Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.1 CrAccepted-AOC NUMALIGARH BLOCK GAON GOLAGHAT P O KANAIGHAT P S NUMALGARH DIST GOLAGHAT PIN 785699 | GOLAGHAT | ASSAM | 785699 | ₹3.1 Cr | L1 | Accepted-AOC AWARDED |
| 2 | L2₹3.2 Cr+₹14.3 L (4.65%)Rejected-AOC AT ROAD BOKAKHAT ASSAM | ₹3.2 Cr+₹14.3 L (4.65%) | L2 | Rejected-AOC REJECTED |
Tender Value
₹3.4 Cr
EMD Value
₹6.8 L
Closing Date
18 Feb 2021, 2:00 pmClosed
Chief Engineer, PWD, Roads, Assam, Chandmari, Ghy
O/o the Chief Engineer, PWD, Roads, Assam, chandmari, Guwahati-781003
SOPD_G_20_21_248 Construction of (1) From 1st Km of Agoratoli road Bholukaguri connecting road, (2) Upper Temera Goroimari gaon ali, (3) From NH-37 to Bogorijuri Gaon ali under SOPD-(G) for the year 2020-21
2021_PWD_21199_3
CE/DEV/TB/140/2020-21/1
Open Tender
Civil Works
Item Rate
270 days
Bokakhat
Please refer Tender documents.
6 documents required · 6 mandatory
₹10,000
Empowered Officer, ASRB
₹6.8 L
Yes
O/o the Chief Engineer, PWD, Roads, Assam, chandma
31 Mar 2021
12 Feb 2021
18 Feb 2021
12 Feb 2021
18 Feb 2021
15 Feb 2021
12 Feb 2021 - 18 Feb 2021
15 Feb 2021
Amount
1) Road from 1st Km of Agoratoli Road t Bholukaguri connection Road Clearing grass and removal of rubbish up to a distance of 30m outside the periphery of the area as per Tech. Specification clause 201.
Construction of embankment with approved material obtained from borrow pits with a lift up to 1.5m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300.1 and 300.2 with a lead up to 1000m as per technical specification clause 301.5 (a) Private land
Construction of Sub grade and earthen shoulders with approved material obtained from borrow pits with all lift and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300.2 with a lead up to 1000m as per technical specification clause 303.1 (a) Private land
Granular Sub-Base with Coarse Graded Material (Table: 400.1) (Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC,and compacting with vibratory roller to achieve the desired density,complete as per cl. 401 (ii) For grading-II material
Providing laying, spreading & compacting stone aggtts. of specific sizes to WBM specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10T in stages to proper grade and camber applying and brooming, requisite type of screening/-binding materials to fill up the interstices of course aggtts. watering and compacting to required density grading 3 as per tech. specification clause 405. (A) By Manual means
Providing and laying interlocking concrete block pavement having thickness 80mm as per echnical specification clause 1504. (Rates are inclushive of C.C. edge block)
RCC guard post: Supplying,fitting and fixing RCC guard post size 15 cm dia,150cmlong,75cm above the ground and 75cm below the ground, with 4-12mm Tor steel main steel and 6mm MS stirrups at 30cm c/c tied inposition with annealed black wire, cement concrete proportin 1:2:4with broken stone aggregate up to 20mm size including centering, mouldingthe top. curing,paintedblack and white alternatelyin 23cm strips upto 0.75m from the top having reflective band 2 nos.of desired shade etc. as per design and direction complete. (b) 15 cm dia with 4-12mmTor bar
ii) Trafic signs: Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on 2 inch dia GI Pipe firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approved drawing and Tehnical Specification Clause 1701.i) 60 cm equilqterql triqngle
Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 1.5 mm thick supported on GI pipe 50 mm dia firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 1701 (iv)80 cmx 60 cm rectangular
Dismantling of Structures Dismantling of existing structures like culverts, bridges, retaining walls and other structures comprising of brick masonry, including disposal of unserviceable material and stacking the serviceable material with all lift and lead of 1000 m as per Technical Specification Clause 202. (C) Reinforced Cement Concrete
Earth work in excavation for foundation of structure up to 3m depth as per drawing and technical specification Clause1140 including setting out construction of shoring and bracing , removal of stumps and other deleterious matter, dressing of sides and bottom and backing filling with approved materials . I)Ordinary Soil (i) Upto 3m.
