Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.2 LAccepted-AOC | L1 | Accepted-AOC Accepted being L1 bidder | |
| 2 | L2₹41.7 L+₹2.7 L (7.01%)Rejected-Finance | L2 | Rejected-Finance Not being L1 bidder | |
| 3 | L3₹45.6 L+₹6.6 L (17.0%)Rejected-Finance NEW JAIL ROAD UDHAMPUR 182101 J K | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L3 | Rejected-Finance Not being L1 bidder | |
| 4 | L4₹45.8 L+₹6.8 L (17.5%)Rejected-Finance | L4 | Rejected-Finance Not being L1 bidder |
Tender Value
₹46.7 L
EMD Value
₹93,500
Closing Date
3 Feb 2024, 10:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER SOUTH UDHAMPUR
Udhampur
ADDN ALTN IN BLDG NO T 118 AND PROVN OF STORE ROOM AT SAPPER ENCLAVE UNDER GE SOUTH UDHAMPUR
2024_MES_636036_1
GE/S(U)- /2023-24
Open Tender
Civil Works
Works
240 days
GE SOUTH UDHAMPUR
As per NIT
9 documents required · 9 mandatory
₹500
GE SOUTH UDHAMPUR
₹93,500
24 Feb 2024
6 Jan 2024
5 Feb 2024
6 Jan 2024
3 Feb 2024
20 Jan 2024
Amount
Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.
Dismantling wall and ceiling boards, fibre pulp insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.
Dismantling wrought iron or mild steel work in any description not otherwise specifically provided for complete all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.
Demolition of brickwork or stone/ boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework complete all as specified and as directed by Engr-in-charge or Garrison Engineer.
Taking down cement plaster from brick/concrete surfaces including raking out joints, hacking for key and scrubbing down with water etc complete all as specified and as directed.
Taking down chowkhat or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each including cutting holes for taking out hold fasts, dismantaling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) complete all as specified and as directed.
All as per ser item No 7 above but exc. 1.5 Sqm but n.exc 4 Sqm each, complete all as specified and as directed.
Taking up down steel water tubing and connection incl cleaning for refixing or removal to stores for bore in pipe 15 mm complete all as specifed and directed.
All as per ser item No 09 above but for bore in pipe 20 mm complete all as specifed and as directed.
Rolled sections of gde Fe 410 W (Gde E-250) quality A as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and as directed.
Pre painted galvalume aluminium zinc coating GI based corrugated sheets 0.63 mm thick of any colour having tensile strenght of 550/MPA as in roof covering, cladding to wall fixed with self taping screws complete all as specified and as directed.
Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.63 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
Providing and fixing Gl frame work for seamless ceiling comprising of GI perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.
10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat/ curved surface over GI frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately) Note : Design of POP ceiling will be as approved by GE
Preparation of new seamless ceiling surfaces and applying two coats of oil bound distemper white or tinted with roller application over a coat of chalk whitening primer over 3mm thick wall care putty complete all as specified and as directed by Engr-in-charge or Garrison Engineer.
Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed.
Bathroom vanity unit made of 15mm thick plywood board with melamine surface pasted inside and outside the cabinets with ceramic wash hand basin complete all as specified and as directed.
25 mm thick plain cement concrete type B1 1:2:4 (20 mm graded aggregate) as in sub base complete all as specified and as directed.
Ultra charged/ double charged vitrified ceramic tiles, 10 mm thick (square/rectangular) polished,area of each tiles n exc 0.36 sqm,in floors etc over 15 mm thick screed bed in cement mortar 1:4 set set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
Joint free non skid ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as specified and as directed by Engr-in-charge or Garrison Engineer.
Durastone heavy duty vitrified tiles 10 mm thick Sq/rectangular tiles area of each tile not esceeding 0.36 Sqm as in floors set and jointed in neat cement slurry and pointed in clooured cement to match the surface over 15mm thick screed bed in CM 1:4 complete all as specified and as directed.
Dismantling floor hearth or wall tiling including cement mortar beddig not backing and removing rubbish off the premises complete all as specified and as directed.
Light shade vitrified ceramic tiles, 10 mm thick (square/rectangular) polished,area of each tiles n exc 0.36 sqm,in skirtings etc over 10 mm thick back coat in cement mortar 1:3 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
Glazed ceramic digital coloured tiles 600 x 300/450 x 7-8mm thick as in skirting / dados with combination of dark, light and highlighter shade tiles set and jointed in neat cement slurry and pinted in white or coloured cement to match over 10 mm back coat in CM 1:3 complete all as specified and as directed.
Demolition of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar as in kitchen platform, floors, aprons etc complete all as specified and as directed.
Granite slab 20 mm thick as in pillars, window cill, cooking platform and the like in cement motar 1:4 including painting in white cment 1:2 using marble dust with a mixture of pigment to match the shade of granite including cutting polishing and moulding on edges complete all as specified and as directed.
Rounding to edges of stone slabs one edge, such as in steps , cooking platform, and other similar situations complete all as specified and as directed.
Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.
Walling of random rubble, uncoursed, well bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed.
Rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work/ stone masonry or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and as directed. Note : Liquid WPC will be measured and paid separately.
10mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces including finishing even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge or Garrison Engineer.
Supply only water proofing compound (liquid), ISI marked complete all as specified and as directed.
Rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work/ stone mansonry or concrete surfaces, and finished the surfaces even and fair without using extra cement complete all as specified and as directed.
Preparation of new plastered wall surfaces and applying two coats of oil bound distemper white or tinted with roller application over a coat of chalk whitening primer over 3mm thick wall care putty complete all as specified and as directed by Engr-in-charge or Garrison Engineer.
Preparation of new plastered wall/facia surfaces and applying two coats of apex advanced weather proof emulsion paint over a priming coat of exterior primer (colour of apex advance weather proof emulsion paint as approved by GE) and complete all as specified and directed.
Preparation of new plastered surfaces of walls and applying two coats of cement based paint white or tinted over a coat of chalk whitening primer complete all as specified and as directed by Engr-in-charge or Garrison Engineer.
Preparation of new steel surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel painting over a coat of red oxide primer complete all as specified and as directed by Engr-in-charge or Garrison Engineer.
Preparation of old steel surfaces of any description, not otherwise described over 10cm width or girth and applying one coats of synthetic enamel painting complete all as specified and as directed by Engr-in-charge or Garrison Engineer.
Preparation of old wooden surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel painting complete all as specified and as directed by Engr-in-charge or Garrison Engineer.
Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories, area not exceeding 2 sqm each (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.)
Providing and fixing factory made uPVC white colour Sliding window/ door three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories, area exceeding 2 sqm each (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.)
Supply and fix 5.5 mm thick sheet glass, ordinary quality and glazing with rubber beading around the glass, in squares exc 0.50 sqm in each pane complete all as specified and as directed.
8mm Toughned glass (tinted glass one side view) as in windows, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and as directed.
5.5 mm thick sheet glass, frosted or grounded on one side with rubber beading around the glass, in squares exc 0.50 sqm complete all as specified and as directed.
Decorative solar control film 25 micron reflective type sticked to glass panes as per instruction of manufacturer including removal of existing complete all as specified and as directed.
Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples as in windows and POP ceiling work complete all as specified and as directed.
Venetian blinds of approved make, vertical type using 100mm wide fabric blinds of approved colour/ shade and pattern including operating arrangement such as chord/ thread, counter weight, connecting chain etc., and necessary fittings complete all as specified and directed.
Welded steel wire fabric n,exc 4kg per sqm, supplied and fixed complete to wood or steel members complete all as specified and as directed.
Repairs drapery rod of 25mm dia stainless steel decorative along with brackets and end caps of quality as approved by GE.
2nd class hardwood plain solid straight chowkats and frames wrought framed rebates on the solid, rounded or chamfered put together with glue pinned at joints supplied and fixed complete all as specified and as directed.
S&F in repairs 12mm thick with 7 ply veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces fixed with screws to timber frame work as in cupboard, shutters, cabinets complete all as specified and as directed.
