REPAIR REPLACEMENT TO GI TUBING TILING SUNKEN FLOOR JOINERY GRIT FINISH PLASTERING AND OTHER B AND R WORKS AT CHERRING ENCLAVE MD ACCN UNDER AGE B AND R I OF GE NORTH DELHI CANTT

Amount

Dismantling of floor of size not exceeding 4.00 Sqm mtr for EWC water closet and removing out the cinder/concrete from sunken protion, , grinding any sharp edges etc all as specified and directed with following: (a) Cleaning of RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques on site conditions etc. (b) M&L for a glass fibre reinforced acrylic modified cementitious coating system with base coat of Sika Top & Seal-107 @ 1.50 Kg/Sqm glass fibre reinforcement Sika® Fab-I and top coat with Sika Top® Seal-107 @ 1.50 Kg/Sqm or equivalent of Fosroc or Pidilite. (c) M&L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound with Sika ® Plastocrete plus as specified. (d) M&L for providing 40 mm dia GI pipe spout projecting at least 150 mm beyond outer face of wall. (e) M&L for sunken portion filled with 40 mm graded brick bats and finished with 50 mm thick PCC 1:2:4 type B1 all as specified and directed. (f) The area of Each WC portion is n.exc 4.00 Sqm each. (g) Cost of the above aspect shall be deemed to be included in the quoted rates of the respective item and nothing extra shall be paid on this account. (h) 72 hrs Ponding test shall be carried out for sunken treatment before payment.

Dismantling of floor of size not exceeding 1.50 Sqm mtr for EWC water closet and removing out the cinder/concrete from sunken protion, , grinding any sharp edges etc all as specified and directed with following: (a) Cleaning of RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques on site conditions etc. (b) M&L for a glass fibre reinforced acrylic modified cementitious coating system with base coat of Sika Top & Seal-107 @ 1.50 Kg/Sqm glass fibre reinforcement Sika® Fab-I and top coat with Sika Top® Seal-107 @ 1.50 Kg/Sqm or equivalent of Fosroc or Pidilite. (c) M&L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound with Sika ® Plastocrete plus as specified. (d) M&L for providing 40 mm dia GI pipe spout projecting at least 150 mm beyond outer face of wall. (e) M&L for sunken portion filled with 40 mm graded brick bats and finished with 50 mm thick PCC 1:2:4 type B1 all as specified and directed. (f) The area of Each WC portion is n.exc 1.50 Sqm each. (g) Cost of the above aspect shall be deemed to be included in the quoted rates of the respective item and nothing extra shall be paid on this account. (h) 72 hrs Ponding test shall be carried out for sunken treatment before payment.

Supply and laying of 20mm outer dia of CPVC pipe SDR 11 and plain CPVC SDR 11 fittings on wall/ceiling or laying in floors complete including brass CPVC fittings (i.e elbow, Tee, MTA/MBTA,FTA/FBTA, Tank adaptor, Union, etc suitable for 15mm bore bath fittings including taking down GI tubing ). (Note- length of pipe with fittings to be measured for payment, no extra payment should be made for fittings).

Supply and laying of 25mm outer dia of CPVC pipe SDR 11 and plain CPVC SDR 11 fittings on wall/ceiling or laying in floors complete including brass CPVC fittings (i.e elbow, Tee, MTA/MBTA,FTA/FBTA, Tank adaptor, Union, etc). (Note- length of pipe with fittings to be measured for payment, no extra payment should be made for fittings). including taking down GI tubing.

Taking down door shutters of any description exc 1 Sqm & n.exc 2 Sqm each complete all as specified and directed

Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) all as specified and directed.

Taking down chowkhats of frames exc 1.50 sqm but n. exc 4.0 sqm with shutters (without taking off shutters from the frames) all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick joint free area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors over 15mm thick screed bed in cement mortar 1:6 set and jointed in neat cement slurry and pointed in coloured cement.including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors over 15mm thick screed bed in cement mortar 1:6 set and jointed in neat cement slurry and pointed in coloured cement. including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

M&L glazed ceramic coloured tiles in vertical surface area of each tile between 0.06 to 0.15 Sqm each, set and jointed in neat cement slurry and pointed in white or coloured cement to match incl rendering 10mm thick in CM (1:4) and finished rough, complete including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified & directed. (Note - Tiling work to be done in patches, forming hole where required over making good wall surface.

M&L 20 to 25 mm thick pre-polished machine cut Kota stone slab as in flooring over and including 15mm thick screed bed in cement mortar 1:6, laid over cement slurry @ 3 Kg/Sqm and jointed with grey cement slurry mixed with pigment to match with shade of slab including moulding the edge of slab complete all as specified and as directed.

M&L 20 to 25 mm thick pre-polished machine cut Kota stone slab as in riser or vertical surface over and including 10 mm thick rendering in cement mortar 1:4, and jointed with grey cement slurry mixed with pigment to match with shade of slab including moulding the edge where as specified and as directed.

M&L Granite 12-18 mm thick colour as approved ( of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shed of granite over 15mm thick screed bed in cement mortar 1:6), including moulding of edge of granite.all as specified and directed

M&L Granite 12-18 mm thick colour as approved ( of any type) work (table rubbed and polished) in for wall lining (veneering to wall) 10 mm thick in cement mortar (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shed of granite including moulding of edge of granite.

M & L Brickwork with subclass 'B' Brick straight or curved on plan exc 6m mean radius, built in, built in cement mortar 1:6 complete including demolition of the the brick work at any position all as specified.

Taking down existing cement plaster or grit finished or complete removal of existing pointing and finishes including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L 15 mm thick Rendering in cement mortar 1:4 on faces of brick work or concrete external surfaces of wall finished even and smooth without using extra cement all as specified and directed by Engineer-in-Charge.

M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement : 4 coarse stone dust) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) white cement in place of ordinary cement to be used in the work, panels with groove all around as per approved pattern or design and colour including scrubbing and washing the tip layer with brushes and water to expose the stone chippings complete including scaffolding up to 8 floor all as specified (Payment for providing grooves shall be made separately).

M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nails to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove including scaffolding up to 8 floor complete as per specifications and direction of the Engineer-in-Charge

M&L 15mm thick Rendering in cement mortar 1:6 on faces of brick work or concrete internal surfaces of wall finished with using luquied Water proofing compound @ 200ml/50kg of cement even and smooth without using extra cement all as specified and directed by Engineer-in-Charge.

M&L 5 mm thick rendering in cement mortar 1:3 on concrete surfaces in ceiling, finished fair & even and smooth complete.

M&L for Preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete.

M&L for Preparing old decorated plastered surfaces of ceiling and applying two coats of white wash complete.

M&L for Preparing new plastered surfaces of wall and applying two coats of oil bound distemper white or tinted over and including a coat of 2mm wall care putty on plastered surfaces preparatory to distempering complete.

M&L for existing treatment complete removal from wall and preparing old decorated surfaces of wall and applying two coats of Oil Bound Distemper over a coat of 1mm wall care putty.

M&L for preparation of new plastered surfaces of wall and applying two coat of cement based paint over a coat of cement primer all as sepcified and directed

M&L for complete removal of existing treatment of wall including cornices etc. by washing, rubbing down and stopping holes, and applying two coats of cement base paint over one coat of primer of approved shade complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not other wise provided all as specified and directed

S & F for steel gate made of MS section, grill work including holdfast, 2x MS hinges, stoppers, bushes, and all as CI decorative pieces, locking arrangement etc complete all as specified and directed.

S&F Steel water tubes, medium grade, ISI marked, galvanised, 15 mm bore with all fittings, fixed to walls and ceiling or laid in floors including taking up or down steel tubing and connections complete.

S&F Steel water tubes, medium grade, ISI marked, galvanised, 20 mm bore with all fittings, fixed to walls and ceiling or laid in floors including taking up or down steel tubing and connections complete.

Refixing only old 15 mm dia bore steel water tubing & connection in new or old position fixed to wall, ceiling or laid in floors including necessary cutting & making of new threads for fixing of new fittings such as elbows, tees, sockets, union, , reducer, etc as required including taking up or down steel tubing and connections complete. .

Refixing only old 20 mm dia bore steel water tubing & connection in new or old position fixed to wall, ceiling or laid in floors including necessary cutting & making of new threads for fixing of new fittings such as elbows, tees, sockets, union, , reducer, etc as required including taking up or down steel tubing and connections complete.

S&F Rotational moulded polyethylene water storage tanks (cylindrical/rectengular transparant type with closed top) of 200 litres capacity, ISI marked, double layered hoisted and fixed in position including connecting up pipes with fittings including dismantling of existing water tanks complete.

S & F in repair 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete.

S & F of float valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic wall, screwed for iron pipe and fixed for 20 mm bore size (Minimum weight 210gms), complete.

