply and fixing LED bollard light 11W, 230V, IP65 optically designed reflector for landscape lighting for downward direction with high power LED as light source and all accessories internally pre-wired, including pcc and foundation of minimum size 30x30x60cm Type B0 1:2:4 (12.5mm graded aggregate) by stainless steel nut, bolt & washers etc. including necessary electrical connections by three core sheathed aluminium/ copper conductor cable of suitable sizes through halogen free weather proof IP-65 cable junction box with treminals [Make-Hensel/ Mennekes/ OBO] incl connection by proper sizes copper/ aluminium lugs complete all as specified and directed. Make- Crompton cat part no- LBLSN-10-WW/Philips/ Havells/ Orient/ Wipro (Type-LB13-131-XXX-65-08) Note: i) Cable Junction Box will be measured and paid separately ii) Any fastener bolt, steel clamp, nut & bolt reqd for installation of luminaires on the ceiling, steel structure, PCC Foundation etc are deemed to be included in the rate quoted iii) Any connector reqd for connection of wiring cable to fittings are deemed to be included in the rate quoted.

Supply, installation, testing & commissioning LED aviation light 10W, 240V, IP65 with die-cast aluminum housing with red polycarbonate dome for better illumination, short circuit & surge protection and all accessories internally pre-wired on the high mast or other indicated location including necessary electrical connections by copper conductor cable of suitable sizes complete all as specified and directed. Make- Philips/ Havells/ Orient/ Bajaj (Type-BGAV 302 LED) Note:- Any fastener bolt, steel clamp, stainless steel nut, bolt & washer reqd for installation of luminaires on the ceiling, steel structure, PCC Foundation etc are deemed to be included in this rate Note: i) Any fastener bolt, steel clamp, nut & bolt reqd for installation of luminaires on the ceiling, steel structure, PCC Foundation etc are deemed to be included in the rate quoted ii) Any connector reqd for connection of wiring cable to fittings are deemed to be included in the rate quoted.

S&F LED Flame proof tube light fitting 20 W connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete with efficacy 120 lumen/ watt, complete incl taking down old unsv LED Flameproof tube light complete all as specified and directed.

M&L for sub main wiring with two run of single core PVC insulated unsheathed multi stranded copper conductor cable FRLS of size 4.0 Sqmm 1100 volts grade and one run of PVC insulated unsheathed multistranded copper conductor cable of size 4.0 Sqmm 1100 volts grade as earth continuity conductor drawn through in and including steel conduit of suitable size complete incl. all finishing accessories on roof /wall /ceiling/ angle/ channel etc complete and making good of wall/floor/ steel structure with cement plaster in cement mortar(1:6) or distempering or enamel painting to match the existing surface complete incl taking down old one all as specified and directed by Engr-in-charge. Note: i) No PVC flexible conduit should be allowed in the wiring. ii) Size of steel conduit shall be as per existing dia of conduit iii) Any steel clamp, flat, screw, saddle reqd for anchoring steel conduit on the steel structure is deemed to be included in this rate.

Taking down old unserviceable Empty Box / Bus Bar Chamber / DB’s of any capacity with MCCB's or MCB fixed on wall and making good disturbed surfaces of wall / floor with cement plaster in cement mortar (1:6) and distempering / white washing to match the existing surface complete all as specified & directed.

S&F sheet metal enclosure for DB’s TPN Double Door 8 way, AC, 415 volt, IP 43, 200 Amp rated bus bar fixing on the wall with, 4 Pole of breaking capacity 36kA as incomer by masonry works/ cement plaster in cement mortar (1:6) & making good the disturbed surfaces and distempering / white washing to match the existing surface incl connection of cable, testing checking etc complete all as specified & directed. Note: MCCB and MCB will be measured and paid separately.

S&F sheet metal enclosure for DB’s SPN Double Door 8 way, AC, 240 volt, IP 43 on the wall complete by masonry works/ cement plaster in cement mortar(1:6) & making good the disturbed surfaces and distempering /white washing to match the existing surface complete all as specified & directed.

M&L for passing existing cable through new stainless steel flexible conduit (minimum 25 mm and maximum 40 mm) during connection of wiring cable to DB's or luminaires or any other location complete all as specified and directed.

S&F MCB SP 6 to 32 Amps, 240 Volts 50 HZ, 10 KA breaking capacity incl connection to existing cable, testing & checking complete all as specified & directed. Type ‘C’ Characteristic

S&F MCB SPN 40 Amps 240 Volts, 50 Hz, 10 KA breaking capacity complete all as specified & directed.Type ‘C’ Characteristic

S&F MCB, TPN, 63 Amps, 415 Volts 50 HZ, 36 KA breaking capacity connection of cable testing, checking etc complete all as specified & directed. Type ‘C’ Characteristic

M&L for HDPE Double wall corrugated pipe of size 63/50 mm as per IS: 16098 Part-II-2013 and ISO 21138 & BSEN 13476-1TO 3 laid in trenches/wall for protection cables complete all as specified and directed.

S&F Double wall corrugated pipe coupler for pipe size 63/50 mm complete all as specified and directed.

Atish Builders LLP

Ms N D Enterpise

M/S PRASANTA MAHANTA

Anupam Das

M/s Nice Traders

S and B Electricals

M/s J H Associates

M/S. SUBHAS CONSTRUCTION CO.

M/s Dhruv Enterprises