Continuous (piano) hinges, mild steel,bright finishor electrogalvanised width of flaps (when open) 30 mm complete all as specified and as directed.
100mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.
Magnetic catches brass body and striking plate including letting in and fixed suitable for cupboard shutters complete all as specified and as directed.
75 mm decorative Brass handles, cast type, polished bright complete all as specified and as directed.
Rotational molded (three layered as per IS 12701) polyethylene water storage storage tank (cylindrical vertical with closed threaded top) hoisted and fixed in position including connecting inlet/outlet pipe connecting with necessary fittings all as required at site and specified in SSR part -I of capacity 1000 litres and dismantling of old UNSV water tank of same capacity all as specified and directed by Engr-in-Charge aor Garrison Engineer
Supply and fixing "as in repair" ball valves of size 20mm bore dia high pressure of PTMT (Make-Prayag) with epoxy coated aluminium rod and high density plastic ball (Minimum weight not less than 210 gms) screwed for iron pipe and fixed including necessary fitting as reqd at site complete all as specified and directed by Engr-in-Charge
S&F steel water tubing medium grade GI with all fitting and fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc) of nominal bore 15mm complete all as specified and directed.
All as per Ser Item No 60 above but nominal bore 20mm complete all as specified and directed.
Supply and fixing "as in repair" stop valves/angle valve of 15 mm bore, but fancy type, chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions including necessary fitting as required at site complete all as specified and directed by Engr-in-Charge or Garrison Enginner. Make : Jaquar cat No LYR-38053/Cera/Prayag/KOHLER / MARC /HR Johnson /Parryware
Supply and fixing "as in repair" stop valves of 20 mm bore, but fancy type, chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions including necessary fitting as required at site complete all as specified and directed by Engr-in-Charge. Make : Jaquar/Cera/Prayag/KOHLER / MARC /HR Johnson /Parryware
Supply and fix in repairs Bib tap 15 mm bore, brass, chromium plated, fancy type with crutch or butterfly handle conforming to IS screwed down, screwed for iron pipes or for brass ferrule complete all as specified and as directed. Make : Jaquar cat No ARI-39037/Cera/Prayag/KOHLER / MARC /HR Johnson /Parryware
Supply and fix in repairs two way Bib tap 15 mm bore, brass, chromium plated, fancy type with crutch or butterfly handle conforming to IS screwed down, screwed for iron pipes or for brass ferrule complete all as specified and as directed. Make : Jaquar cat No ARI-39041/Cera/Prayag/KOHLER / MARC /HR Johnson /Parryware
Repairs sink mixer with regular swinging spout (wall mounted model) with connecting legs and wall flanes, 15 mm bore, brass, chromium plated, fancy type with crutch or butterfly handle conforming to IS screwed down, screwed for iron pipes or for brass ferrule complete all as specified and as directed. Make : Jaquar cat No ARI-39309/Cera/Prayag/KOHLER / MARC /HR Johnson /Parryware
Supply and fix in repairs long body Bib tap 15 mm bore, brass, chromium plated, fancy type with crutch or butterfly handle conforming to IS screwed down, screwed for iron pipes or for brass ferrule complete all as specified and as directed. Make : Jaquar cat No CON-107KN/Cera/Prayag/KOHLER / MARC /HR Johnson /Parryware
Repairs fancy type single lever basin mixer Pillar tap, cast copper alloy, with capstan heads, chromiuk plated, screwed down high pressure with or without lettered "HOT" or "COLD" with long screwed shanks and fly nuts, screwed for iron pipe of bore 15mm complete all as specified and directed Make : Jaquar Cat No ARI-39001B/Cera/Prayag/KOHLER / MARC /HR Johnson /Parryware
Repair water closet white vitreous china ware Orissa pattern of size 580x440mm with integral foot rest ‘P’ or ‘S’ trap 100mm dia front or back inlet incl provision of PCC bedding type B1, 1:2:4 ( 20 mm graded aggregate) and connection pipes ( excluding flushing cistern but including flushing pipe 32 mm dia MS chromium plated) (rate also include for taking off unhygienic of WC).
Supply and fix in repairs vitreous china wash hand basin white flat back size 550x400mm excluding taps waste chain and plug and porcelain stopper but including brackets waste fitting brass chromium plated 32mm dia with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed etc complete all as specified and as directed by Engr-in-charge or Garrison Engineer.
Repairs Brass wall mixer, Chromium plated 3 in 1 system with provision of both telephone shower and overhead shower complete with 115 mm long bend pipe and wall flange all as per Cat No.8275 of Prayag or Cat. No.CON-281KN of Jaquar or T1723C of HR Johnson or G1417A1 of Parryware or equivalent of KOHLER / MARC complete all as specified and as directed.
Repairs hand shower fixed complete all as specified and as directed. Make : Jaquar cat No HSH-1737/Cera/Prayag/KOHLER / MARC /HR Johnson /Parryware
Repairs Vitreous China wash basin white, flat back of size 170 x 500 x 430 mm excluding tap, chain, plug and porcelain stopper but including brackets and cutting for and pinning in ends of brackets complete all as specified and directed. Make : Jaquar Cat No KUS-WHT-2179/Cera/Prayag/KOHLER / MARC /HR Johnson /Parryware
Repairs PVC connection 15 mm size with PTMT Nuts of length 450 mm complete all as specified and directed
PVC waste pipe for WHB/Sink 32 mm/ 40 mm bore with one end with socket complete all as specified and directed.
Sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm.
S&F in repairs Matt finish stainless steel sink, double bowl , made out of 1mm thick sheet for kitchen or laboratory with plug, washers, waste pipe, cast iron cantilever brackets connecting union overall size 810 x 510 x 203 mm with bowl size 405x354x203mm fixed complete all as specified and as directed by Engr-in-charge or Garrison Engineer. Make : Prayag Cat No 1232DM or equivalent Blue star/Neelkanth/Nirali/ Jayana/Silvershine.
S&F in repairs PVC valveless, syphonic action, flushing cistern low level 10 ltrs capacity, white with inlet ball valve float and handle including brackets and flush pipe of polyethylene of low or high quailty PVC 32mm dia complete all as specified and as directed by Engr-in-charge or Garrison Engineer.
Repair CP tubular towel rail , 600mm long between flanges aluminium anodised, fixed with rawl plugs complete all as specified and directed. Make : Jaquar cat No CAN-1111NM/Cera/Prayag/KOHLER / MARC /HR Johnson /Parryware
Repairs Brass CP Over head Shower rose 200X200mm Square shaped single flow CP with and including shower arm 400mm x 25mm x25mm square shaped for wall mounted showers, ABS body chrome plated with gray face plate with rubit cleaning system screwed for iron pipe of 15mm complete all as specified and directed. Make : Jaquar cat No OHS-1819/Cera/Prayag/KOHLER / MARC /HR Johnson /Parryware
Repairs Brass chromium plated shower rose 125mm size including shower arm all as specified and directed
Repairs stainless steel grating doom 100mm dia complete all as specified and as directed by Engr-in-charge or Garrison Engineer or Garrison Engineer.
CP towel rack 600 mm long with lower hangers all as specified and directed Make : Jaquar cat No ACN-1181N/Cera/Prayag/KOHLER / MARC /HR Johnson /Parryware
Repair sheet glass shelf assembly 500 x 125 mm consisting of 5.5 mm thick sheet glass shelf with chromium plate bracket guard and railing 60 cm long . Prayag Cat No BEA-47/Jaquar/Cera/KOHLER / MARC /HR Johnson /Parryware
Repair corner glass shelf with chromium plate bracket guard and railing all as specified and directed
Repair gun metal globe gate valve 20 mm bore complete all as specified and directed.
Repairs one unit EWC of Make : Jaquar Cat Part No ZPS-WHT-1028 complete all as specified and directed .