Providing concrete for plain/reinforced concrete in open foundations complete as per drawing and technical specification Clause No. 802, 803, 1202 & 1203 A. With crushed stone II) P.C.C. Grade M 10 (i) Nominal mix
B. Type-B (First class) bedding: Laying First class bedding on well compacted approved granular materials as per clause 1105 (ii)
1st class brick work in cement mortar in foundation complete excluding pointing and plastering as per drawing and technical specification Clause No. 600, 1202 & 1203. I) Brick masonary in 1:3 cement mortar.
Providing and lying reinforcement cement concrete pipe NP-3 for culvert on 1st class bedding of granular materials in single row including fixed in collar with cement mortar 1:2.But excluding excavation protection work back filling concrete and masonry work in head wall and parapets clause 1106.(B) 1000m dia
Plastering with cement mortar 1:4, 15mm thick on brick work in sub-structure as per technical specification clause No. 613.4 & 1204
Planting of Trees and their Maintenance for three Year (Planting of trees by the road side (Avenue trees) in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge mannure, planting the saplings, backfilling the trenches, watering , fixing the tree guatrd and maintaining the plants for three year.
Dismantling of Flexible Pavements (Dismantling of flexible pavements and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately) (II) By mechanical means, (b) Granular courses.
Dismantling of Structures (Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material,disposal of unserviceable material and stacking the serviceable material with all lift and lead of 1000 metres) (I) Lime /Cement Concrete, (B) By Mechanical Mean, (b) Reinforced cement concrete grade M-20 & above
Excavation for Structures (Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. (I) Ordinary soil, B - Mechanical Means, (b) With dewatering, (ii) Depth 3 m to 6 m
PCC 1:3:6 in Foundation (Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.)
Plain/Reinforced cement concrete, in open foundation complete as per drawing and technical specification including steel shuttering formwork. (N) Without plasticiser, ( C) RCC Grade M20, Case - I Using concrete mixer
Plain/Reinforced cement concrete, in sub structure complete as per drawing and technical specification and steel shuttering formwork. (N) Without plasticiser, B - PCC Grade M20, Height upto 5m
Furnishing and Placing Reinforced/Prestressed cement concrete in super-structure as per drawing and Technical Specification' including steel shuttering formwork. (N) Without Plasticiser, A - RCC Grade M20, Case-I Using Concrete Mixer, (i) For solid slab super-structure, (a) Height upto 5m
Reinforcement : Supplying, fitting and placing TMT bar reinforcement including splicing complete as per drawing and technical specifications. (c) With other make ISI marked TMT rebar
Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications
Construction of RCC railing of M30 Grade in-situ with 20 mm nominal size aggregate, true to line and grade, tolurence of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequat space between vertical posts for expansion, complete as per approved drawings and technical specifications.
Painting on concrete surface (Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 Sq.m. ) B- For RCC Railing
Drainage Spouts complete as per drawing and Technical specification
Providing weep holes in Brick masonry/Plain/Reinforced concrete abutment, wing wall/return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical specification.
Back filling behind abutment, wing wall and return wall complete as per drawing and Technical specification. A-Granular material
Flexible Apron :Construction of flexible apron 1 m thick comprising of loose stone boulders weighing not less than 40 kg beyond curtain wall.
Curtain wall complete as per drawing and Technical specification. B- Cement concrete Grade M15
Plain/Reinforced cement concrete, in open foundation complete as per drawing and technical specification including steel shuttering formwork. (N) Without plasticiser, (B) PCC Grade M20 (in wing wall)
Boulder apron laid in wire crates (Providing and laying of boulder apron laid in wire crates made with 4mm dia GI wire conforming to IS: 280 & IS:4826 in 100mm x 100mm mesh (weaved diagonally) including 10% extra for laps and joints laid with stone boulders weighting not less than 40Kg each.)
Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification
Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications
2) Upper Temera Goroimari Gaon Ali Clearing and grubbing of road land including up rooting wild, vegetation grass, bush, shrubs saplings and tress of grith up to 300mm removal of stumps of trees cut earliar and disposal of unserviceable materials & staking of serviceable metarial to be used or auctioned, up to a lead of 1000m including removal & disposal of top organic soil not exceeding 150mm in thickness as per Tech. Specification clause 201.(1) By manual means : (A) In area of non thorny jungle
Construction of embankment with approved material obtained from borrow pits with a lift up to 1.5m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300.1 and 300.2 with a lead up to 1000m as per technical specification clause 301.5 (a) Private land
Construction of Sub grade and earthen shoulders with approved material obtained from borrow pits with all lift and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300.2 with a lead up to 1000m as per technical specification clause 303.1 (a) Private land
Granular Sub-Base with Coarse Graded Material (Table: 400.1) (Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC,and compacting with vibratory roller to achieve the desired density,complete as per cl. 401 (ii) For grading-II material
Providing laying, spreading & compacting stone aggtts. of specific sizes to WBM specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10T in stages to proper grade and camber applying and brooming, requisite type of screening/-binding materials to fill up the interstices of course aggtts. watering and compacting to required density grading 3 as per tech. specification clause 405. (A) By Manual means
Providing and laying interlocking concrete block pavement having thickness 80mm as per echnical specification clause 1504. (Rates are inclushive of C.C. edge block)
RCC guard post: Supplying,fitting and fixing RCC guard post size 15 cm dia,150cmlong,75cm above the ground and 75cm below the ground, with 4-12mm Tor steel main steel and 6mm MS stirrups at 30cm c/c tied inposition with annealed black wire, cement concrete proportin 1:2:4with broken stone aggregate up to 20mm size including centering, mouldingthe top. curing,paintedblack and white alternatelyin 23cm strips upto 0.75m from the top having reflective band 2 nos.of desired shade etc. as per design and direction complete. (b) 15 cm dia with 4-12mmTor bar
ii) Trafic signs: Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on 2 inch dia GI Pipe firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approved drawing and Tehnical Specification Clause 1701.i) 60 cm equilqterql triqngle
Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 1.5 mm thick supported on GI pipe 50 mm dia firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 1701 (iv)80 cmx 60 cm rectangular
3) Road from NH-37 to Bogorijuri Gaon Clearing grass and removal of rubbish up to a distance of 30m outside the periphery of the area as per Tech. Specification clause 201.
Construction of embankment with approved material obtained from borrow pits with a lift up to 1.5m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300.1 and 300.2 with a lead up to 1000m as per technical specification clause 301.5 (a) Private land
Construction of Sub grade and earthen shoulders with approved material obtained from borrow pits with all lift and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300.2 with a lead up to 1000m as per technical specification clause 303.1 (a) Private land
Granular Sub-Base with Coarse Graded Material (Table: 400.1) (Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC,and compacting with vibratory roller to achieve the desired density,complete as per cl. 401 (ii) For grading-II material
Providing laying, spreading & compacting stone aggtts. of specific sizes to WBM specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10T in stages to proper grade and camber applying and brooming, requisite type of screening/-binding materials to fill up the interstices of course aggtts. watering and compacting to required density grading 3 as per tech. specification clause 405. (A) By Manual means
Providing and laying interlocking concrete block pavement having thickness 80mm as per echnical specification clause 1504. (Rates are inclushive of C.C. edge block)
RCC guard post: Supplying,fitting and fixing RCC guard post size 15 cm dia,150cmlong,75cm above the ground and 75cm below the ground, with 4-12mm Tor steel main steel and 6mm MS stirrups at 30cm c/c tied inposition with annealed black wire, cement concrete proportin 1:2:4with broken stone aggregate up to 20mm size including centering, mouldingthe top. curing,paintedblack and white alternatelyin 23cm strips upto 0.75m from the top having reflective band 2 nos.of desired shade etc. as per design and direction complete. (b) 15 cm dia with 4-12mmTor bar
Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 1.5 mm thick supported on GI pipe 50 mm dia firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 1701 (iv)80 cmx 60 cm rectangular
M/S. M.P. AGARWALLA
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .