R/M of HPSEBL Colony at U/S Sandhasu

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.(i) 15 mm dia nominal bore metre

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.(i) 40 mm dia nominal bore metre

Providing/Laying cement concrete 1:2:4 (1 cement 2 sand:4 graded stone aggregate20mm nominal size ) and curing complete excluding cost of form work in foundation &plinth.

Providing and laying 40mm diameter black HDPE pipe including carriage up to site, fitting, strengthening, trenching and refilling etc where is necessary. complete in all respect .

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in- Charge.With cement mortar 1:4 (1cement: 4 coarse sand)

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. 9.51.1With 2nd class teak wood beading 62X19 mm

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/m²

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:Float glass panes of nominal thickness 4 mm

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth