Construction of Girls Hostel Building at GDC Bhaderwah Contract No 16

Amount

Providing & laying in postion cement concrete of specified grade excluding the cost of centring and shuttring in 1:5:10 mix using brick bats

12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand)

15mm Cement plaster on the rough side of single or half brick wall of mix. 1 : 6 ( 1 cement : 6 fine sand)

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 6 fine sand)

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc complete On concrete work)

Providing and fixing lSI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial ply veneering with .~ vertical grains or cross bands and face veneers on both faces of shutter 35 mm thick including lSI marked M.S. pressed bright finished butt hinges with necessary screws of required size

Providing and fixing of 0.8mm -10mm Mica on flush door bolt side including necessary nails, masking tapes, favicol labours etc complete job

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately all complete as per direction of engineer in charge(35mm ) First Class deodar wood

Providing and fixing 35 mm thick wire gauze shutters using galvanised M.S. wire gauze of average width for aperture 1.4 mm in both directoin with wire of dia. 0.63 mm for doors, windows and clerestory windows with hinges and necessary screwsSecond class deodar wood.

Providing and fixing gang saw cut mirror polished (pre mounded and pre polished), machine cut for kitchen platform, vanity counters window sills facias and similar locations of required size of approved shade, color and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels granite work 18mm thick

Extra for providing edge moulding to 18 mm thick marble stone counters, Vanities etc. over item no. 8.2 including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite Work

Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5mm of approved makelikeNITCO,ORIENT,SOMANY KAJARIA, or equivalent make in all colour, shades except burgundy, bottle green, black of any size as approved by Eningeer in-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITC.O, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coa.rse sand) including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing of glass panes 5.5mm thick to windows and windows shutters

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed, consolidated and grouted with fine sand including finishing the top smooth

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc.including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete,i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such Killogram 573.50 as nuts, bolts, fasteners etc

Providing and fixing of crome coated hardware fittings for doors/windows shurtters and other fittings

a) Aral drop 1’-0”

b) Aral drop 8”

c) Aral drop 6”

d) Handle 8”

e) Handle 6”

f) Tower bold 6”

g) Tower bolt 8”

h) Door stopper (front and back)

i) EYE AND HOOKS

j) Door closer

Earth work in excavation by manual means over areas (Exceeding 30 em and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. on plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed in : All kinds of Soil

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:4:8 (1 cement: 4 fine sand : 8 graded stone aggregate 40mm nominal size)

Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in foundation and plinth in Cement mortar 1 :6 ( 1 cement : 6 coarse sand)

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 stoneaggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design : In 75x75 mm deep chase

Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand . : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete 50 mmthick with 20mm nominal size stone aggregate. (a) Crushed

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth leve 1:1.5:3 (1 Cement: 1.5 Coarse sand: 3 graded stone aggregate 20mm nominal size) crushed stone

Honey-comb brick work 10/11.4 em thick with bricks of class designation 75 in cement mortar 1:4 (1 cement: 4 coarse sand)

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size

Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand . : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete 50 mmthick with 20mm nominal size stone aggregate. (a) Crushed

Centring and shuttering including strutting, propping etc. and removal of form for

Foundations footings. bases of columns

Suspended floors, roofs, landings, balconies and access platform.

Edges of slabs and breaks in floors and walls. Under 20cms wide

Supplying and filling of brick bats

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work above plinth level upto v floor level 1:1.5:3 (1 Cement: 1.5 Coarse sand: 3 graded stone aggregate 20mm nominal size)

Half brick masonry with bricks of class designation 75 in foundations and plinth in Cement mortar 1 :4 ( 1 cement : 4 coarse sand) Extra for half Brick masonry in superstructure above plinth level upto floor V level

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

Strctural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc with complete fittings.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion

Bend 75mm

Bend 110mm

Water closet ( European type) with seat and lid,10 litre low level white vitreous china flushing cistern and CP flush with fittings, C. I./M.S. brackets 40mm bend diameter flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. pan with lSI marked white solid plastic seat and lid. with white vitreous china flushing cistern & C. P. flush bend. Providing and fixing white vitreous china pedestal type

Providing and fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern,including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China wash basin size 660x460 mm with a pair of 15 mm C.P. brass pillar tapswith elbow operated levers.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing Salem Stainless Steel A lSI 304 (18/ 8) kitchen sink as per I.S. 13983 with C.l. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required: 510x1040mm bowl depth 178mm

Providing and fixing mirror of superior glass( of approved quality) and of required shape and size with plastic . moulded frame of approved make and shade with 6 mm thick hard board backing

Rectangular shape 1500x450 mm

Rectangular shape 453x357 mm

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing PTMT soap dish holder having length of 138mm, breadth 1 02mm, heigth of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm nominal bore(hindware cera jaquar)

Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved make conforming to IS : 893115 mm nominal bore

Providing and fixing C.P. brass close hole basin mixer piller tap of approved quality and make, weighing not less than 1.970 kg 15 mm nominal bore of standard back type.

Providing and fixing PTMT bib cock of approved quality & colour. 15 mm nominal bore, 165 mm long, weighing not less than 110 gms

Providing and placing on terrace (at all floor levels) polyethylene the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license].water storage tank lSI : 12701 marked indicating

SUKH DEV SINGH

A L NATNOO