Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.5 LAccepted-AOC | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹20.8 L+₹2,622 (0.13%)Rejected-Finance | L2 | Rejected-Finance Being Not Lowest | |
| 3 | L3₹22.5 L+₹1.7 L (8.25%)Rejected-Finance | L3 | Rejected-Finance Being Not Lowest | |
| 4 | L4₹23.5 L+₹2.7 L (12.9%)Rejected-Finance | L4 | Rejected-Finance Being Not Lowest | |
| 5 | L5₹23.9 L+₹3.1 L (14.8%)Rejected-Finance | L5 | Rejected-Finance Being Not Lowest |
Tender Value
Refer Docs
EMD Value
₹60,000
Closing Date
6 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE MCEME SECUNDERABAD
GE MCEME Secunderabad MCEME Campus, Trimulgherry (Post) Secunderabad - 500 015
COMPREHENSIVE REPAIR OF CERTAIN B/R WORKS TO OR/JCOs MD ACCN AND OTM ACCN OF HQ COY,OML,NML AND MILKA SINGH COLONY IN ZONE -II AREA UNDER GE MCEME SECUNDERABAD
2022_MES_550302_1
GE/MCEME/TOK/40 OF 22-23
Open Tender
Civil Works
Item Rate
180 days
GE MCEME SECUNDERABAD
Class E Category a(I)
9 documents required · 9 mandatory
₹500
GE MCEME SECUNDERABAD
₹60,000
Yes
21 Oct 2022
6 Sept 2022
8 Oct 2022
6 Sept 2022
6 Oct 2022
23 Sept 2022
Amount
M&L for coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile n.exc 0.09 sqm, in floors etc set and jointed in neat cement slurry in floors and pointed with coloured cement to match the colour of tiles including dismantling of old tiles complete all as specified and as directed by Engineer -in-Charge.
M&L for light shade Virified Ceramic tiles (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete and including dismantling of old tiles complete all as specified and as directed by Engineer -in-Charge.
M&L for coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile n.exc 0.18 sqm, in floors etc set and jointed in neat cement slurry in floors and pointed with coloured cement to match the colour of tiles and including dismantling of old tiles complete all as specified and as directed by Engineer -in-Charge.
M&L for coloured glazed ceramic tiles 450 X 300 X 7mm thick as in dado/skirting set and jointed in neat cement slurry and pointed with coloured cement to match the colour of tiles including dismantling of old tiles complete all as specified and as directed.
M&L glazed ceramic tiles in dado surfaces 300mmx200mmx7mm thick set and joint in neat cement slurry and pointed in white or colour cement to match including dismantling of old tiles complete all as specified and as directed by Engineer -in-Charge.
M&L for 20 mm thick screed bed or bedding layer of mortar in cement mortar 1:6 for lying floor finishes complete all as specified and as directed by Engineer -in-Charge.
M&L for rendering 10mm thick in cement mortar 1:3 finished rough to receive wall tiles etc. complete all as specified and as directed by Engineer -in-Charge.
S&F in repair 300mm long MS ordinary rat tail rod pattern springs including roller and roller plate fixing to door frame with welding or any means complete all as specifid and directed by Engineer in charge.
Taking down chowkhats of frames with shutter without taking taking off shutters from the frames not exc. 1.5 sqm complete all as specified and as directed by Engineer -in-Charge.
Taking down chowkhats of frames with shutter without taking taking off shutters from the frames n. exc 1.5 sqm but not exc. 04 sqm complete all as specified and as directed by Engineer -in-Charge.
M&L for Solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube suppling and fixing in opening as per specification and drawing complete all as specified and as directed by Engineer -in-Charge.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing in SSR complete all as specified and directed by Engr-in-Charge.
M & L 2nd class Hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the soild, rounded on chamfered put together with glue pinned at joints complete all as specified and as directed by Engineer -in-Charge.