Cutting chases in brick walls, pinning in, making good any thickness up to wall tile to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubings or conduit wiring, etc and making good, cutting exceeding 20cm girth complete.

S & F in repair Brass CP mixer for mixing hot & cold water screwed down high pressure, with long screwed shanks and fly nuts, screwed for pipe 15 mm bore with nozel pipes and all fittings complete.

S & F in repairs wall mixer with provn for over head showers with 115 mm long bend pipe on upper side connecting legs and wall flanges. Make Jaguar/Cera/Parryware all as specified and directed.

S & F in repairs sink wall mixer for sink including legs and wall flanges and all necessary fittings make it functional all as specified and directed. Make Jaguqr/Cera/Parryware.

Repair including labour to all broken/damage plumbing items in shaft/duct up to 9 story bldg with using safety belt or jhula work included, repair to PVC pipe including PVC fittings, fixing of MS clamp/bricket, RCC Jali, MS ring/foot rest etc consumable items to be paid separately

Supply only PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or in floor 75mm bore PVC/ drain/Rain water pipe complete.

Supply only PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110 mm bore PVC/ drain/Rain water pipe complete.

Supply only PVC (SWR) bends any radius, 75 mm bore, complete.

Supply only PVC (SWR) bends with access door any radius, 75 mm bore, complete.

Supply only PVC (SWR) bends any radius, 110 mm bore, complete.

Supply only PVC (SWR) bends with access door any radius, 110 mm bore, complete.

S & F in repair Stainless steel plate rack (utensil rack) of size (600 mm x 750 mm) and depth 300 mm made with 0.55 mm thick stainless steel sheet provided with brass screw including necessary fittings, nut/bolts complete.

S & F in repair Soap dish disc (oval) type, mild steel chromium plated of approximate size 100 x 50 x 10 mm, complete.

S & F in repair sheet Glass shelf assembly consisting of 5.5 mm thick sheet glass self 12 cm wide with chromium plated bracket guard and railing 60 cm long.

S&F in repair 75 mm PVC (SWR) floor trap, plain with grating doom including jointing with solvent cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate mix with WPC complete all as specified and as directed.

S & F in repair stainless steel sink with drainage board, made out of 1.00 mm thick sheet with plug, washers, waste pipe, cast iron cantilever brackets, connecting union over all size 915 mm X 460 mm with bowl size 410 mm x 330mm x 160 mm complete.

S & F in repair Tubular towel rail of brass chromium plated, 20 mm dia, 'D' type, 60 cm long between flanges complete.

S & F in repair Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions 15 mm bore complete.

S & F in repair Bib taps cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15 mm bore complete.

S & F 32 mm dia bore Low density polyethylene pipes (LDPE)of pressure rating 6kgf/cm2 fixed complete to walls,ceilings or in floors etc for WHB and sink complete.

S & F in repair Brass chromium plated shower rose 65 to 90 mm size with swivel joints, wall flange complete.

S&F in repair 10 litre capacity PVC low level flushing cistern ‘ white’ with inlet, float valve including bracket with 32mm dia PVC waste/flush bend pipe appx 600 mm long complete.

S & F in repair PVC connection 600mm long and15 mm dia with brass fly nut at both ends complete.

S&F in repair Chromium plated brass angle valve concelled type for 15mm bore pipe, fixed in repairs complete all as specified and directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

S&F in repair CP Crome Jet for 15 mm dia with pipe crome plated 1.25 Mtr long flexible tube and complete all as specified and directed.

S&F Fibre glass reinforced plastic (FRP) door frames shall be three lagged of cross section 90mmx45mm having single rebae of 32mmx15mm to receive shutter of 30mm thickness. The laminate door frame moulded with fire retardant grade unsaturated polyester resin and chopped mat. Door frame moulded with fire retardant grade unsaturated polyester resin and chopped mat Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs, The frame shall be covered with fiber glass from all sides MS Stay shall be provided at the bottom to seady the frame all as specified and directed.

S&F FRP door shutter shall be 30mm thick glass fibre reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufactures. Made with fire retardant agrade unsaturated polyester resin moulded to 3mm thick FRP laminate for forming hollow rails and styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP panels and confirming to IS-14856-2000

S&F in repair sheet glass ordinary quality, 4-5 mm thick and glazing with aluminium glazing clip, rubber gasket etc in aluminium window any type in square complete all as specified and directed.

S&F stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm, fixed with stainless steel wire staples beads, tinned tacks to steel windows and wooden doors shutters complete.

S & F in repair Stainless steel, wire cloth 0.56 mm nominal dia of wire, and average width of aperature 1.18mm and fixed to steel or wooden window or doors with necessary fixing arrangement complete all as specified.

S&F Pressed steel frames of size/section for doors of section 125mmx60mm including 06 Nos hold fast of MS flat iron of size 25x5mm with one or more rebates including necessary fixing lugs, 3x hinges of 100mm, lock strike plate, filling hollow of frame and hold fast fixed with plain cement concrete 1:2:4 type B0 (using 12.5mm stone aggregate) and applying two coat of synthetic enamel paint, colour as approved over a coat of redoxide etc, complete, as specified,

S&F Pressed steel frames of size/section for doors of section 105mmx60mm with one or more rebates including necessary fixing lugs, 3 x hinges of 100mm , lock strike plate, filling hollow of frame with plain cement concrete 1:2:4 type B0 (using 12.5mm stone aggregate) and applying two coat of oil paint colour as approved over a coat of redoxide etc, complete, as specified,

S&F Flush shutters 30-35 mm thick, solid core construction, with block board core and ply wood face panels, commercial type on both sides with leaping and beading complete.

Mild steel conforming to Fe 410-0 or Fe 310-0 in framed work such as grills, gratings, door frame etc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; ladders; railings and similar work complete.

S&F Mild steel, plain, black sheet of 1.60 mm thick in wall cladding steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up mitred angles etc as required

S&F plate girder or single stanchions, Fe-410-W (Gde-E-250) built up of one beam or channel section with flange plates, caps bases. Splices, angle brackets cleats and other connections

Rolled mild steel sections conforming to Gde Fe-410-0 or Fe-310-0 as in guard bars, railing, support, steps and similar work complete.

M&L for running welding in repairs thickness of metal exc 6mm but n exc 9mm to be welded

Taking down/dismantling old particle board or any board kitchen cabinet with wardrobe including fillets and making good disturbed surfaces all assessary complete all as specified.

S&F 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in cupboard, kitchen cabinet etc all as specified and directed

Extra over rates of width 18/19mm of block board or veneered particle board for external teak wood lipping, 6mm thick fixed with nails

S&F 2nd class hard wood plain fillets square, rectangular or triangular in section of size exc 13 and n exc 25 Sqcm , wrought, secured with nails or brads to wall, column etc

S&F magnetic catches with steel body ‘H’ type, fixed to shutter complete.

S&F of Telescope basket/drawar (channel) 18/25 inch length extruded MS galvanised over rollers of approved make

S & F Continuous (piano) hinges of width 30mm when open flap) , mild steel, bright finish or electrogalvanised

S&F floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed to floor of size 140 mm complete.

S&F 100 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete

S&F 4 levers brass cupboard locks grade-I, size 65 mm

S&F 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete

S&F 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete

S&F butt hinges, 100 mm size medium weight, cold rolled mild steel complete

S&F aluminium handles 150 mm size cast type, anodised complete

S&F 300 mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete.

S&F Stainless Steel Cromium Plated tubing of 20 mm dia curtain rod fancy type including fancy type CP brabs brackets (wall to wall or flush to wall) with finials or end caps decorative type as approved by GE for securing to curtain rod to wall in position, fixed in repair complete.

M & L applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete.

M&L applying two coats of synthetic enamel paint on new steel surfaces of any description over 10cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete.

M&L for one coat of synthetic enamel paint on old steel painted surfaces including preparation of surfaces of any description not otherwise descriped over 10 cm width or grith complete all as specified and directed.

M&L for one coat of synthetic enamel paint on old wooden painted surfaces including preparation of surfaces of any description not otherwise descriped over 10 cm width or grith complete all as specified and directed.

Disconnecting existing tanks of capacity exc 250 Ltrs and n exc. 500 ltrs, setting aside (or lowering if required) for rapairs, cleaning, etc. and hoisting if required reconnecting and refixing in position. (Cleaning repairing, etc measured separately)

M&L for Cleaning and removing all scale and dirt, etc from tanks of capacity exc 250 & n exc 500 ltrs and from mouths of circulating pipes etc.

Shri Balaji Construction (BID ID -3262683)

M/S SURINDERAS CONSTRUCTION CO. (BID ID -3257268)

The new hut furnitures (BID ID -3257809)

M/S Parshant Associates (BID ID -3257940)