Repairs CP health faucet with 8mm dia 1.00m long flexible tube and wall hook with all accessories all as aproved Make : Jaquar cat No ALD-CHR-579/Cera/Prayag/KOHLER / MARC /HR Johnson /Parryware
Stainless steel Plate rack of size 780mm x 910 x 250mm (31"x36"x10") with separators and 3 tier shelves, provisioning of hook 9 Nos made out of stainless steel sheet of grade AI SI-304 and fixed in repairs complete all as per Cat No P-348 of Prayag or equivalent all as specified and as directed.
Dismantling cast iron pipe & reinforced concrete drain pipes, jointed in cement mortar of any dia taking out from trenches or fixed to wall upto 100mm complete all as specified.
100mm Cast iron soil sand cast pipes,waste and vent in any length withor without ears, with cement joints,laid in trenches or in floors complete all as specified and as directed.(ISI Marks).
All as per item 93 above but 75 mm complete all as specified and as directed.
100mm Cast iron soil sand cast pipes,waste and vent in any length with or without ears, with cemeent joints, fixed to walll complete all as specified and as directed.
All as per item 95 above but 75 mm complete all as specified and as directed.
50mm Cast iron soil sand cast pipes,waste and vent in any length withor without ears, with cemeent joints,fixed to wall complete all as specified and as directed.
Salt glazed stone ware gully traps square or round mouthed, type P of size 150x150mm set and jointed to drain pipe with cement mortar (1:1) including demolition of old unserviceable gully traps complete all as specified (ISI Marks).
Cast iron bends (any radius diminishing pieces or tapes (larger bore measured), 75mm bore fitted with oval access door fixed with rubber ring joints as in repairs complete all as specified and as directed.
All as per item 99 above but 100 mm complete all as specified and as directed.
75mm Cast iron floor traps with grating including jointing to waste pipe fixed cncrete type B1 (1:2:4). complete all as specified and as directed.(ISI Mark)
Cast iron branch pieces, single/double (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches 100 bore, fitted with oval access door as in repairs complete all as specified and as directed.
All as per item 102 above but 75 mm complete all as specified and as directed.
50 mm Cast iron cowls complete all as specified and as directed.
Cast iron Reducer 100mm for connecting and fixing gas pipe on walls as in repairs complete all as specified and as directed.
All as per item 105 above but 75 mm complete all as specified and as directed.
Demolition of cement concrete of any description and in any position not otherwise specifically provided complete all as specified and as directed.
Providing precast cement concrete louvers and jallies, 50mm thick (measured solid) including all mouldings set in cement mortar 1:6 type B0 1:2:4 (Using 12.5 mm graded stone aggregate) complete all as specified and as directed by Engr-in-charge or Garrison Engineer.
S&F in repairs 18/19 mm thick prelaminated particle board, exterior grade , prelaminated one side with decorative choice lamination and other side balancing white lamination , fixed with screws to timber frame, as in kitchen cabinets and cupboard shutters, built in cupboards including soft close hetich hinges (wherever required in shutters) work complete all as specified and as directed.
S&F in repairs 12mm thick Plywood, grade BWP, type BB fixed with screws to timber frame work complete all as specified and as directed.
0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and as directed..
Stainless steel cutlery organiser set of size 0.45 x 0.60 fixed in drawer of kitchen cabinets including stainless steel telescopic channels complete all as specified and as directed.
Stainless steel two shelves bottle pull outs set of size 0.60 x 0.60 fixed in drawers of kitchen cabinets including stainless steel telescopic channels complete all as specified and as directed.
Stainless steel plate basket set of size 0.45 x 0.60 fixed in drawers of kitchen cabinets including stainless steel telescopic channels complete all as specified and as directed.
Stainless steel three shelves oil pull out basket of size 0.45 x 0.60 fixed in drawers of kitchen cabinets including stainless steel telescopic channels complete all as specified and as directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth, for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc n exc 10 sq m on plan and n exc 1.5m in depth and getting out in any type of soil complete all as specified and as directed.
Plain cement concrete type D-2, 1:4:8 (Using 40mm graded stone aggregates) as in sub base complete all as specified and as directed by Engr-in-charge or Garrison Engineer.
Solid PVC wall lining (wall panelling design and colour shall be approved by Engr in Charge) consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site including all fixing accessories like PVC frames/fillets etc on PVC frame complete all as specified and as directed.
Demolition of cement concrete (reinforced) as in roof, floors (other than ground floor), beams, staircase, landing, chajjas and similar suspended work,complete all as specified and as directed.
Design Mix Reinforced cement concrete M-25 as slabs supported on walls, beams and columns, in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.,
Use and waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick surface horizontal or sloping, fair finished surface of concrete complete all as specified and as directed.,
Mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping ends and binding with and incl mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed.
Mild steel TMT bars 5mm dia and over including 10mm dia in stirrups, spacers and binders, cut to length bent to shape required including cranking bending spirally for hooping ends and binding with and incl mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.
Removing excavated material n exc 50 m and depositing where directed at a level n exc 1.5m above the starting point
Pressed steel frames for doors made out of 1.25mm thick MS sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate ,12mm bar thresh hold etc. complete , of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and as directed.
Pressed steel frames for doors made out of 1.25mm thick MS sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate ,12mm bar thresh hold etc. complete , of frame size 105 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and as directed.
Plain cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregates as in filling of pressed steel door frame all as specified and as directed.
35 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial tpe on both sides covered with decorative face venner with lipping/ frame to match complete all as specified and as directed.
35 mm thick 2nd class hardwood partly glazed and skeleton and party panelled shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cat and mitred beads for securing glass etc fitted to chowkats for windows, ventilators,etc complete, size of member of shutter as spd in SSR Part -I, Sec 8, clause 8.24 (b) complete all as specified and as directed..
100 mm long aluminium anodised tower bolts, fixed in screws complete all as specified and as directed by Engr-in-charge or Garrison Engineer.
Supply and fix in door handle, 100 mm size, aluminium anodised, complete all as specified and as directed by Engr-in-charge or Garrison Engineer.
300mm long aluminium anodised, sliding door bolt with hasp, stapple (bolt type) and fixing clip of sheet, and fixing bolts and sliding bolts of stainless steel complete all as specified and as directed by Engr-in-charge or Garrison Engineer.
150 mm size (Overall length of cover plate) floor door stopper of aluminium body and tongue, anodised, with hard drawn steel spring complete all as specified and directed.
Repairs mild steel, 300 mm, ordinary rat tail rod pattern door spring including roller and roller plate, fixed to frame, complete all as specified and as directed.
Powder coated aluminium door strip with brush, width of flap 30mm complete all as specified and as directed.
Preparation of wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coat of synthetic enamel painting over a coat of pink primer complete all as specified and as directed by Engr-in-charge or Garrison Engineer.
Providing of treating the soil along with external perimeter of building at the rate of 2.25 litre of Antitermite treatment chemical emulsion per metere of the perimeter wall, complete all as specified and as directed by Engr-in-Charge. Note : The treatment work shall be carried through authorized agency only, and certificate for the same ofr warranty shall have to be furnished before submitting payment)
Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed.
Hardcore of gauge of borken stone or boulders n exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.
Providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and as directed.
Sand filling as a cushioning/ bedding complete all as specified and as directed by Engr-in-charge or Garrison Engineer.
Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 gradewith grey cement and no pigment complete all as specified and as directed by Engr-in-charge or Garrison Engineer.
Providing Reinforced cement concrete 1:2:4 type B-0 ( using 12.5 mm graded aggregate) as coping and the like, including weathering, slightly rounded or chamfered angles and throating all as specified and directed
Use and waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick surface horizontal or sloping, fair finished surface of concrete complete all as specified and as directed.
Taking down carefully, copper/ aluminum point wiring (light, fan, socket or power) complete including fitting such as switch, sockets, ceiling rose, pendants socket,fan regulators any type, rectangular board ,light fittings,terminal boxes etc removing materials for taking credit and making good disturbed surfaces of walls floors and ceiling complete all as specified and as directed.
Taking down carefully copper/aluminium sub main wiring of size 2.5/4/6 sqmm from surface/concealed at any height and removing the materials from site and making good the disturbed surfaces of walls,floors roofs etc complete all as specified and directed.
Taking down Old/ Unserviceable MCB DBs TPN / Main Switches by disconnection of electric connection including old unsv MCCBs,MCBs, isolators etc and making good to distrubed surface complete all as specified and directed.
Point wiring for one light/ fan/bell point controlled by one switch using 1.5 Sq mm FRLS copper conductor cables (multistanded) PVC insulated and unseathed in and including PVC concealed conduit as per site requirement (thickness not less than 1.5mm and 20mm dia), medium grade with Modular sunken boxes & PVC back plate for mounting modular type switches, sockets & regulators etc with front plate modular type including supplying and laying PVC insulated unsheathed 1100 volts coppper conductor cable 1.5 Sq mm as earth wire stranded and conected to earth dolly as specified.Note:- Cutting and making same the wall patchs after laying the wire and conduit using putty, white wash and distamper. The surface should be made smooth using putty and should match exactly with the existing wall finish complete all as specified and as directed.
All as per srl item No 149 but for 3 pin 6 Amps socket outlet independent board including PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly complete all as specified and as directed.
All as per srl item No 149 but for 3 pin 6 Amps socket outlet on the same board including PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly.
All as per Srl item No 149 but for 3 Pin 16 Amps socket outlet independent board with cable 2.5 Sq mm including copper PVC insulated PVC unsheathed 1.5 sq mm earth wire standard and connected to earth dolly.
S&F for modular switch 6 Amps single pole one way 230 V, 50 Hz, AC , with outer strip complete all as specified and directed by Engr In charge or Garrison Engineer.
S&F for modular switch 16 Amps single pole one way 230 V, 50 Hz, AC , with outer strip complete all as specified and directed by Engr In charge or Garrison Engineer.
S&F for modular socket 3 Pin 6 Amps flush type 230 V, 50 Hz, AC , with outer/inner cover complete all as specified and directed by Engr In charge or Garrison Engineer.
S&F for modular socket combined 2-in-1, 6 Pin 6 & 16 Amps 230 V, 50 Hz, AC , flush type with outer/inner cover complete all as specified and directed by Engr In charge or Garrison Engineer.
M &L Ceiling rose, surface bakelite 65x 50mm two to three terminals fixed on PVC Round Blockcomplete all as specified and directed by Engr In charge or Garrison Engineer.
S & F in replacement sheet metal enclosures for DBs when MCBs to be used double door DB VTPN MCCB 125A 4way IP43 Protection Make: Indoasian, Cat Pt No - 811888 with 125A MCCB 16kA. Make: Indoasian, Cat Pt No - 830153 or equivalent to Make Legrand/ Schneider.
S&F Sheet metal enclosure double door type for DBs (when MCB to be used) 12 way 240 volts with 200 Amps rated busbar and neutral link including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.
S & F in replacement MCB Single pole and neutral 240 volt any rating from 40 amps"C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable complete all as specified and directed.
S & F in replacement MCB single pole 240 volt any rating from 10 to 40 amps "C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable complete all as specified and directed.
S & F in replacement MCB single pole and neutral 240 volt any rating from 63 Amps "C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable complete all as specified and directed.
S&F Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 6 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 6 Sq mm as earth lead all as specified. Including taking down old sub main wire (For TPN DB to SPN DB) complete all as specified and directed.
S&F Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 4 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 2.5 Sq mm as earth lead all as specified. Including taking down old sub main wire (for AC & Geyser) complete all as specified and directed.
S&F Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 2.5 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 1.5 Sq mm as earth lead all as specified. Including taking down old sub main wire(For street light ) complete all as specified and directed.