S&F 125x60mm pressed steel frames for door with one or more rebates including necessary fixing lugs,hinges ,lock ,strike plate etc complete all as specified and as directed by Engineer -in-Charge.
Taking down Shutters and Resecuring or easing & adjusting, and fixing in the same opening of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and as directed by Engineer -in-Charge.
S&F 2nd class hard wood 35 mm thick, plain, framed, panelled shutter ( any number of panels) with panels of timber flat on both sides ( feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, the sizes of members of shutters shall be specified and as directed by Engineer-in-Charge
S&F 30mm thick IInd class hard wood Glazed and skeleton shutters, for windows and ventilators and door open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamferesd or rounded, fitted with cut and mitred beads for securing glass etc., size of members of shutter as specified in SSR Part-I, Sec-8, Clause 8.24 a and fixed to chowkhats complete all as specified and directed.
S&F butt hinges medium weight, cold rolled aluminium 100mm long complete all as specified and as directed by Engineer -in-Charge.
S&F 150mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed by Engineer -in-Charge.
S&F 200mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed by Engineer -in-Charge.
S&F aluminium handles 150mm long fabricated type anodised complete all as specified and as directed by Engineer -in-Charge.
S&F in repairs 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fix clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed by Engineer -in-Charge.
M&L for preparation of new wooden surfaces and applying two coats of synthetic enamel paints over a coat of pink primer complete all as specified and directed.
M&L for brickwork with FLY ASH old size bricks straight or curved on plan exc. 6m mean radius built in CM 1:6 complete and including demolition of old brick work complete all as specified and directed by Engineer in charge.
M&L for rendering 15 mm thick in concrete surfaces of walls set in CM 1:6 finished even and smooth without using extra cement including two coats of Oil Bound Dstemper over a coat of primer for newly plastered surfaces and taking down of cement plaster or cement lime plaster complete all as specified and directed by Engineer In Charge .
M&L for rendering 15 mm thick on fair faces of brick work in CM 1:4 finished even and smooth with using water proofing compound @3% without using extra cement complete all as directed. (Note : WPC will be measured separately) ( ht up to 12 m) including preparation of newely plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed by Engineer In Charge.
M&L for rendering 15 mm thick on fair faces of brick work in CM 1:4 finished even and smooth with using water proofing compound @3% without using extra cement complete all as directed. (Note : WPC will be measured separately) ( ht up to 12 m ) including preparation of newely plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer including taking down cement plaster or cement lime plaster complete all as specified and directed by Engineer In Charge.
M&L for Preparation of old decorated surfaces of walls and cornices, spoiled by smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by scraping and applying Two coats of oil emulsion distemper (OBD) complete all as specified and as directed by Engineer -in-Charge.
M&L for complete removal of existing treatment using washing and rubbing down etc of walls and cornices, spoiled by smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by scraping and applying two coats of cement base paint complete all as specified and as directed by Engineer -in-Charge. ( Ht of Bldg up to four stories )
Supplying only Integral waterproofing compound complete all as specified and as directed by Engineer -in-Charge.
M&L for as in repairs powder coated GI snap grid frame work (size of grid 605x605mm) with 35x25x1mm main tee and 25x25x1mm, cross tee and wall angle for false ceiling and suspended with 4mm dia GI wire, hooked to roof with needful adjustement up to 1200mm long by means of ceiling cleats made out of GI Flat and expansion holdfasteners 12.5mm dia 40mm long including Dismantling of old ceiling boards of any description and any thickness, fixed in any position including cover fillets if anycomplete all as per manufacturers instructions complete all as specified and as directed by Engineer -in-Charge.
S&F in repairs PVC laminated designed (both faces) gypsum board 600 X 600 X 6mm thick decorative type fixed in aluminium frame work with screws or nails etc complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs10 litre capacity, low level PVC flushing cistern, syphonic action type white colour with in let ball valve float and handle, PVC flush pipe, brackets etc complete all as specified and as directed by Engr-in-charge
S&F in repairs Bib tap, cast copper alloy, 15mm dia long body with crutch or butterfly handle screwed down for iron pipes complete all as specified and as directed by Engineer-in-Charge.
S&F in repair vitreous china EWC white including flush pipe, seat cover etc, including connection to drain (or out going pipe) and to flushing pipe anti syphonage pipes etc complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs 15mm bore Fancy type pillar taps, long shank (swan neck), Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and as directed by Engineer -in-Charge.
S&F in repairs Fancy type chromium plated 15mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed by Engineer -in-Charge.
S&F in repair 15mm bore CP Pillar tap cast copper alloy, screwed down, high pressure, with quarter round handle, with or without lettered hot or cold with long screwed shanks and fly nuts screwed complete all as specified and as directed by Engineer-in-Charge
S&F 20mm dia for high density polythelyne pipes (CPVC) of pressure rating 06 kgf/cm2 fixed complete to concealed wall or in floors etc including taking down old steel tubing and connection etc complete all as specified and as directed by Engineer -in-Charge.
S&F in repair Vitreous China Urinal, Half stall type, white all as specified including flushing pipe and waste pipe complete all as specified and as directed by Engineer -in-Charge.
S&F in chromium plated 15mm, stop valves/ angle cock (Push type), cast copper alloy with crutch or butterfly handle, screwed down, high pressure, screwed both ends for iron pipe for urinals complete all as specified and as directed by Engineer -in-Charge.
S&F for chromium plated urinal spindle spreader 15mm fix to urinal complete all as specified and directed by engineer in charge.
S&F in repair PVC waste pipe, 40mm dia for sink/urinal etc, complete all as specified and as directed by Engr-in-Charge.
S&F in repairs stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or stainless wire staples etc. fixing to wooden or steel windows or doors including fittings etc complete all as specified and as directed by Engineer-in-charge.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads (ht up to 15 m)
S&F plain sheet glass ordinary quality and glazing with oil putty /wdn beads in square n.exc.0.50sqm in each pane 3 mm thick plain glass on new or old windows incl hacking out old complete all as specified and directed by Engineer-in-Charge. ( Ht of the bldg up to 12m)
S&F steel windows with side hung shutters including projecting type hinges with steel handles and steel peg stay complete with glazing bars dovetailed or welded and ht up to 12.0 m all as specified and directed by Engineer in charge. ( Ht of the bldg up to 12m)
Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engineer -in-Charge.
M & L 75 mm thick PCC type B-1, 1:2:4 (20mm graded stone aggregate) hard standing finished with spike rolling to to surface or making impressions of expanded metal complete all as specified and directed by Engineer In Charge
S & F 1000 ltr capacity of rotational moulded PVC water storage tank three layered (cylindrical vertical with closed top) hoisted and fixed in position including all fittings like float valve etc complete including Dismantling of old 1000 ltr water storage tanks all as specified and directed.
S & F 500 ltr capacity of rotational moulded PVC water storage tank three layered (cylindrical vertical with closed top) hoisted and fixed in position including all fittings like float valve etc complete including Dismantling of old 500 ltr water storage tanks all as specified and directed.
S&F in repairs gun metal globe or gate valve, 20mm dia, screwed down high pressure with iron wheel head, screwed both ends for iron pipes or for union complete all as specified and as directed by Engr-in-Charge
S & F mild steel articles such as hold fasts conforming to IS-2062 and grade E-165 (Fe-290), including riveting/or welding and fixing with screws, bolts, etc. complete all as specified and as directed by Engineer-in-charge.
M&L for preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer -in-Charge.
M & L chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick, set jointed and pointed in neat cement slurry with grey cement and pigments complete all as specified and as directed by Engineer -in-Charge.
dhvani infra
NEWS CONSTRUCTIONS
VACON INFRASTRUCTURES
M/S M.N.Reddy
K LAKSHMAN SINGH AND CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .