Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.8 LAccepted-AOC H NO 11A PREM NAGAR WARD NO 2 SIRSA | SIRSA | SIRSA | HARYANA | 125055 | ₹16.8 L Quoted ₹16.9 L | L1 | Accepted-AOC Allotted |
| 2 | L2₹17.5 LRejected-AOC | ₹17.5 L | L2 | Rejected-AOC Not allotted |
| 3 | L3₹17.9 LRejected-AOC C O VIJAY KUMAR R O VILLAGE TIBBI DISTRICT FATEHABAD | FATEHABAD | ₹17.9 L | L3 | Rejected-AOC Not allotted |
| 4 | L4₹19.6 LRejected-AOC | ₹19.6 L | L4 | Rejected-AOC Not allotted |
| 5 | Not Admitted-Fee/PreQual/Technical VPO KESHUPURA TEHSIL ELLENABAD DISTT SIRSA HARYANA 125055 | ELLENABAD | SIRSA | HARYANA | 125055 | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹18.8 L
EMD Value
₹19,000
Closing Date
6 Apr 2026, 5:00 pmClosed
Lalit Nanda
Executive Engineer, Hisar
Installation of 02 Nos Submersible Tubewell at Police Lines, Fatehabad.
2026_HBC_511352_1
2026EB299416 943E 4437 8EF7 938FA6E41F6057HHC
Open Tender
Civil Works
120 days
Fatehabad
2 documents required · 2 mandatory
₹1,180
₹19,000
Yes
5 May 2026
30 Mar 2026
7 Apr 2026
30 Mar 2026
6 Apr 2026
30 Mar 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1[20.10.2]Extra for fixing sluice valves/flap valves socketed or flanged including cartage from stores or nearest Railway Station to site of works 2. 100 mm i/d [Through Rate] | ||||||
| 2[20.10.3]Extra for fixing sluice valves/flap valves socketed or flanged including cartage from stores or nearest Railway Station to site of works 3. 150 mm i/d [Through Rate] | ||||||
| 3[20.11.2]Providing and fixing cast iron double flanged swing check type reflux (non return) valves PN-1.6 marked with IS:5312 including nuts and bolts marked with IS:1363, rubber sheet marked with IS:638 etc., carriage loading, unloading, stacking, handling, re-handling etc. Complete in all respect to the satisfaction of Engineer-in-charge 2. 100 mm i/d [Through Rate] | ||||||
| 4[20.114.7]Supplying erection, testing of fully automatic electric control panel board for T/Wells in Pump Chamber consisting of MS sheet of thickness 14 gauge duly painted box type floor mounted made of angle Frame containing 1 no. fully automatic air brake starter suitable for Motor of the following capacity, Min switch of suitable range with HRC fuse, 1 no. volt meter (0 to 500 volts), 1 No. Amp. Meter of 0 to 100 amp. 3 sets of indicating lamp capacitor of suitable capacity and 1 no. single phase preventers with the timer switch including wiring in panel board and suitable electric energy meter wiring in Electric Control Panel Board complete in all respect as per specification given in Schedule No. II, Including MCB, suitable, Capacitor, Wooden Box etc as per site requirement complete in all respect. 7. 40 HP Motor [Through Rate] | ||||||
| 5[20.124.63]Supplying, erection, testing and commissioning of submersible pumping sets as per BIS SPECIFICATION No. 8034-1989 (as amended upto date for pumps) and IS 9283-1979 (as amended upto date for motor) the pump motor sets should be capable of pumping clear fresh cold water having characteristics as specified in Clause-4 of IS 8034-1989 and Clause 4.1 of IS 9283-1979. 63. LPM 900 Head 120 BHP 40.00 Say Round BHP 40.00 [Rate] | ||||||
| 6[20.49.1]Bailing out water from the trenches for making new connections in fully charged pipe-lines including cleaning trimming and dressing the trenches to correct alignment and grade as required by the Engineer-in-charge. Size of the main with which connection is to be made. 1. Up to 200 mm internal diametre [Through Rate] | ||||||
| 7[20.53.2]Providing and fixing rubber sheet 3mm thick of best quality for jointing flanged pipes, specials etc. including making of holes etc. complete in all respects to the satisfaction of Engineer-in- Charge. 2. for pipe size 100 mm i/d [Through Rate] | ||||||
| 8[20.54.4]Providing GI pipes class B marked with IS: 1239 in 3.05 m length, their threading and welding with flanges (Heavy Duty) on both sides, jointing with nuts and bolts ( ‘W’ make), rubber gaskets , lowering into Tube wells and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of Engineer-in- Charge. 4. 100 mm i/d [Through Rate] | ||||||
| 9[20.58.2]Providing and fixing Cast Iron Detachable Joints class-15 marked with IS: 8794 for use with asbestos cement pressure pipes complete with 2 Nos. rubber rings marked with IS:5382 and IS:10292 and appropriate number of nut and bolts marked with IS:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (Excavation will be paid separately) 2. 100mm i/d CID Joint [Through Rate] | ||||||
| 10[20.63.1]`Providing, lowering, laying in trenches, aligning, fixing in position and jointing Ductile Iron (DI) ISI marked K-9 grade SandS pipes as per 15:8329-2000 (amended up to date), with internal cement mortar lining for potable water with rubber ring (EPDM/SBR) joints as per IS: 5382-1985 (excluding special accessories) complete including all material, labour, hydraulic testing and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/W to be measured and paid separately. ` 1. 100 mm i/d [Through Rate] | ||||||
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 7.77 MB
BOQ_590147.xls
BOQ • 0.34 MB
1K5F0DZ154396.pdf
Additional Documents • 7.64 MB
OT0154396.pdf
Other Document • 0.26 MB
Download all tender documents and submit your bid