Earthing complete with galvanized steel earth plate electrodes 600 mmx600 mm x6.3 mm thick buried directly in ground earth plate not less than 2.25 m deep below normal ground level with top edge of the plate not less than 1.5 m below normal ground level connected to and including galvanized steel earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and steel including PCC pit in PCC 1:2:4 type B-1using 20 mm graded crushed stone aggregate, RCC frame with 40mm thick RCC cover reinforced with 8mm dia deformed bars handle. including excavation and earth work in any type of soil medium grade GI watering pipe 20mm bore with funnel and wire mesh and light grade GI protection pipe 15mm bore main board complete all as shown in electrical plate No 5 connected to main control board all as specified and testing on completion. Note: Excavation earthwork charcoal PCC pit is covered under this item including taking out existing earth plate etc.Note: if earth resistance of earthing is not found (2 to 5 Ω) satisfactory if will be redone by the contractor on his risk and cost.
S&F electronic step type fan regulator 120 watt 230 volts 50Hz two module C/S deluxe type complete all as specified and directed.
Taking down ceiling fan of any size after disconnecting the wire from existing ceiling rose and depositeed to MES Store (AGE E/M sub Divn) and Supply & fix ceiling fan complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with burshless direct current motor (BLDC) all as specified & directed by Engr-in-charge or Garrison Engineer.
Taking down exhaust fan of any size after disconnecting the wire from existing ceiling rose and depositeed to MES Store (AGE E/M sub Divn) and Supply & fix exhaust fan, steel body, AC single phase 230/240 volts heavy duty of size 300mm sweep with blades, frame, louvers and all fixing arrangements as all as specified & directed by Engr-in-charge or Garrison Engineer.
S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 Ltr, BEE 5 star rated complete with all accessories such as safety valve, thermostate , NRV, connection piece etc complete all as specified and directed by Engr-in-Charge or Garrison Engineer.
LED 15Watt Recess Mounting fitting Round/Square type,Housing made of extruded PC with lumen O/P should not be less than 100 lum/watt making all connection using flexible cable of suitable size from ceiling rose to fitting including taking down old one complete all as specified and directed.
S&F LED 12 Watt Recess mounting fitting round/squre type, Housing made of extruded PC with lumen O/P should not be less than 100 lum/watt making all connection using flexible cable of suitable size from ceiling rose to fitting including taking down old one complete all as specified and directed.
S&F LED 06 Watt Recess mounting fitting round/squre type, Housing made of extruded PC with lumen O/P should not be less than 100 lum/watt making all connection using flexible cable of suitable size from ceiling rose to fitting including taking down old one complete all as specified and directed.
Supply and fixing LED lights fitting 1x 20W, 230V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
S&F Venza decorative wall mounting light fitting, SS finish fixture with opal glass diffuser including 12W retrofit LED bulb and making all connection using flexible cable of suitable size from ceiling rose to fitting including taking down old one complete all as specified and directed.
Supply and fixing LED building security light fitting 30 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp,clamps,suitable bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.
S&F Street light Bracket complete made of GI pipe of suitable size, medium grade 1.2 m long bent to shape as per site requirement along with MS flat iron clamps with nuts, bolts, washers including grouting the same with wall , all as specified and directed by Engr- in-Charge or Garrison Engineer.
Replacement of Sheet metal enclouser single pole and neutral with 2 pin and earth plug and socket 20A 240V complete with one double pole MCB capacity 25 Amp, C Curve, 10KA complete all as specified and directed by Engr-in-charge or Garrison Engineer.
Material & Laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with "XLPE" insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 25 Sqmm x 3.5 core size all as specified including taking down old cable.Note : Earth work and other connected work shall be measured & paid sperately complete all as specified and directed..
Dry sand for sand cushioning to under ground cable 8 cms thick before laying the cable before and 15 cms thick after laying & streching the cable in trenches, including hand punning and consolidating complete as specified. Note : for payment purpose punned thickness shall be measured
Bricks sub class 'B' brick laid dry, flat with width equal to length of brick as cover laid over the cabel to give mechanical protection to underground cabels complete all as specified and directed.
Supply and fixing GI tubing light grade 40 mm dia along the wall/ in trenches/ in duct / in culvert /road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holdining of GI pipe alongwith poles all as specified and directed.
jyoti parkash sharma
SINGH CONST CO
RAMAN CONSTRUCTION CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .